Crystallization behavior and sintering of cordierite synthesized by an aqueous sol–gel route

Abstract The purpose of the research was to investigate crystallization behavior and sintering of cordierite synthesized by a low-price aqueous sol–gel route starting from silicic acid and magnesium and aluminum salts. Viscous sintering of the gel occurred in the temperature range of 800–850 °C, followed by μ-cordierite crystallization at about 900 °C, which proves the homogeneity of the gel. Decreasing of μ-cordierite crystallinity in a wide temperature range prior to commencing of α-cordierite crystallization at about 1200 °C indicates reconstructive type of μ- → α-cordierite transformation. The transformation was fully completed at 1350 °C. The value of the Avrami parameter indicates that μ-cordierite crystallization was controlled by surface or interface nucleation, which implies that viscous sintering occurred in the primary gel particles, which leads to shrinkage, and thereafter nucleation occurred on the surface or interface of the particles. The overall activation energy of μ-cordierite crystallization was 382.0 kJ/mol. The sinterability of the powder obtained by calcination at 1300 °C, where well-crystallized α-cordierite was formed, was better than that of the powder obtained by calcination at 850 °C, where the most intensive shrinkage occurred before the onset of crystallization of μ-cordierite.