Brazing of Al2O3 to Ti–6Al–4V alloy with in situ synthesized TiB-whisker-reinforced active brazing alloy
Source abstract
Abstract
Abstract 65.9Cu–24.4Ti–9.7TiB 2 (wt.%) composite filler was used to join Al 2 O 3 and Ti–6Al–4V alloy. 30 vol.% TiB whiskers were in situ synthesized as reinforcements in joints. Brazing temperature was 890 °C, 910 °C, 930 °C, 950 °C and 970 °C, and the holding time was 0, 5, 10, 20, and 30 min. The microstructure and mechanical properties of brazed joints were analyzed by scanning electron microscope equipped with energy dispersive spectrometer, shear test and nano-indentation test. Results show that reaction layer Ti 4 (Cu,Al) 2 O forms at Al 2 O 3 /brazing alloy interface. The reaction between TiB 2 powders and Ti atoms in brazing alloy brings on in situ synthesizing TiB whiskers in (Ti,Al) 2 Cu and AlCu 2 Ti intermetallics. Formation of TiB whiskers minimizes the mismatch of thermal expansion coefficient between Al 2 O 3 and brazing alloy, and makes the ductile–rigid–ductile multiple layer present in joints, which reduces residual stress of joints. The maximum shear strength of joints can reach 143.3 MPa when the brazing temperature is 930 °C, and holding time is 10 min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Synthesis and properties of copper conductive adhesives modified by SiO2 nanoparticles10.1016/j.ijadhadh.2006.03.006 ↗
2. Alumina ceramics based on seeded boehmite and electrophoretic deposition10.1016/S0272-8842(02)00070-6 ↗
3. Joining of engineering ceramics10.1179/174328009X461078 ↗
4. Effects of different whiskers on the reinforcement of dental resin composites10.1016/S0109-5641(02)00078-7 ↗
5. Joining of Cf/SiC composite to Ti alloy using composite filler materials10.1179/174328408X378889 ↗
6. Brazing of silicon nitride ceramic composite to steel using SiC-particle-reinforced active brazing alloy10.1016/j.ceramint.2006.03.010 ↗
7. Identification of the matrix elastoplastic properties in reinforced active brazing alloys10.1016/j.compositesa.2008.03.007 ↗
8. Al2O3/Al2O3 joint brazed with Al2O3-particulate-contained composite Ag–Cu–Ti filler material
9. Joints of Cf/SiC composite to Ti-alloy with in-situ synthesized TiCx improved brazing layers10.2320/matertrans.47.1261 ↗
10. Brazed joints of Cf-SiC composite to Ti alloy using Ag–Cu–Ti–(Ti+C) mixed powder as interlayer10.1179/174329006X113454 ↗
11. Microstructure and mechanical performance of brazed joints of Cf/SiC composite and Ti alloy using Ag–Cu–Ti–W10.1179/174329306X113235 ↗
12. Metal–ceramic composites via in-situ methods10.1016/S0924-0136(96)00020-9 ↗
13. Review on fabrication methods of in situ metal matrix composites
14. A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions10.1007/s10853-007-1827-z ↗
15. Improvements of the Si3N4 brazed joints with intermetallics10.1016/j.msea.2005.09.096 ↗
16. Effect of brazing parameters on microstructure and mechanical properties of titanium joints10.1016/j.jmatprotec.2009.01.006 ↗
17. Interfacial microstructure and strength of partial transient liquid-phase bonding of silicon nitride with Ti/Ni multi-interlayer10.1016/j.msea.2004.04.012 ↗
18. Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti–6Al–4V joint brazed with AgCu/Ni interlayer10.1016/j.msea.2009.10.050 ↗
19. In situ synthesis of TiB reinforcements in the joints of Al2O3/TC4 during brazing10.1016/j.msea.2011.01.035 ↗
20. Reactive brazing study of a silicon nitride to metal joining10.1016/S0955-2219(97)00059-9 ↗
21. Synthesis of substituted M- and W-type barium ferrite nanostructured powders by stearic acid gel method10.1016/0925-8388(95)02160-4 ↗
22. Mapping of the residual stress distribution in a brazed zirconia–iron joint10.1016/0921-5093(95)10056-3 ↗
23. An analytical study of the influence of thermal residual stress on the elastic and yied behavious of short fiber-reinforced metal matrix composites10.1016/S0921-5093(98)00509-7 ↗