journal article·2019-10Open access

Effects of dopant rate and calcination parameters on photoluminescence emission of Y2O3:Eu3+ phosphors: A statistical approach

Fatma Unal, Faruk Kaya, Kursat Kazmanli

Ceramics International· Volume 45· Issue 14

Abstract

Abstract In this study, Y2O3:Eu3+ phosphorescent powders with different dopant rates were synthesized by sol-gel method. Statistical experimental design methods were used to investigate the effects of calcination temperature (800, 900 and 1200 °C), time (5 and 7 h) and dopant rate (5 and 7% at.) on the colour of the photoluminescence emission. The XRD results showed that as-prepared powders were amorphous. After calcination, the crystal structures became cubic bixbyite-type. XRD and Raman spectroscopy results confirmed the existence of Eu3+ in the Y2O3 crystal. Crystallite sizes and lattice parameters of the powders were calculated by using Williamson-Hall and Cohen-Wagner methods, respectively. Photoluminescence emission spectra of the samples were measured at room temperature by using an optical emission spectroscope with 380 nm monochromatic excitation source and the emission spectra were transformed to CIELab colour space coordinates. The emission spectra exhibited a strong characteristic peak at 611 nm and a smaller peak at 614 nm. Depending on the dopant rate and the calcination parameters, other smaller peaks appeared at 587, 592, 606, 623 and 631 nm. The CIELab colour space transformation results showed that the powders possessed orange-red emission. The dopant rate and the calcination conditions slightly changed the emission colour. According to the statistical analysis, the dopant rate had the strongest effect on a* colour space value (redness) whereas all parameters had equally significant effect on b* colour space value (yellowness). The ANOVA analysis revealed that the interaction between the temperature and the dopant rate was also statistically significant with the confidence level of 95%. This interaction was attributed to the relation between lattice strain and calcination temperature, which confirms the strong symmetry dependence of the electron-dipole (ED) transitions of the Y2O3:Eu3+ phosphors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Glass properties and applications · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ultraviolet and blue cathodoluminescence from cubic Y2O3 and Y2O3:Eu3+ generated in a transmission electron microscope10.1039/C6TC01750A ↗
2. Synthesis of well-dispersed Y2O3:Eu nanocrystals and self-assembled nanodisks using a simple non-hydrolytic route10.1002/adma.200500503 ↗
3. Structural and optical properties of europium doped yttrium oxide nanoparticles for phosphor applications10.1016/j.jallcom.2010.02.083 ↗
4. Microwave synthesis of Y2O3:Eu3+ nanophosphors: a study on the influence of dopant concentration and calcination temperature on structural and photoluminescence properties10.1016/j.jlumin.2015.08.059 ↗
5. Optical properties of highly crystalline Y2O3:Er,Yb nanoparticles prepared by laser ablation in water10.1088/2053-1591/1/3/035043 ↗
6. Preparation, characterization, and strong upconversion of monodisperse Y2O3:Er3+,Yb3+ microspheres10.1016/j.optmat.2008.06.011 ↗
7. Emission properties of Ln (Eu, Tb, Dy, Er)-doped Y2O3 nanoparticles synthesized by surfactant-assembly and their applications in visible color-tuning10.1016/j.jphotochem.2014.11.017 ↗
8. Fabrication and characterization of Bi-doped Y2O3 phosphor thin films by RF magnetron sputtering10.1016/j.tsf.2016.01.018 ↗
9. Upconversion properties of Y2O3:Er films prepared by sol-gel method10.1016/S1002-0721(08)60261-6 ↗
10. Annealing effects on structural and luminescence properties of red Eu3+-doped Y2O3 nanophosphors prepared by sol–gel method10.1016/j.jlumin.2013.07.037 ↗
11. Preparation of nonaggregated Y2O3 :Eu phosphor particles by spray pyrolysis method10.1557/JMR.1999.0349 ↗
12. Photoluminescence characteristics of spherical Y2O3:Eu Phosphors by aerosol pyrolysis10.1149/1.1406496 ↗
13. Luminescent properties of Eu-doped Y2O3 nanophosphors10.1002/pssa.200406825 ↗
14. Chemical vapor synthesis and luminescence properties of nanocrystalline cubic Y2O3:Eu10.1063/1.371177 ↗
15. Y2O3:Eu3+ microspheres: solvothermal synthesis and luminescence properties10.1021/cg060717j ↗
16. Luminescent materials10.1016/S1359-0286(97)80071-X ↗
17. Synthesis and characterization of ultra-fine Y2O3:Eu3+ nanophosphors for luminescent security ink applications10.1088/0957-4484/21/5/055607 ↗
18. Sol-gel processing of nanostructured inorganic scintillating materials10.1155/2007/36392 ↗
19. Effects of composition and transparency on photo and radioluminescence of Y2O3:Eu complexes10.1080/10420150.2011.569720 ↗
20. Bio-prototyping of europium-yttria based rods for radiation dosimetry10.1016/j.matchemphys.2017.07.063 ↗
21. Photoluminescence characteristics of macroporous Eu-doped yttrium oxide particles prepared by spray pyrolysis10.1143/JJAP.48.032001 ↗
22. Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors10.1021/cm062887p ↗
23. Structural and photoluminescence studies of Eu3+ doped cubic Y2O3 nanophosphors10.1016/j.jlumin.2013.07.074 ↗
24. Structural and luminescent characteristics of pulsed laser deposited Eu3+-doped Y2O3 thin films10.1080/14786435.2012.657712 ↗
25. Synthesis of strong red emitting Y2O3:Eu3+ phosphor by potential chemical routes: comparative investigations on the structural evolutions, photometric properties and Judd–Ofelt analysis10.1039/C5RA13247A ↗
26. CIE · 2006
27. X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
28. Determination of dislocation density and stacking fault probability from X-ray powder pattern peak profiles10.1007/BF03038366 ↗
29. Microstructure, stress and texture in sputter deposited TiN thin films: effect of substrate bias10.4028/www.scientific.net/AMR.996.855 ↗
30. Bio-inspired synthesis of Y2O3:Eu3+ red nanophosphor for eco-friendly photocatalysis10.1016/j.saa.2015.01.055 ↗
31. Growth and microstructural analysis of nanosized Y2O3 doped with rare-earths10.1016/S0254-0584(00)00325-4 ↗
32. Effect of Eu ion incorporation on the emission behavior of Y2O3 nanophosphors: a detailed study of structural and optical properties10.1016/j.optmat.2016.07.026 ↗
33. Structure and optical properties of rare earth doped Y2O3 waveguide films derived by sol-gel process10.1016/j.tsf.2003.12.059 ↗
34. Effect of calcination temperature on structural, photoluminescence, and thermoluminescence properties of Y2O3:Eu3+ nanophosphor10.1021/jp309684b ↗
35. Crystal structure and photoluminescence properties of Eu-doped Y2O3 nanoparticles prepared by mechanical milling10.2320/matertrans.MA201556 ↗
36. Influence of mechanochemical processing to luminescence properties in Y2O3 powder10.1016/j.jallcom.2007.02.083 ↗
37. Preparation of Y2O3:Eu3+ nanopowders via polymer complex solution method and luminescence properties of the sintered ceramics10.1016/j.ceramint.2010.09.040 ↗
38. Red emitting Y2O3:Eu3+ nanophosphors with >80% down conversion efficiency10.1039/C3TC31939C ↗
39. Size dependent luminescence of nanocrystalline Y2O3:Eu and connection to temperature stimulus10.1016/j.jallcom.2010.12.110 ↗