Study of the high temperature oxidation performance of Thermal Barrier Coatings with HVOF sprayed bond coat and incorporating a PVD ceramic interlayer
Source abstract
Abstract
Abstract The performance of an intermediate Cr 3 C 2 ceramic layer applied by PVD between the bond coat and the ceramic top coat in a TBC system was evaluated. The thickness of the transitional layer was kept around 1–2 μm. Two substrate materials and two distinct bond coats were combined in the tests. High Velocity Oxygen Fuel (HVOF) and Atmospheric Plasma Spraying (APS) were used respectively for bond coat and top coat deposition. Isothermal oxidation tests were performed at 1000 °C in static air atmosphere. Thermal grown oxide (TGO) was measured and correlated to the exposition times. Results are discussed in terms of the TGO growth rate and changes in residual stresses. The results suggest an improvement in the oxidation resistance of the bond coat because of the presence of the intermediate layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Thermal barrier coatings beat the heat
2. The place of thermal spraying in industry today and the prospects for the future
3. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
4. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
5. Creating an effective barrier
6. New material concepts for the next generation of plasma-sprayed thermal barrier coatings
7. Coating selection critical to turbine performance
8. Characteristics of MCrAlY coatings sprayed by high velocity oxygen-fuel spraying system10.1115/1.483173 ↗
9. HVOF thermal spray deposited Y2O3-stabilized ZrO2 coatings for thermal barrier applications10.1361/105996303770348320 ↗
10. P. Vuoristo, S. Ahmaniemi, S. Tuurna, T. Mantyla, E. Cordano, F. Fignino, G.C. Gualco, Development of HVOF sprayed NiCoCrAlYRe coatings for use as bond coats of plasma sprayed thermal barrier coatings, in: Proceedings of the ITSC 2002—International Thermal Spray Conference and Exposition, vol. 1, Essen, Germany, ASM-International/DVS, 2002, pp. 470–475.10.31399/asm.cp.itsc2002p0470 ↗
11. High temperature oxidation interfacial growth kinetics in YSZ thermal barrier coatings with bond coatings of NiCoCrAlY with 0.25% Hf10.1016/j.msea.2010.11.066 ↗
12. Effect of exposure conditions on the oxidation of MCrAlY-bondcoats and lifetime of thermal barrier coatings10.1016/j.surfcoat.2009.09.056 ↗
13. Cyclic oxidation behavior of HVOF bond coatings deposited on La- and Y-doped superalloys10.1016/j.surfcoat.2011.06.044 ↗
14. Modifications of thermal barrier coatings (TBCs)10.1016/S0257-8972(97)00493-3 ↗
15. Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying10.1016/j.surfcoat.2010.03.043 ↗
16. Characterization of thermally grown oxide on cold sprayed CoNiCrAlY bond coat in thermal barrier coating10.4028/www.scientific.net/MSF.696.324 ↗
17. Strain gradients in plasma-sprayed zirconia thermal barrier coatings10.1016/S0257-8972(98)00616-1 ↗
18. Residual stresses in plasma sprayed Y2O3-PSZ coatings on piston heads10.1016/S0257-8972(96)02948-9 ↗
19. Bennett · Surface and Coatings Technology · 1987 · 32 · 35910.1016/0257-8972(87)90120-4 ↗
20. Interface thermal fracture in functionally graded zirconia-mullite-bond coat alloy thermal barrier coating10.1016/S1359-6454(02)00396-8 ↗
21. Mechanical properties and oxidation resistance of plasma-sprayed multilayered Al2O3/ZrO2 thermal barrier coatings10.1016/j.surfcoat.2005.02.087 ↗
22. Integrity of nanostructured partially stabilized zirconia after plasma spray processing
23. Atmospheric plasma sprayed coatings of nanostructures zirconia10.1016/S0955-2219(01)00291-6 ↗
24. Matsumoto · Scripta Materialia · 2006 · 54 · 203510.1016/j.scriptamat.2006.03.015 ↗
25. C.R.C. Lima, J.M. Guilemany, Functional intermediate layers for the improvement of Thermal Barrier Coatings performance, in: Proceedings of the Materials Science and Technology Conference and Exhibition, MS and T'07—“Exploring Structure, Processing, and Applications Across Multiple Materials Systems”, vol. 4, 2007, pp. 2204–2211.
26. Proto-TGO formation in TBC systems fabricated by spark plasma sintering10.1016/j.surfcoat.2010.09.042 ↗
27. Thermal barrier coatings: characteristics of microstructure and properties, generation and directions of development of bond
28. Development of Plasma Sprayed Thermal Barrier Coatings with low thermal conductivity and high oxidation resistance10.2109/jcersj.115.118 ↗
29. Effect of thermal exposure on stress distribution in TGO layer of EB-PVD TBC10.1016/S1359-6454(03)00046-6 ↗