journal article·2016-02

Effect of raw powder particle size on microstructure and light transmittance of α-alumina films deposited by granule spray in vacuum

Jong-Hwan Park, Dong-Soo Park, Byung-Dong Hahn, Jong-Jin Choi, Jungho Ryu, Si-Young Choi, Jongwoo Kim, Woon-Ha Yoon, Chan Park

Ceramics International· Volume 42· Issue 2
Publisher page

Abstract

Abstract The effect of primary particle size of the raw alumina powder on the microstructure and light transmittance of the 1 μm thick α-alumina film was investigated. Granules made from four kinds of alumina powders with different primary particle sizes were sprayed to deposit the alumina films on glass substrates at room temperature in a vacuum. Grains of the alumina film were mostly not much bigger than 10 nm for all the samples. Both the film surface roughness and the interface roughness between the alumina film and glass substrate of the samples increased as the primary particle sizes of the alumina powders increased. A small number of hair-like flaws were observed in the alumina films prepared from the coarse powders. The variation of light transmittance was explained in part by change of surface roughness, the interface roughness, and flaw size of the alumina film according to the alumina primary particle size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Glass properties and applications · Advanced ceramic materials synthesis · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Preparation and characterization of aluminum oxide films by plasma enhanced chemical vapor deposition10.1016/S0257-8972(96)03100-3 ↗
2. Chemical vapor deposition and properties of amorphous aluminum oxide films
3. Low-temperature magnetron sputter-deposition, hardness, and electrical resistivity of amorphous and crystalline alumina thin films10.1116/1.1286715 ↗
4. Optical and electrical properties of Al2O3 films grown by Aerosol deposition
5. Optically transparent dense α-Al2O3 thick films deposited on glass at room temperature10.1016/j.cap.2007.10.057 ↗
6. Aerosol deposition of ceramic thick films at room temperature: densification mechanism of ceramic layers10.1111/j.1551-2916.2006.01030.x ↗
7. Dense nanotructured hydroxyapatite coating on titanium by Aerosol deposition10.1111/j.1551-2916.2008.02876.x ↗
8. Factors affecting surface roughness of Al2O3 films deposited on Cu substrates by an aerosol deposition method
9. Powder requirements for aerosol deposition of alumina films10.1016/j.apt.2015.05.016 ↗
10. Controlling factors of film-thickness in improved Aerosol deposition method10.2109/jcersj2.117.868 ↗
11. Study of light scattering on a soda lime glass eroded by sandblasting10.1016/j.jeurceramsoc.2007.01.011 ↗
12. Effect of surface roughness on the optical properties of multilayer polymer films10.1016/S0169-4332(01)01044-3 ↗
13. Relation between surface roughness and specular reflectance at normal incidence10.1364/JOSA.51.000123 ↗
14. Effect of solid particle impact on light transmission of transparent ceramics: role of the microstructure10.1016/j.optmat.2014.06.025 ↗
15. An overview of the aerosol deposition method: process fundamentals and new trends in materials applications
16. Growth process of α-Al2O3 ceramic films on metal substrates fabricated at room temperature by aerosol deposition10.1111/j.1551-2916.2011.04493.x ↗
17. Effective optical properties of non-absorbing nanoporous thin films10.1016/j.tsf.2005.08.173 ↗
18. Influence of substrate surface roughness on light scattering of TiO2 optical thin films10.3788/col201311.s10303 ↗
19. On the transparency of nanostructured alumina: Rayleigh-Gans model for anisotropic spheres10.1364/OE.17.006899 ↗