Barium titanate screen-printed thick films
Source abstract
Abstract
Abstract Barium titanate (BT) thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2 . After homogenization and milling in a high-energy vibro mill, the powders were calcined at 700 °C for 2 h by slow heating and cooling rates. A thick film paste was prepared by mixing BT fine powders with small amount of low temperature sintering aid and organic binder. The thick films were screen-printed on alumina substrates electroded with Ag-Pd. The BT films were sintered at 850 °C for 1 h. The thickness was 25–75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate were investigated by SEM .Results of dielectric property measurements are also reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. G.H. Haertling, in: R.K. Pandley, D.E. Witter, U. Varshney (Eds.), Integrated Thin Films and Applications, Ceramic Transactions, vol. 86, 1999, pp. 235–261.
2. W. Borland, Thick Film Hybrids, Vol. 1., ASM International, 1989.
3. J.L. Larry, R.M. Resenberg, R.O. Uhler, Thick film technology: an introduction to the materials, IEEE Trans, CHMT-3 (1980) 211–225.10.1109/TCHMT.1980.1135609 ↗
4. Mechanism of eletrophoretic deposition10.1002/jctb.5010150505 ↗
5. Fabrication of green films of single and multi-component ceramic composites by eletrophoretic deposition technique10.1023/A:1018608605080 ↗
6. Effect of polyacrilic acid on the preparation of thick silica films by sol–gel deposition10.1023/A:1004396703147 ↗
7. Producing ceramic laminate composites by EDP
8. Mechanical activation of the synthesis reaction of BaTiO3 from a mixture of BaCO3 and TiO2 powders10.1016/S0272-8842(99)00053-X ↗
9. Kostic · Am. Ceram. Soc. Bull. · 1997 · 76 · 60
10. Nanosized barium titanate powder by mechanical activation10.1111/j.1151-2916.2000.tb01179.x ↗
11. Implication of fine grinding in processing-mechanochemical approach10.1023/A:1010178413725 ↗
12. Mechanochemical synthesis PZT of mixed oxides10.1111/j.1151-2916.1999.tb01987.x ↗
13. Electrophoretic deposition and characterization of micrometer-scale BaTiO310.1111/j.1151-2916.2000.tb01570.x ↗
14. Effect of glass composition on the electrical properties of thick films10.1111/j.1151-2916.2000.tb01574.x ↗
15. M. Prudenziati, R. dell'Acqua in: M. Prudenziati (Ed.), Thick film resistors, Elsevier Science, Amsterdam, 1994.
16. A model for sheet thick film10.1109/33.87321 ↗
17. Thick film technology: an historical perspective
18. Interaction between alumina and PLZT thick films10.1016/S0025-5408(99)00227-5 ↗
19. Holc · J. Mater. Sci. Lett. · 1989 · 8 · 63610.1007/BF01730427 ↗
20. Grain growth during sintering of BaTiO3 with LiF10.1080/00150199608218057 ↗
21. The effect of LiF on the dielectric and microstructural properties of low temperature sintered BaTiO3 ceramics
22. Morten, B., De Cicco, G., Gandolfi, A., Tonelli, C. in: Proc. of 8th Europian Hybrid Microelectronics Conference, ISHM-Europe 91, Rotterdam, 1991 392–399.
23. New dielectric compositions for capacitors