Foamed high porosity alumina for use as a bone tissue scaffold
Source abstract
Abstract
Abstract Porous alumina can be used as a synthetic bone scaffold in tissue engineering. Using a direct foaming method a foamed alumina was produced using in situ evolution of gases by calcining blends of ammonium sulphate and aluminium sulphate with varying ammonium mole fraction (AMF). The effect of foaming heating rate was observed by varying the foaming heating rate from 100 °C/h to 600 °C/h. The effect of sintering temperature was also observed by varying the sintering temperature from 1500 °C to 1600 °C. The resulting porous structure exhibited high mechanical strength with high levels of porosity and high average pore size. Foamed alumina with the optimal conditions was fabricated using 0.33 AMF with a foaming heating rate of 100 °C/h followed by sintering at 1600 °C. The porous alumina produced attained a high porosity value of 94.39%, an average pore size of 300 µm and the highest strength amongst all samples of 384.3 kPa. Interconnected porosity was observed using micro-CT.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced ceramic materials synthesis · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. ceramic for bone replacement: role of the pores and interconnections10.1023/A:1011256107282 ↗
2. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints10.1016/S0142-9612(02)00148-5 ↗
3. The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering10.1016/j.biomaterials.2009.09.063 ↗
4. Biodegradable polymer scaffolds for tissue engineering
5. W.M. Saltzman, Cell interactions with polymers, Principles of Tissue Engineering 2, 2000.10.1016/B978-012436630-5/50023-4 ↗
6. Ma · Fabrication of Biodegradable Polymer Foams for Cell Transplantation and Tissue Engineering Methods in Molecular Medicine · 1998 · 18 · 47
7. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
8. Characterisation of foamed alumina tissue scaffolds10.4028/www.scientific.net/JBBTE.4.21 ↗
9. Optimising bioactive glass scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.07.017 ↗
10. Bioceramics10.1111/j.1151-2916.1998.tb02540.x ↗
11. Effects of surfactants on the microstructure and some intrinsic properties of porous building ceramics fabricated by gelcasting10.1016/j.ceramint.2005.06.003 ↗
12. The role of surfactant structure on foam behaviour10.1016/j.colsurfa.2004.12.060 ↗
13. Processing of particle-stabilized wet foams into porous ceramics10.1111/j.1551-2916.2007.01907.x ↗
14. Macroporous ceramics from particle-stabilized wet foams10.1111/j.1551-2916.2006.01328.x ↗
15. Tailoring the microstructure of particle-stabilized wet foams10.1021/la0624844 ↗
16. Gonzenbach · Angew. Chem. Int. Ed. · 2006 · 45 · 352610.1002/anie.200503676 ↗