Dielectric and magnetic characterization of barium hexaferrite ceramics
Source abstract
Abstract
Abstract Barium hexaferrite (BHF) was obtained by high energy ball milling using milling power of 4:1 and 10:1 and milling times of 1 h and 10 h, hereinafter referred to as BHF411, BHF4110, BHF101 and BHF1010, respectively. After sintering at 1200 °C, the products were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The magnetic and dielectric properties were examined using a permeameter (8.4 kOe) and an impedance analyzer (300 MHz–1.1 GHz), respectively. The properties of coercivity and magnetic saturation of the BHF41 samples increased with milling time, but decreased over time for BHF101. At low frequencies, both BHF41 samples showed a slight variation in relative permittivity ( e ׳), but this property remained almost constant at high frequencies. On the other hand, the initial permittivity of BHF101 samples varied significantly at low frequencies, but was almost constant at high frequencies. All the BHF samples showed a decreasing behavior of tanδ at the highest frequencies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Multiferroics and related materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Hexagonal ferrites: a review of the synthesis, properties and applications of hexaferrite ceramics10.1016/j.pmatsci.2012.04.001 ↗
2. Magnetic Materials: Basic Concepts
3. Barium hexaferrite nanoparticles: synthesis and magnetic properties10.1016/j.mseb.2010.08.005 ↗
4. Synthesis and characterization of barium hexaferrite nanoparticles10.1016/j.jmatprotec.2006.03.015 ↗
5. Dielectric and magnetic properties of Mg–Ti substituted barium hexaferrite
6. Magnetic properties of barium ferrite synthesized using a microemulsion mediated process10.1016/0304-8853(92)90105-W ↗
7. One-step synthesis of barium hexaferrite nano-powders via microwave-assisted sol–gel auto-combustion10.1016/j.jeurceramsoc.2009.10.019 ↗
8. Effect of Fe/Ba mole ratios and surface active agents on the formation and magnetic properties of coprecipitated barium hexaferrite10.1016/j.jallcom.2006.11.080 ↗
9. The science and technology of mechanical alloying10.1016/S0921-5093(00)01465-9 ↗
10. Synthesis of nanostructured material by mechanical milling and study on structural property modifications in Ni0.5 Zn0.5Fe2O410.1016/j.ceramint.2009.10.024 ↗
11. Preparation of iron oxide nanoparticles by mechanical milling10.1016/j.mineng.2010.08.025 ↗
12. Fabrication and mechanical properties of ultrafine grained g-Ni–20Fe/Al2O3 composites10.1016/j.ceramint.2005.04.013 ↗
13. Preparation of zinc ferrite by high-energy ball milling and microstructure characterization by Rietveld׳s analysis10.1016/S0254-0584(03)00169-X ↗
14. Mossbauer and magnetic study of nanocrystalline Fe obtained by mechanical milling in argon
15. H. Kojima, E.P. Wohlfarth (Eds.), Ferromagnetic Materials (4th edn.). v. 3, 1982.
16. A study of the magnetic properties of hydrothermally synthesised Sr hexaferrite with Sm substitution10.1016/S0304-8853(01)00366-3 ↗
17. Correa. · 2005
18. Effect of annealing temperature on structural and magnetic properties of BaFe12O19 hexaferrite nanoparticles10.1016/j.ceramint.2013.12.068 ↗