Nanofiber-structured SSC–GDC composite cathodes for a LSGM electrolyte based IT-SOFCs
Source abstract
Abstract
Abstract Nanofiber-structured Sm 0.5 Sr 0.5 CoO 3−δ –Gd 0.2 Ce 0.8 O 1.9 (SSC–GDC) composite cathodes prepared by infiltration of Gd 0.2 Ce 0.8 O 1.9 (GDC) precursor solution into a porous Sm 0.5 Sr 0.5 CoO 3−δ (SSC) nanofiber scaffold are investigated. The SSC–GDC composite cathode with the optimum infiltration load of GDC achieves interfacial polarization resistances of 1.609, 0.595, 0.209, 0.081 and 0.038 Ω cm 2 at 600, 650, 700, 750 and 800 °C, respectively. These polarization resistances are lower than those reported for comparable materials. Stable performance of the cathode is confirmed by testing at a constant current of 0.2 A/cm 2 for up to 100 h. Furthermore, the peak power density of a cell using the nanofiber-structured SSC–GDC cathode in combination with a 650-μm-thick La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3−δ electrolyte is found to be 0.134 W/cm 2 at 800 °C. All of these results make of the nanofiber-structured SSC−GDC composite cathodes a potential high-performance component for use in intermediate temperature solid oxide fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Doped LaGaO3 perovskite type oxide as a new oxide ionic conductor10.1021/ja00088a016 ↗
2. An intermediate temperature solid oxide fuel cell utilizing superior oxide ion conducting electrolyte, doubly doped LaGaO3 perovskite10.1007/BF02375883 ↗
3. Superior perovskite oxide-ion conductor; strontium- and magnesium-doped LaGaO3: I, phase relationships and electrical properties
4. Superior perovskite oxide-ion conductor; strontium- and magnesium-doped LaGaO3: III, performance tests of single ceramic fuel cells
5. Microstructure and ionic conductivity of Sr- and Mg-doped LaGaO310.1007/s10853-006-6309-1 ↗
6. Intermediate temperature solid oxide fuel cells using a new LaGaO3 based oxide ion conductor10.1149/1.1838783 ↗
7. Dimethyl ether fueled intermediate temperature SOFC using LaGaO3-based perovskite electrolytes10.1149/1.1489135 ↗
8. Electrochemical properties of the Sm0.5Sr0.5CoO3–La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5)/LSGMC5 interface modified by an LSGMC5 interlayer synthesized using the citrate method10.1016/j.jpowsour.2006.06.027 ↗
9. High performance Sm0.5Sr0.5CoO3–La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 composite cathodes10.1016/j.elecom.2006.03.034 ↗
10. A micro-nano porous oxide hybrid for efficient oxygen reduction in reduced-temperature solid oxide fuel cells10.1038/srep00462 ↗
11. A solid oxide cell yielding high power density below 600°C
12. Impregnated nickel anodes for reduced-temperature solid oxide fuel cells based on thin electrolytes of doped LaGaO310.1016/j.jpowsour.2012.08.019 ↗
13. Sulfur poisoning of SOFC cathodes10.1149/1.3090169 ↗
14. Ln1−xSrxCoO3 (Ln=Sm, Dy) for the electrode of solid oxide fuel cells10.1016/S0167-2738(97)00360-3 ↗
15. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges10.1016/j.ijhydene.2011.09.067 ↗
16. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
17. An intermediate-temperature solid oxide fuel cell with electrospun nanofiber cathode10.1039/c2ee02619h ↗
18. One dimensional La0.8Sr0.2Co0.2Fe0.8O3−δ/Ce0.8Gd0.2O1.9 nanocomposite cathodes for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.07.013 ↗
19. Electrospinning La0.8Sr0.2Co0.2Fe0.8O3−δ tubes impregnated with Ce0.8Gd0.2O1.9 nanoparticles for an intermediate temperature solid oxide fuel cell cathode10.1016/j.ijhydene.2013.03.111 ↗
20. Performance of Gd0.2Ce0.8O1.9 infiltrated La0.2Sr0.8TiO3 nanofiber scaffolds as anodes for solid oxide fuel cells10.1016/j.jpowsour.2014.04.109 ↗
21. One-dimensional Sr0.7Y0.3CoO2.65−δ nanofibers as cathode material for IT-SOFCs10.1016/j.ijhydene.2014.02.030 ↗
22. Preparation and performance study of one-dimensional nanofiber-based Sm0.5Sr0.5CoO3−δ–Gd0.2Ce0.8O1.9 composite cathodes for intermediate temperature solid oxide fuel cells10.1016/S1452-3981(23)12912-9 ↗
23. Structure and electrochemical properties of Sm0.5Sr0.5Co1−xFexO3−δ cathodes for solid oxide fuel cells10.1016/j.ssi.2006.01.038 ↗
24. On the interaction of SSC and LSGM in composite SOFC electrodes10.1016/j.jpowsour.2013.04.046 ↗