journal article·2018-07

Wetting and low temperature bonding of zirconia metallized with Sn0.3Ag0.7Cu-Ti alloys

H. Bian, W. Fu, Y.Z. Lei, X.G. Song, D. Liu, J. Cao, J.C. Feng

Ceramics International· Volume 44· Issue 10
Publisher page

Abstract

Abstract The wettability of zirconia with Sn0.3Ag0.7Cu-Ti (SAC-Ti) alloys was investigated via the sessile drop method with the increase of temperature. Zirconia, pre-metallized with SAC-Ti metal powder at 900 °C, was brazed to copper using an SAC solder paste at the low temperature of 250 °C. The active element Ti reduced the contact angle as the temperature increased. The lowest contact angle of 8° was obtained with SAC-4 wt% Ti which possessed sufficient Ti and appropriate fluidity. When zirconia was pre-metallized with SAC-4 wt% Ti alloy, the typical microstructure of the copper/SAC/zirconia joint was copper/Cu6Sn5 layer/β-Sn layer containing Ti3Sn and Ti6Sn5 phases/Ti3Sn layer/TiOx layer/zirconia. As the Ti content increased, more Ti-Sn intermetallic compounds remained in the seam, and the shear strength increased first and thereafter decreased. The highest shear strength of 19.1 MPa was achieved as zirconia was pre-metallized with SAC-4 wt% Ti. Fracture analyses indicated that brittle fracture was initiated at the reaction layers adjacent to zirconia and propagated in the seam during shear test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Braze oxidation behavior and joint microstructure in YSZ/steel joints made using palladium brazes for SOFC applications10.1016/j.msea.2007.08.032 ↗
2. Interfacial characterization of YSZ-to-steel joints with Ag-Cu-Pd interlayers for solid oxide fuel cell applications10.1016/j.ceramint.2011.10.033 ↗
3. Brazing ZrO2 ceramic to Ti-6Al-4V alloy using NiCrSiB amorphous filler foil: interfacial microstructure and joint properties10.1016/j.matchar.2013.04.009 ↗
4. Joining of zirconia to zirconia using AgCuTi filler metal10.1016/0924-0136(94)01611-4 ↗
5. Microstructural and mechanical properties of jointed ZrO2/Ti-6Al-4V alloy using Ti33Zr17Cu50 amorphous brazing filler10.1016/j.matdes.2012.12.023 ↗
6. Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: interfacial microstructure and mechanical properties10.1016/j.matdes.2014.01.029 ↗
7. Interfacial microstructure of partial transient liquid phase bonding of Si3N4 to nickel-base superalloy using Ti/Au/Ni interlayers10.1016/j.vacuum.2016.04.033 ↗
8. An insight into microstructural evolution during plastic deformation in AA6061 alloy after friction welding with alumina-YSZ composite10.1016/j.mechmat.2015.07.010 ↗
9. Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint10.1016/j.vacuum.2017.03.037 ↗
10. Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag-Cu+B10.1016/j.jeurceramsoc.2016.02.033 ↗
11. Induction brazing for gas sealing of anode-supported tubular solid oxide fuel cells using the nickel based brazing alloy modified by TiH210.1016/j.ijhydene.2010.01.087 ↗
12. Reactive brazing Cf/SiC to itself and to Mo using the NiPdPtAu-Cr filler alloy10.1016/j.jeurceramsoc.2017.05.025 ↗
13. Joining of Cf/SiC composite with a Cu-Au-Pd-V brazing filler and interfacial reactions10.1016/j.jeurceramsoc.2013.12.022 ↗
14. A Cu-Pd-V system filler alloy for silicon nitride ceramic joining and the interfacial reactions10.1111/jace.13005 ↗
15. Brazing copper to alumina using reactive CuAgTi alloys10.1016/j.actamat.2009.10.029 ↗
16. Microstructure and mechanical properties of MoSi2-MoSi2 joints brazed by Ag-Cu-Zr interlayer10.1016/j.matdes.2013.01.027 ↗
17. Effect of Ti content on the wetting behavior of Sn0.3Ag0.7Cu/AlN system10.1016/j.matdes.2016.11.041 ↗
18. Bonding mechanisms in silicon nitride brazing10.1111/j.1151-2916.1990.tb06552.x ↗
19. Microstructural evolution and growth behavior ofIn situ TiB whisker array in ZrB2-SiC/Ti6Al4V brazing joints10.1111/jace.12629 ↗
20. Brazing of yttria-stabilized zirconia (YSZ) to stainless steel using Cu, Ag, and Ti-based brazes10.1007/s10853-007-1985-z ↗
21. Brazing of stainless steel to yttria-stabilized zirconia using gold-based brazes for solid oxide fuel cell applications10.1111/j.1744-7402.2007.02126.x ↗
22. The relation between wetting and interfacial chemistry in the CuAgTi/alumina system10.1016/j.actamat.2005.11.048 ↗
23. Interfacial reaction behavior and mechanical characterization of ZrO2/TC4 joint brazed by Ag-Cu filler metal10.1016/j.msea.2015.08.067 ↗
24. Effect of interfacial thickness and residual stress on the mechanical property of the alumina-stainless steel braze joint interface10.1016/j.msea.2008.07.060 ↗
25. Microstructural evolution in the braze joint of sapphire to Kovar alloy by Ti-Cu metallization layer10.1016/j.jmatprotec.2017.05.016 ↗
26. Evolution of the interlayer microstructure and the fracture modes of the zirconia/Cu-Ag-Ti filler/Ti active brazing joints10.1016/j.matlet.2006.05.024 ↗
27. Joining of zirconia ceramic to stainless steel and to itself using Ag57Cu38Ti5 filler metal10.1111/j.1151-2916.1995.tb08629.x ↗
28. Microstructures and interfacial behavior of zirconia/stainless steel joint prepared by pressureless active brazing10.1016/j.jallcom.2008.02.063 ↗
29. Brazing titanium-vapor-coated zirconia
30. Brazing of metals to zirconia mechanically metallized with titanium10.1590/S1678-58782010000400009 ↗
31. Metallization of Al2O3 ceramic by magnetron sputtering Ti/Mo bilayer thin films for robust brazing to Kovar alloy10.1016/j.ceramint.2016.03.044 ↗
32. Microstructural evolution during the brazing of Al2O3 ceramic to kovar alloy by sputtering Ti/Mo films on the ceramic surface10.1016/j.ceramint.2016.04.094 ↗
33. Brazing ceramic oxides to metals at low temperatures
34. Application of ion implantation to ceramic/metal joining10.1016/S0168-583X(96)01152-4 ↗
35. Wettability and spreading kinetics of molten aluminum on copper-coated ceramics10.1007/s10853-006-0443-7 ↗
36. Wettability of zirconium-coated alumina by molten aluminum10.1016/j.surfcoat.2016.05.072 ↗
37. Interfacial reactions between sapphire and silver-copper-titanium thin film filler metal10.1111/j.1151-2916.1997.tb02849.x ↗
38. Alumina-copper joining by the sintered metal powder process10.1016/j.ceramint.2009.10.016 ↗
39. Brazing copper and alumina metallized with Ti-containing Sn0.3Ag0.7Cu metal powder10.1016/j.matdes.2015.08.081 ↗
40. Intermetallic compound layer growth between SnAgCu solder and Cu substrate in electronic packaging10.1007/s10854-013-1236-9 ↗
41. Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints10.1016/S0925-8388(02)01166-0 ↗
42. Study of solidification cracks in Sn-Ag-Cu lead-free solder joints10.1007/s11664-009-0839-7 ↗
43. Effect of Ti content on the metallization layer and copper/alumina brazed joint10.1016/j.ceramint.2017.07.016 ↗
44. Murray · 1987
45. Characterization of yttria-stabilized-zirconia/stainless steel joint interfaces with gold-based interlayers for solid oxide fuel cell applications10.1016/j.jeurceramsoc.2013.08.036 ↗
46. Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers10.1016/j.ceramint.2013.07.119 ↗
47. Thermodynamic assessment of the Sn-Ti system10.1007/s00706-005-0392-x ↗
48. Solubility of several first-long-period transition elements in liquid tin
49. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys10.1016/j.carbon.2017.06.030 ↗