journal article·2014-12

Effect of V 2 O 5 addition on the properties of reaction-bonded porous SiC ceramics

Yu Li, Cheng-ying Bai, Xiang-yun Deng, Jian-bao Li, Ya-ni Jing, Zhang-min Liu

Ceramics International· Volume 40· Issue 10
Publisher page

Abstract

Abstract Mullite-bonded porous SiC ceramics were prepared with and without V2O5 addition in air by an in situ reaction bonding technique. This process is based on the oxidation of SiC and the mullitization between oxidation-derived SiO2 and Al2O3. The effects of V2O5 addition on the phase composition, microstructure, open porosity, flexural strength and pore size distribution of porous SiC ceramics were investigated. With the addition of V2O5, the mechanical properties of porous SiC ceramics were improved. It was found that the V2O5 addition strongly promoted the phase transformation towards mullite and reduced the temperature of mullitization by nearly 400 °C. When 4 wt% V2O5 was added, a high strength of 30.11 MPa was achieved at an open porosity of 42.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. The effect of sintering temperature on some properties of Cu–SiC composite10.1016/j.jallcom.2011.02.170 ↗
2. Development of open-pore silicon carbide foams10.4028/www.scientific.net/KEM.132-136.1731 ↗
3. Thermal conductivity of porous SiC composite ceramics derived from paper precursor10.1016/j.ceramint.2010.05.028 ↗
4. Effect of crystallization on creep of clay bonded SiC filters10.1002/9780470294499.ch5 ↗
5. She · J. Am. Ceram. Soc. · 2002 · 85 · 285210.1111/j.1151-2916.2002.tb00542.x ↗
6. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
7. Effect of alkaline earth metal oxide addition on flexural strength of porous mullite-bonded silicon carbide ceramics10.1007/s10853-010-4939-9 ↗
8. Core rim structure of liquid-phase-sintered silicon-carbide10.1111/j.1151-2916.1993.tb03677.x ↗
9. Oxidation bonding of porous silicon carbide ceramics
10. Molten salt synthesis of mullite whiskers on the surface of SiC ceramics10.1016/j.jallcom.2013.07.203 ↗
11. Effect of aluminum source on flexural strength of mullite-bonded porous silicon carbide ceramics10.2109/jcersj2.118.13 ↗
12. Fabrication of mullite-bonded porous silicon carbide ceramics by in situ reaction bonding10.1016/j.jeurceramsoc.2006.06.003 ↗
13. Effect of aluminum hydroxide content on porosity and strength of porous mullite-bonded silicon carbide ceramics10.2109/jcersj2.119.367 ↗
14. Effect of submicron silicon carbide powder addition on the processing and strength of reaction-sintered mullite-silicon carbide composites10.2109/jcersj2.117.421 ↗
15. Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics10.1016/j.ceramint.2005.03.024 ↗
16. Hot corrosion of SiC ceramics by V205 melt10.1007/BF01045359 ↗
17. Effect of V2O5 on the properties of mullite ceramics synthesized from high-aluminum fly ash and bauxite10.1016/j.jhazmat.2008.11.059 ↗
18. Oxidation of silicon carbide10.1111/j.1151-2916.1959.tb13582.x ↗
19. Oxidation behavior of silicon carbide10.1111/j.1151-2916.1958.tb12932.x ↗
20. In-situ reaction bonding of porous SiC ceramics10.1016/j.matchar.2006.12.002 ↗
21. Anisotopic grain growth in seeded and B2O3 doped diphasic mullite gels10.1016/0955-2219(95)00144-1 ↗
22. Mullite phase enhancement in Indian kaolins by addition of vanadium pentoxide10.1016/j.clay.2009.12.008 ↗
23. Role of V2O5 on the formation of chemical mullite from aluminosilicate precursor10.1016/j.ceramint.2010.02.038 ↗
24. Influence of transition metal ions on the textural properties of alumina and aluminosilicates10.1023/A:1014889216112 ↗
25. Preparation of mullite fibers from aluminium isopropoxide-aluminium nitrate-tetraethylorthosilicate solution by sol–gel method10.1016/S0167-577X(97)00268-1 ↗
26. Sintering of a-Al2O3 amorphous silica com-pacts10.1016/0272-8842(82)90015-3 ↗
27. Fabrication and properties of cordierite –mullite bonded porous SiC ceramics10.1016/j.ceramint.2013.11.078 ↗
28. Fabrication and characterization of cordierite-bonded porous SiC ceramics10.1016/j.ceramint.2008.01.025 ↗
29. Volatility diagrams for silica, silicon nitride, and silicon carbide and their application to high-temperature decomposition and oxidation10.1111/j.1151-2916.1990.tb06677.x ↗
30. Active-to-passive transition in the oxidation of silicon carbide and silicon nitride in air10.1111/j.1151-2916.1990.tb09793.x ↗
31. High temperature oxidation of silicon carbide based materials10.1007/BF00656732 ↗
32. High-strength porous silicon carbide ceramics by an oxidation-bonding technique10.1111/j.1151-2916.2002.tb00542.x ↗
33. Bubble formation in oxide scales on SiC10.1111/j.1151-2916.1984.tb19160.x ↗
34. Fabrication and properties of porous SiC-cordierite ceramics10.4028/www.scientific.net/AMR.803.230 ↗
35. Comparison of stress concentration versus minimum solid area based mechanical property–porosity relations10.1007/BF00367582 ↗
36. Evaluation and extension of physical property–porosity models based on minimum solid area10.1007/BF00355133 ↗
37. High-strength porous silicon carbide ceramics by an oxidation-bonding technique10.1111/j.1151-2916.2002.tb00542.x ↗