Mechanical properties and microstructure of 2.5D (shallow straight-joint) quartz fibers-reinforced silica composites by silicasol-infiltration-sintering
Source abstract
Abstract
Abstract 2.5D (shallow straight-joint) quartz fibers-reinforced silica composites were successfully prepared by silicasol-infiltration-sintering method. The composites were sintered at 450 °C and the density of the composite was up to 1.70 g/cm 3 after 11 infiltration-sintering cycles. The characteristics of 2.5D (shallow straight-joint) structure were determined. Flexural strength and shear strength of the composites were investigated along the warp and weft directions. The undulation of warp yarns could reduce the mechanical properties of the composites along warp direction. The flexural and shear stress-deflection curves exhibited mostly nonlinear behavior. The failure was not catastrophic. Some fibers pull-out indicated that the composite exhibited a certain degree of toughness. Microstructural observations revealed that the interface strength between the fiber and the matrix was weak for the relatively low sintering temperature of 450 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A simple way to make tough ceramics10.1038/347455a0 ↗
2. Microstructural design of toughened ceramics10.1111/j.1151-2916.1991.tb06834.x ↗
3. Perspective on the development of high-toughness ceramics10.1111/j.1151-2916.1990.tb06493.x ↗
4. Fracture behaviour of 2d-weaved, silica-silica continuous fibre-reinforced, ceramic-matrix composites (cfccs)10.1016/j.engfracmech.2004.02.005 ↗
5. Elastic properties of silica-silica continuous fibre-reinforced, ceramic matrix composites10.1016/j.scriptamat.2004.01.029 ↗
6. Elevated-temperature fracture characterization of advanced fibrous ceramic thermal insulators10.1111/j.1151-2916.1994.tb04665.x ↗
7. Processing and properties of unidirectional SiO2f/SiO2 composites10.1016/j.ceramint.2005.12.017 ↗
8. High toughness, 3d textile, SiC/SiC composites by chemical vapor infiltration10.1016/S0921-5093(01)01303-X ↗
9. Tensile properties of a SiCf/SiC/composite10.1016/0921-5093(96)10381-6 ↗
10. Mechanical properties of 3d fiber reinforced C/SiC composites10.1016/S0921-5093(00)01533-1 ↗
11. High performance 3d textile hi-nicalon SiC/SiC composites by chemical vapor infiltration10.1016/S0272-8842(01)00002-5 ↗
12. Probabilistic-statistical approach to matrix damage and stress–strain behavior of 2-d woven SiC/SiC ceramic matrix composites10.1016/S0955-2219(98)00119-8 ↗
13. Stress-dependent matrix cracking in 2d woven sic-fiber reinforced melt-infiltrated sic matrix composites10.1016/j.compscitech.2003.10.022 ↗
14. Ultrasonic investigation of the time-dependent damage in a 2d SiC/SiC composite under static loading10.1016/S0955-2219(98)00125-3 ↗
15. Microstructure characterization and tensile behavior of 2.5d C/SiC composites fabricated by chemical vapor infiltration10.1016/j.scriptamat.2006.01.047 ↗
16. A new scheme and microstructural model for 3d full 5-directional braided composites10.1016/S1000-9361(09)60188-6 ↗
17. Damage and failure behaviour of a woven C/SiC material10.1023/A:1018699702470 ↗
18. Elastic moduli of a 2.5d Cf/SiC composite: experimental and theoretical estimates10.1016/S0266-3538(99)00180-3 ↗
19. Understanding the creep behavior of a 2.5d Cf-SiC composite. III. From mesoscale to nanoscale microstructural and morphological investigation towards creep mechanism10.1016/S0921-5093(01)01137-6 ↗
20. Understanding the creep behavior of a 2.5d Cf-SiC composite: II. Experimental specifications and macroscopic mechanical creep responses10.1016/S0921-5093(00)00922-9 ↗
21. Understanding the creep behavior of a 2.5d Cf-SiC composite-i. Morphology and microstructure of the as-received material10.1016/S0921-5093(99)00626-7 ↗
22. Flexural properties of 3d-SiO2/SiO2 composites10.4028/www.scientific.net/KEM.249.163 ↗
23. Studies on preparation and property of 2.5d SiO2f/SiO2 composites10.4028/www.scientific.net/AMR.79-82.1767 ↗