Doping behavior of Br in Li4Ti5O12 anode materials and their electrochemical performance for Li-ion batteries
Source abstract
Abstract
Abstract Br-doped Li4Ti5O12-xBrx (“x” = 0, 0.1, 0.3, 0.5 and 0.7) anode materials were synthesized by a conventional solid-state reaction technique using precursors of Li2CO3, TiO2 and LiBr, and the doping behavior and related electrochemical properties of these materials were studied. In our investigation, quantitative instrumental analyses revealed that most of the Br ions are situated on the surfaces/interfaces of agglomerated particles rather than in the bulk lattice. Narrow conduction paths of electron and Li-ion were, thus, formed on their surfaces/interfaces. During charging/discharging process, the presence of these narrow surface electrical conduits increased the rate-capability of the LTOBr samples. The LTOBr0.5 sample showed the highest capacity of 125 mAh/g at 1C compared to 115 mAh/g for pure LTO. A highly Br-doped sample (LTOBr0.7), however, showed a slight reduction in capacity. This was explained with the formation of fine precipitations (Br-containing second phase) on the surfaces of the LTO particles due to high Br addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. Building better batteries10.1038/451652a ↗
3. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
4. Thermodynamic analysis on energy densities of batteries10.1039/c0ee00777c ↗
5. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
6. Lithium-ion rechargeable batteries with LiCoO2 and carbon electrodes: the LiCoO2/C system10.1016/0167-2738(94)90411-1 ↗
7. Lithium batteries and cathode materials10.1021/cr020731c ↗
8. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
9. Developments in nanostructured cathode materials for high‐performance lithium‐ion batteries10.1002/adma.200702242 ↗
10. Recent progress in cathode materials research for advanced lithium ion batteries10.1016/j.mser.2012.05.003 ↗
11. Novel lithium‐ion cathode materials based on layered manganese oxides10.1002/1521-4095(200107)13:12/13<943::AID-ADMA943>3.0.CO;2-J ↗
12. Electrochemical study of Li4Ti5O12 as negative electrode for Li-ion polymer rechargeable batteries10.1016/S0378-7753(99)00209-8 ↗
13. Chemical and electrochemical Li-insertion into the Li4Ti5O12 spinel10.1021/cm0488837 ↗
14. New inorganic spinel oxides for use as negative electrode materials in future lithium-ion batteries10.1016/S0378-7753(98)00217-1 ↗
15. Self-supported Li4Ti5O12–C nanotube arrays as high-rate and long-life anode materials for flexible Li-ion batteries10.1021/nl5004174 ↗
16. Hydrogenated Li4Ti5O12 nanowire arrays for high rate lithium ion batteries10.1002/adma.201203151 ↗
17. Li4Ti5O12 nanoparticles embedded in a mesoporous carbon matrix as a superior anode material for high rate lithium ion batteries10.1002/aenm.201100720 ↗
18. Electrical conductivity and charge compensation in Ta doped Li4Ti5O1210.1016/j.jpowsour.2008.02.019 ↗
19. Carbon-coated nano-sized Li4Ti5O12 nanoporous micro-sphere as anode material for high-rate lithium-ion batteries10.1039/c1ee01680f ↗
20. Electrochemical properties of doping lithium titanate compounds and their performance in lithium rechargeable batteries10.1016/j.jpowsour.2007.10.061 ↗
21. Preparation and cycling performance of Al3+ and F− co-substituted compounds Li4AlxTi5− xFyO12− y10.1016/j.electacta.2004.12.036 ↗
22. Br‐Doped Li4Ti5O12 and composite TiO2 anodes for Li‐ion batteries: synchrotron X‐ray and in situ neutron diffraction studies10.1002/adfm.201100846 ↗
23. Porous Li4Ti5O12 coated with N-doped carbon from ionic liquids for Li-ion batteries10.1002/adma.201003294 ↗
24. Carbon-encapsulated F-doped Li4Ti5O12 as a high rate anode material for Li+ batteries10.1021/nn404311x ↗
25. Theoretical study of cation doping effect on the electronic conductivity of Li4Ti5O1210.1002/pssb.200541404 ↗
26. Preparation and electrochemical properties of Ca-doped Li4Ti5O12 as anode materials in lithium-ion battery10.1016/j.electacta.2013.03.006 ↗
27. Nitridation Br-doped Li4Ti5O12 anode for high rate lithium ion batteries10.1016/j.jpowsour.2014.05.025 ↗
28. Preparation and characterization of novel spinel Li4Ti5O12-xBrx anode materials10.1016/j.electacta.2009.04.010 ↗
29. Subsurface space-charge dopant segregation to compensate surface excess charge in a perovskite oxide10.1002/anie.201605561 ↗
30. Polyol-mediated synthesis of Li4Ti5O12 nanoparticle and its electrochemical properties10.1016/j.elecom.2005.09.027 ↗
31. Enhanced high-rate performance of Li4Ti5O12 nanoparticles for rechargeable Li-ion batteries10.1149/1.3527983 ↗
32. Optimized Li4Ti5O12 nanoparticles by solvothermal route for Li-ion batteries10.1166/jnn.2011.4785 ↗
33. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
34. Kinetic study of parasitic reactions in lithium-ion batteries: a case study on LiNi 0.6Mn0.2Co0.2O210.1021/acsami.5b11800 ↗
35. Superior cycle performance and high reversible capacity of SnO2/graphene composite as an anode material for lithium-ion batteries10.1038/srep09055 ↗