Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents
Source abstract
Abstract
Abstract Using emulsions of cyclohexane-in-water as pore-forming agent, porous SiC green bodies were prepared by gelcasting technology. Effects of the amount of oil and emulsifier on the microstructure, the porosity, the compressive strength and the drying linear shrinkage of the porous SiC green bodies were examined. By adjusting the amount of oil and emulsifier, the average pore size varied from 10.77 μm to 26.40 μm, the porosity varied from 63.57% to 80.19%, and the compressive strength varied from 14.7 MPa to 1.7 MPa. The compressive strength of the typical sintered specimens with porosity of 62.17% reached 60.69 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Production of ceramic foam filters for molten metal filtration using expanded polystyrene10.1016/j.jeurceramsoc.2006.04.129 ↗
2. Preparations of C/SiC composites and their use as supports for Ru catalyst in ammonia synthesis10.1016/j.molcata.2008.11.009 ↗
3. SiC foams as a promising structured photocatalytic support for water and air detoxification10.1016/j.cattod.2012.12.008 ↗
4. Multilayer SiC for thermal protection system of space vehicles with decreased thermal conductivity through the thickness10.1016/j.jeurceramsoc.2010.01.040 ↗
5. A study of surface-coated SiC whiskers on carbon fiber substrates and their properties for diesel particulate filter applications10.1016/j.ceramint.2010.12.016 ↗
6. Wastewater treatment using bioreactor with dual functional ceramic membrane10.1504/IJEP.2009.027232 ↗
7. Z-source inverter with SiC power semiconductor devices for fuel cell vehicle applications10.6113/JPE.2011.11.4.606 ↗
8. A review of bioceramics and fibrin sealant10.22203/eCM.v008a01 ↗
9. Factors that influence the flexural strength of SiC-based porous ceramics used for hot gas filter support10.1016/j.jeurceramsoc.2010.11.033 ↗
10. Effect of processing on the microstructure and crystalline phase composition of wood derived porous SiC ceramics10.1016/j.jeurceramsoc.2010.08.009 ↗
11. Fabrication of biomorphic SiC composites using wood preforms with different structures10.1016/j.ceramint.2011.12.008 ↗
12. Thermal conductivity and microstructure properties of porous SiC ceramic derived from silicon carbide powder10.4236/njgc.2013.31007 ↗
13. Low-temperature processing of porous SiC ceramics10.1007/s10853-012-6963-4 ↗
14. Silicon carbide-based foams from direct blowing of polycarbosilane10.1016/j.jeurceramsoc.2011.09.009 ↗
15. Combustion synthesis of high porosity SiC foam with nanosized grains10.1016/j.ceramint.2010.03.026 ↗
16. Fabrication of porous alumina green bodies from suspension emulsions by gelcasting10.1016/j.matlet.2012.04.112 ↗
17. Tailoring the microstructure of particle-stabilized wet foams10.1021/la0624844 ↗
18. Processing of porous silicon carbide with toughened strut microstructure10.2109/jcersj2.118.380 ↗
19. Processing of open‐cell silicon carbide foams by steam chest molding and carbothermal reduction10.1111/j.1551-2916.2010.04311.x ↗