Synthesis and phase stability of precursor derived HfO2/Si–C–N–O nanocomposites
Source abstract
Abstract
Abstract Hafnium alkoxide modified polysilazane was synthesized by the drop-wise addition of hafnium tetra(n-butoxide) to polysilazane. The solid state thermolysis (SST) temperature and the ceramic yield for both the polysilazane and modified polysilazane were determined by performing thermogravimetry. Fourier transform infrared spectroscopy was performed to understand the polymer to ceramic conversion as well as the bonding characteristics of the ceramics. The modified polymer after crosslinking was subjected to SST at 800 °C at a constant heating rate of 5 °C/min for a dwell time of 2 h in atmospheric ambience. From the X-ray diffractograms, the as-thermolysed ceramics were observed to remain X-ray amorphous and on heat-treatment resulted in the crystallization of tetragonal hafnia. However, on heat-treatment at 1500 °C, reverse phase transformation from tetragonal to monoclinic hafnia was observed. Raman spectroscopy and transmission electron microscopy were employed to further understand the phase evolution. The thermal stability and the influence of amorphous matrix on the coarsening of HfO2 were also evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Development of a silicon carbide fiber with high tensile strength10.1038/261683a0 ↗
2. Effect of pyrolysis temperature on the piezoresistivity of polymer-derived ceramics10.1111/j.1551-2916.2010.04330.x ↗
3. Ultra figure-of-merit for hydrogen generation from sodium borohydride using ternary metal catalysts10.1016/j.jpowsour.2010.07.037 ↗
4. Polymer derived ceramics: 40 years of research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
5. Crystallization and creep behavior of Si–B–C–N10.1016/j.actamat.2005.06.011 ↗
6. Role of length scale and temperature in indentation induced creep behavior of polymer derived Si–C–O ceramics10.1016/j.msea.2010.08.016 ↗
7. Cfiber/SiCfiller/Si–B–C–N matrix composites with extremely high thermal stability10.1016/j.actamat.2009.05.033 ↗
8. Effect of boron on the crystallization of amorphous Si–(B)–C–N polymer derived ceramics10.1016/j.jnoncrysol.2009.08.010 ↗
9. An elasticity of precursor derived Si–B–C–N ceramics10.1016/j.jeurceramsoc.2006.04.023 ↗
10. Oxidation induced effects on the creep properties of nano-crystalline porous Si–B–C–N ceramics10.1016/j.msea.2006.09.024 ↗
11. Effect of nitrogen content on electronic structures and properties of SiBCN materials10.1016/j.actamat.2010.12.030 ↗
12. Polymer-derived Si–Al–C–N ceramics resist oxidation at 1400°C10.1016/j.scriptamat.2006.05.004 ↗
13. SiAlON ceramics from preceramic polymers and nano-sized fillers: application in ceramic joining10.1016/j.jeurceramsoc.2011.02.035 ↗
14. Ceramic composites derived from Ti/Al/Al2O3-filled polysilsesquioxane
15. Engineering of silicon-based ceramic fibers: novel SiTaC(O) ceramic fibers prepared from polytantalosilane10.1016/j.msea.2010.07.087 ↗
16. Polymer-derived SiOC/ZrO2 ceramic nanocomposites with excellent high temperature stability10.1111/j.1551-2916.2009.03395.x ↗
17. Amorphous silicon carbide fibers drawn from alkoxide modified ceraset10.1111/j.1151-2916.2003.tb03493.x ↗
18. Oxidation behavior of SiCN–ZrO2 fiber prepared from alkoxide modified polysilazane10.1111/j.1551-2916.2004.01556.x ↗
19. Polymer-derived silicon oxycarbide/hafnia ceramic nanocomposites. Part I. Phase and microstructure evolution during the ceramization process10.1111/j.1551-2916.2010.03765.x ↗
20. Polymer-derived silicon oxycarbide/hafnia ceramic nanocomposites. Part II. Stability toward decomposition and microstructure10.1111/j.1551-2916.2009.03527.x ↗
21. Novel composites constituted from hafnia and a polymer derived ceramic as an interface: phase for severe ultrahigh temperature applications10.1111/j.1551-2916.2007.01879.x ↗
22. Strong influence of polymer architecture on the microstructural evolution of hafnium alkoxide modified silazanes upon ceramization10.1002/smll.201001938 ↗
23. Raman scattering in HfxZr1−xO2 nanoparticles10.1103/PhysRevB.71.115408 ↗
24. Size dependent polymorphism in HfO2 nanotubes and nanoscale thin films10.1063/1.3243077 ↗
25. The development of rare earth pyrohafnates for power reactor control rod materials10.1016/0022-3115(73)90056-1 ↗
26. First principle study of structural, vibrational and lattice dielectric properties of hafnium oxide10.1103/PhysRevB.65.233106 ↗
27. Si–B–C–N ceramic precursor derived from dichlorodivinylsilane and chlorotrivinylsilane. 1. Precursor synthesis10.1021/cm021178i ↗
28. Synthesis and polymer- to-ceramic conversion of tailorable polysilazanes
29. Effect of ambient atmosphere on crosslinking of polysilazanes10.1002/app.32777 ↗
30. Fabrication and characterization of fully dense Si–C–N ceramics from a poly(ureamethylvinyl)silazanes10.1016/j.jeurceramsoc.2008.05.028 ↗
31. Plasma enhanced atomic layer deposition of HfO2 and ZrO2 high-k thin films10.1116/1.1894666 ↗
32. Materials characterization of ZrO2–SiO2 and HfO2–SiO2 binary oxides deposited by chemical solution deposition10.1063/1.1382851 ↗
33. Thermodynamic modeling of the Hf–Si–O system10.1016/j.calphad.2006.08.006 ↗
34. The occurrence of metastable tetragonal zirconia as a crystallite size effect10.1021/j100888a024 ↗
35. Characterization of metastable tetragonal hafnia10.1016/0390-5519(79)90021-8 ↗
36. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
37. R. Sujith, A.B. Kousaalya, Ravi Kumar, Coarsening induced phase transformation of hafnia in polymer derived Si–Hf–C–N–O ceramics, J. Am. Ceram. Soc., doi:10.1111/j.1551-2916.2011.04719.x, in press.10.1111/j.1551-2916.2011.04719.x ↗