journal article·2014-08

Investigation of yttria-doped alumina nanocomposites reinforced by multi-walled carbon nanotubes

Iftikhar Ahmad, Mohammad Islam, Abdulhakim A. Almajid, Bahareh Yazdani, Yanqiu Zhu

Ceramics International· Volume 40· Issue 7
Publisher page

Abstract

Nanocomposites of Y2O3 doped Al2O3 reinforced with 2 wt% MWCNTs were fabricated by hot-pressing. The influence of a small Y2O3 addition (300 ppm) on the microstructure and mechanical properties of CNT-reinforced Al2O3 was investigated. The resulting Y2O3 doped Al2O3-CNT nanocomposites showed near theoretical densities (499%) with an astounding 5 times finer grain size and substantial improvements in the fracture toughness (40%), flexural strength (20%) and hardness (18%) than pure Al2O3, prepared under identical experimental conditions. The Y2O3 addition improved the density of the matrix, eliminated the residual flaws and formed YAG (yttrium–aluminium–garnet) particles at the grain boundaries in the nanocomposites. The submicron YAG particles, together with the CNTs, promoted the Al2O3 matrix to form finegrained microstructures and altered the fracture mode, thus leading to higher toughness and other mechanical properties. The improved mechanical properties allows for the Y2O3 doped Al2O3-CNT nanocomposites to be used for applications in load bearing structures. & 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. New design concept of structural ceramics–ceramics nanocomposites10.2109/jcersj.99.974 ↗
2. Fracture toughness enhancement for alumina system: a review10.1111/j.1744-7402.2008.02224.x ↗
3. Microstructural development and mechanical properties of self-reinforced alumina with CAS addition10.1016/S0955-2219(00)00245-4 ↗
4. Potential application of ceramics matrix composites to aeroengine components10.1016/S1359-835X(98)00139-0 ↗
5. The toughness of alumina with iron: effects of iron distribution on fracture toughness10.1016/S0955-2219(96)00099-4 ↗
6. Carbon nanofiber-reinforced alumina nanocomposite: fabrication and mechanical properties10.1016/j.msea.2006.08.009 ↗
7. Multifunctional composites of ceramics and single-walled carbon nanotubes10.1002/adma.200802270 ↗
8. Preparation and microstructure of multi-walled carbon nanotubes toughened Al2O3 composite10.1111/j.1551-2916.2005.00774.x ↗
9. Single-walled carbon nanotubes as attractive toughing agent in alumina based nanocomposites10.1038/nmat793 ↗
10. Multi-walled carbon nanotubes reinforced Al2O3 nanocomposites: mechanical properties and interfacial investigations10.1016/j.compscitech.2010.03.007 ↗
11. The production of advanced fine-grained alumina by carbon nanotubes addition10.1016/j.jeurceramsoc.2011.07.011 ↗
12. Carbon nanotube toughened aluminium oxide nanocomposites10.1016/j.jeurceramsoc.2009.09.032 ↗
13. Wear resistance properties of multi-walled carbon nanotubes reinforced Al2O3 nanocomposite10.1016/j.wear.2010.03.009 ↗
14. Electrically conductive alumina–carbon nanotubes prepared by spark plasma sintering10.1016/j.jeurceramsoc.2009.05.045 ↗
15. Dramatic effect of a small amount of MgO addition on the sintering of Al2O3–5vol% SiC nanocomposite10.1016/S0167-577X(97)00121-3 ↗
16. Effects of additives on microstructure and properties of alumina–silicon carbide nanocomposites10.1111/j.1151-2916.1999.tb02286.x ↗
17. Effect of rare-earth dopants on mechanical properties of alumina10.1111/j.1551-2916.2004.00289.x ↗
18. Effect of yttrium and lanthanum on the final-stage sintering behavior of ultrahigh-purity alumina10.1111/j.1151-2916.1997.tb03084.x ↗
19. Grain boundaries in high temperature deformation of yttria and magnesia co-doped alumina10.1051/jphyscol:19901153 ↗
20. The Influence of yttrium on the sintering of Al2O310.1016/0022-5088(80)90279-9 ↗
21. Creep and creep fracture in hot-pressed alumina10.1111/j.1151-2916.1991.tb04322.x ↗
22. Grain boundary behavior in superplastic Mg-doped alumina with yttria co-doping10.1016/0956-7151(94)90071-X ↗
23. Fracture toughness of alumina–zirconia composites10.1016/j.ceramint.2005.02.012 ↗
24. Liquid phase sintering of Al2O3/SiC10.1016/S0955-2219(98)00252-0 ↗
25. Nanotubes from carbon10.1021/cr970102g ↗
26. Ultrasonic through-transmission method of evaluating the modulus of elasticity of Al2O3–ZrO2 composite10.1023/A:1018648319192 ↗
27. A critical evaluation of indentation technique for measuring fracture toughness: I, direct crack method10.1111/j.1151-2916.1981.tb10320.x ↗
28. Multiscale aspects of the influence of yttrium on microstructure, sintering and creep of alumina10.1016/S0955-2219(01)00471-X ↗
29. Diffusion models for hot pressing with surface energy and pressure effects as driving forces10.1063/1.1658543 ↗
30. Grain boundary migration in ceramics10.1023/A:1008656302007 ↗
31. Effect of dopants on densification, microstructure and mechanical properties of alumina–silicon nanocomposites ceramics prepared by pressureless sintering10.1016/j.jeurceramsoc.2003.10.024 ↗
32. Dopant distribution in nominally yttrium–doped sapphire10.1111/j.1151-2916.1986.tb04838.x ↗
33. Numerical simulation of Zener pinning with growing second-phase particles10.1111/j.1151-2916.1998.tb02370.x ↗
34. Microstructure and physicomechanical properties of pressure-less sintered multi-walled carbon nanotube/alumina nanocomposites10.1016/j.ceramint.2011.07.023 ↗
35. Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructures10.1016/j.jeurceramsoc.2006.09.002 ↗
36. Characterization of 2-dimensional crack propagation behaviour simulation and analysis10.1007/BF00037085 ↗
37. Griffith · Philos. Trans. R. Soc. Lond. · 1920 · 221 · 16310.1098/rsta.1921.0006 ↗
38. Role of grain size in the strength and R-curve performance of alumina10.1111/j.1151-2916.1990.tb07607.x ↗
39. Yttrium doping effect on oxygen grain boundary diffusion in α-Al2O310.1016/j.actamat.2007.08.016 ↗
40. Fracture-mode change in alumina-silicon carbide composites doped with rare–earth impurities10.1111/j.1151-2916.2003.tb03556.x ↗
41. Callister · 2000
42. Schaffer · 1995
43. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗