Effect of high energy ball milling on compressibility and sintering behavior of alumina nanoparticles
Source abstract
Abstract
Abstract The effect of high-energy ball milling on the textural evolution of alumina nanopowders (compaction response, sinter-ability, grain growth and the degree of agglomeration) during post sintering process is studied. The applied pressure required for the breakage of the agglomerates (Py) during milling was estimated and the key elements of compressibility (i.e. critical pressure (Pcr) and compressibility (b)) were calculated. Based on the results, the fracture point of the agglomerates decreased from 150 to 75 MPa with prolonged milling time from 3 to 60 min. Furthermore, the powders were formed by different shaping methods such as cold isostatic press (CIP) and uniaxial press (UP) to better illustrate the influence of green compact uniformity and powder deagglomeration on the densification behavior of nanopowders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Nanostructured materials for photocatalytic hydrogen production10.1016/j.cocis.2009.05.003 ↗
2. Nano-sized Ni particles on hollow alumina ball catalysts for hydrogen production10.1016/j.apcatb.2006.09.013 ↗
3. Reverse precipitation synthesis and characterization of CeO2 nanopowder10.1016/j.jallcom.2009.10.243 ↗
4. Nanotechnology, nanomedicine, and the development of new effective therapies for cancer10.1016/j.nano.2005.03.002 ↗
5. Nanostructures for photovoltaics10.1016/j.mser.2008.06.002 ↗
6. Inorganic nanomedicine. Part 210.1016/j.nano.2010.04.003 ↗
7. Method for the morphological characterization of powder raw materials for the manufacturing of ceramics10.1016/S0924-0136(03)00576-4 ↗
8. Sintering behavior of an ultrafine alumina powder shaped by pressure filtration and dry pressing10.1016/j.msea.2010.03.051 ↗
9. From powders to sintered pieces: forming, transformations and sintering of nanostructured ceramic oxides10.1016/S0032-5910(02)00183-3 ↗
10. Effect of nanopowder deaglomeration on the densities of nanocrystalline ceramic green bodies and their sintering behavior10.1016/S0965-9773(99)00348-7 ↗
11. Powder preparation and compaction behaviour of fine-grained Y-TZP10.1007/BF00575369 ↗
12. Processing and properties of nanophase ceramics
13. Porous alumina ceramics prepared by the hydrolysis-assisted solidification method10.1111/j.1551-2916.2010.04258.x ↗
14. Effect of green density on subsequent densification and grain growth of nanophase SnO2 powder during isothermal sintering10.1016/S0965-9773(97)00195-5 ↗
15. Characterizing powders for dry pressing, sintering
16. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
17. Sintering behavior of nano alumina powder shaped by pressure filtration10.1016/j.ceramint.2010.07.027 ↗
18. Mechanical properties of nanostructured materials10.1016/S0921-5093(00)01437-4 ↗
19. Suppression of grain growth in sub-micrometer alumina via two-step sintering method10.1016/j.jeurceramsoc.2008.08.027 ↗
20. The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina10.1016/0955-2219(96)00044-1 ↗
21. Characterizing powders for dry pressing, sintering
22. Simultaneous synthesis and single-step sintering of lead magnesium niobate ceramic using mixed nanopowders10.1016/j.ceramint.2008.05.010 ↗
23. Sintering behavior of nanocrystalline zirconia doped with alumina prepared by chemical vapor synthesis10.1111/j.1151-2916.2000.tb01481.x ↗
24. Densification and grain growth of Al2O3 nanoceramics during pressureless sintering10.1111/j.1551-2916.2005.00654.x ↗
25. Processing of high-density submicrometer Al2O3 for new applications10.1111/j.1151-2916.2003.tb03339.x ↗