journal article·2012-05

Synthesis of WO3 thin films by surfactant mediated spray pyrolysis

L.M. Bertus, A. Duta

Ceramics International· Volume 38· Issue 4
Publisher page

Abstract

Abstract WO3 thin films were prepared by surfactant mediated spray pyrolysis deposition on fluorine-doped tin oxide (FTO) conductive glass using hexadecylthymethylammonium bromide (HTAB) as structure-directing agent. The crystalline structure, topography, electrical conductivity and optical properties were investigated as function of cationic surfactant concentration. High transparency and conductivity were obtained for the sample which contained the lowest amount of surfactant (50 ppm) in the spraying solution. Significant changes in the morphology were observed with increasing HTAB addition level; samples lost their homogeneity and porosity, while the layer roughness increased. The surfactant by-products resulted after annealing were investigated based on FTIR analysis and a decomposition scheme was proposed. The modified surface composition and morphology influenced the hydrophilic character of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Granqvist · 1995
2. Sensitivity properties of a novel NO2 gas sensor based on mesoporous WO3 thin film10.1016/S0925-4005(03)00528-8 ↗
3. Effect of annealing on structural and optical properties of WO3 thin films prepared by electron-beam coating10.1016/j.physb.2006.09.010 ↗
4. Influence of annealing on electrochromic performance of template assisted, electrochemically grown, nanostructured assembly of tungsten oxide10.1016/j.actamat.2006.05.044 ↗
5. Optical and electrochromic properties of oxygen sputtered tungsten oxide (WO3) thin films10.1016/j.solmat.2006.09.005 ↗
6. Optical and electrochromic properties of RF reactively sputtered WO3 films10.1016/j.ssi.2003.08.030 ↗
7. Influence of the annealing and operating temperatures on the gas-sensing properties of RF sputtered WO3 thin-film sensors10.1016/j.snb.2004.06.009 ↗
8. Annealing effect on the formation of nanocrystals in thermally evaporated tungsten oxide thin films10.1016/j.mseb.2003.10.080 ↗
9. Efficiency of Li doping on electrochromic WO3 thin films10.1016/S0040-6090(00)01424-3 ↗
10. Study of the surface roughness of CVD-tungsten oxide thin films10.1016/S0169-4332(03)00575-0 ↗
11. Electrochromic properties of atmospheric CVD MoO3 and MoO3–WO3 films and their application in electrochromic devices10.1016/j.mseb.2004.12.084 ↗
12. Structural, electrochromic and FT-IR studies on electrodeposited tungsten trioxide films10.1016/S1567-1739(02)00196-7 ↗
13. Electrochromism and reversible changes in the position of fundamental absorption edge in cathodically deposited amorphous WO310.1016/j.electacta.2004.01.020 ↗
14. Spin coated versus dip coated electrochromic tungsten oxide films: structure, morphology, optical and electrochemical properties10.1016/j.electacta.2005.06.027 ↗
15. Sol–gel electrochromic WO3 coatings on glass10.1016/j.matlet.2003.07.043 ↗
16. Preparation and characterization of spray deposited n-type WO3 thin films for electrochromic devices10.1016/j.materresbull.2004.04.023 ↗
17. Titanium doping effects in electrochromic pulsed spray pyrolysed WO3 thin films10.1016/j.ssi.2008.02.052 ↗
18. The influence of defects on the conduction in photoelectrodes used for water splitting
19. Influence of tantalum dopant ions (Ta5+) on the efficiency of the tungsten trioxide photoelectrode10.1002/pssa.200778858 ↗
20. Photoelectrochemical and physical properties of tungsten trioxide films obtained by aerosol pyrolysis10.1016/j.materresbull.2007.06.035 ↗
21. Structural and electrochemical studies of WO3 films deposited by pulsed spray pyrolysis10.1016/j.solmat.2006.03.033 ↗
22. Preparation and characterization of pyrolytic spray deposited electrochromic tungsten trioxide films10.1016/S0040-6090(99)00682-3 ↗
23. Tungsten trioxide thin films prepared by electrostatic spray deposition technique10.1016/j.tsf.2007.01.014 ↗
24. Tailoring WO3 thin layers using spray pyrolysis technique10.1002/pssc.200779410 ↗
25. Preparation of WO3 nanoparticles using cetyl trimethyl ammonium bromide supermolecular template10.3844/ajassp.2009.1424.1428 ↗
26. Electro-optical response of tungsten oxide thin film nanostructures processed by a template assisted electrodeposition route10.1016/j.actamat.2007.07.056 ↗
27. Effect of copolymer and additive concentrations on the behaviors of mesoporous tungsten oxide10.1016/j.jallcom.2005.01.004 ↗
28. Hydrolysis reaction on the characterization of wormhole-like mesoporous tungsten oxide10.1016/j.jallcom.2006.08.017 ↗
29. XRD studies of thermally stable mesoporous tungsten oxide synthesised by a templated sol–gel process from tungstic acid precursor10.1016/j.micromeso.2009.01.014 ↗
30. Fabrication and characterization of hexagonal mesoporous silica monolith via post-synthesized hydrothermal process10.1007/s10971-006-7745-8 ↗
31. Synthesis of WO3 in nanoscale with the usage of sucrose ester microemulsion and CTAB micelle solution10.1016/j.matlet.2006.10.014 ↗
32. Micellization of CTAB in the presence of silicate anions and the exchange between bromide and silicate at the micelle surface10.1016/j.jcis.2006.02.040 ↗
33. Interactions of different counterions with cationic and anionic surfactants10.1016/j.jcis.2010.03.043 ↗
34. Self-assembly of cetyltrimethylammonium bromide in ethanol–water mixtures10.1007/s11458-006-0069-y ↗
35. An FTIR investigation of hexadecyltrimethylammonium intercalation into rectorite10.1016/j.saa.2008.05.015 ↗
36. Infrared and Raman study of WO3 tungsten trioxides and WO3, xH2O tungsten trioxide hydrates10.1016/0022-4596(87)90359-8 ↗
37. Electrochromic properties of atmospheric CVD MoO3 and MoO3-WO3 films and their application in electrochromic devices10.1016/j.mseb.2004.12.084 ↗
38. Structure of hydrated tungsten peroxides [WO2(O2)H2O]·nH2O10.1021/cm980045n ↗
39. Electrodeposited tungsten oxide films: annealing effects on structure and electrochromic performance10.1016/j.tsf.2004.04.056 ↗
40. Nyquist · 2001
41. Microstructural and electrochromic properties of tungsten oxide thin films produced by surfactant mediated electrodeposition10.1016/j.apsusc.2007.09.035 ↗
42. Yacobi · 2003
43. Photochromism in composite and hybrid materials based on transition-metal oxides and polyoxometalates10.1016/j.pmatsci.2005.12.001 ↗
44. Optical properties and surface morphology of evaporated (WO3)(1−x)–(Fe2O3)(x) thin films10.1016/j.tsf.2005.02.019 ↗
45. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
46. Refractive index, optical bandgap and oscillator parameters of organic films deposited by vacuum evaporation technique10.1016/j.vacuum.2008.11.010 ↗
47. Studies on the correlation between electrochromic colouration and the relative density of tungsten trioxide (WO3−x) thin films prepared by electron beam evaporation10.1088/0022-3727/42/9/095301 ↗
48. Optical characterization and thickness estimation of Al3+ ion doped ZnO nano-films from transmittance spectra
49. Optical scattering characteristic of annealed niobium oxide films10.1016/j.tsf.2005.04.036 ↗
50. Optical inhomogeneity of ZnS films deposited by thermal evaporation10.1016/j.apsusc.2008.04.023 ↗
51. Growth, structural, electrical and optical properties of the thermally evaporated tungsten trioxide (WO3) thin films10.1016/j.matchemphys.2008.09.071 ↗
52. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
53. Combined AFM, XPS, and contact angle studies on treated indium–tin-oxide films for organic light-emitting devices10.1016/j.matlet.2006.12.063 ↗
54. Surface OH group governing adsorption properties of metal oxide10.1016/S0040-6090(98)01152-3 ↗
55. Surface properties of copper based cermet material10.1016/j.mseb.2008.06.020 ↗