Thermal and chemical parameters controlling phase stability and caesium immobilisation in phosphate-based geopolymers, using a chabazite-rich volcanic tuff
Source abstract
Abstract
Acid-activated phosphate-based geopolymers emerged as alternatives to Portland cement thanks to their promising mechanical and thermal properties, as well as their potential for the solidification/stabilisation of hazardous wastes. In this regard, a peculiar application field can be found in radioactive waste management operations, where the immobilisation of radionuclides is one of the primary objectives. However, limited knowledge is available regarding the effectiveness of this kind of binders in this context. This study investigated the use of a natural, chabazite-rich, volcanic tuff as a novel precursor for phosphate-based geopolymers in radioactive waste management applications. The effects of the phosphoric acid concentration and the curing temperature on the geopolymerisation process were assessed. Elemental dissolution tests were used to estimate the release of aluminium, silicon, and iron from the volcanic tuff, showing extensive aluminium release due to the instability of chabazite in acid environments. The mineralogical and microstructural evolution of the samples was examined via quantitative phase analysis by X-ray diffraction and scanning electron microscopy, confirming chabazite dissolution and the subsequent formation of crystalline taranakite phase primarily governed by phosphoric acid concentration. Caesium retention, a key requirement for radioactive waste conditioning, was assessed through leaching tests. All samples demonstrated excellent caesium immobilisation capabilities, outperforming traditional cementitious matrices and comparable to alkali-activated geopolymers. The samples also met the Italian waste acceptance criterion for radioactive waste disposal. Therefore, chabazite-rich volcanic tuff can serve as a viable, natural precursor for phosphate-based geopolymers, providing a lower-impact alternative to other commonly used precursors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Phosphate-activated geopolymers: advantages and application10.1039/D3RA05131E ↗
2. Silico-aluminophosphate and alkali-aluminosilicate geopolymers: a comparative review10.3389/fmats.2019.00106 ↗
3. Life cycle assessment of precast geopolymer products
4. Life cycle assessment of self-healing geopolymer concrete
5. Alkali-activated materials and geopolymer: a review of common precursors and activators addressing circular economy10.1007/s43615-021-00029-w ↗
6. Geopolymer materials based on natural zeolite
7. A review of natural and anthropogenic radionuclide pollution in marine bivalves10.1016/j.scitotenv.2023.165030 ↗
8. Balonov · 2007 · 120
9. Pre-impregnation approach to encapsulate radioactive liquid organic waste in geopolymer10.1016/j.jnucmat.2023.154608 ↗
10. Design of sustainable geopolymeric matrices for encapsulation of treated radioactive solid organic waste10.3389/fmats.2022.1005864 ↗
11. Pre-disposal management of spent ion-exchange resins by Fenton oxidation treatment and conditioning in an alkali-activated matrix10.1016/j.nucengdes.2024.113621 ↗
12. Cesium immobilization in metakaolin-based geopolymers elucidated by 133Cs solid state NMR spectroscopy10.1016/j.jnucmat.2022.153570 ↗
13. Cold reaction sintering of geopolymers for enhanced Cs+ immobilization: synthesis, characterization, and leaching behavior10.1016/j.jeurceramsoc.2024.117166 ↗
14. Cesium immobilization of high pH and low pH belite-rich cement under varying temperature10.1016/j.jhazmat.2024.133995 ↗
15. Surface chemistry and radionuclide anion immobilisation potential of phosphoric acid-activated metakaolin-based geopolymers10.1016/j.cemconres.2024.107549 ↗
16. Adsorption behaviour of simulant radionuclide cations and anions in metakaolin-based geopolymer10.1016/j.jhazmat.2022.128373 ↗
17. Assessment of structural stability and leaching characteristics of phosphate-based geopolymer waste form containing radioactive spent ion exchange resins10.1016/j.jnucmat.2025.155671 ↗
18. Phosphoric acid-activated metakaolin-based geopolymer: optimizing P/A molar ratio to solidify Cs+ and Sr2+ in nuclear waste10.1016/j.nucengdes.2024.113300 ↗
19. Removal of lead ions from aqueous solution using phosphate‐based geopolymer cement composite10.1002/jctb.6657 ↗
20. Comparative study on the preparation of phosphate-based geopolymers using different activators10.1016/j.conbuildmat.2024.137000 ↗
21. Role of soluble aluminum species in the activating solution for synthesis of silico-aluminophosphate geopolymers10.1016/j.cemconcomp.2018.07.011 ↗
22. Effect of the viscosity of alkali activators on the particle packing of geopolymer mortar10.1061/JMCEE7.MTENG-18711 ↗
23. Effect of phosphoric acid content on the microstructure and compressive strength of phosphoric acid-based metakaolin geopolymers10.1016/j.heliyon.2020.e03853 ↗
24. Strength, microstructure, CO2 emission and economic analyses of low concentration phosphoric acid-activated fly ash geopolymer10.1016/j.conbuildmat.2023.130920 ↗
25. Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures10.1016/j.cemconres.2021.106425 ↗
26. The role of curing temperature and reactive aluminum species on characteristics of phosphate geopolymer10.1039/D2RA04562A ↗
27. Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements10.1016/j.clay.2017.07.036 ↗
28. Preparation, characterization, and environmental impact analysis of natural Ecuadorian zeolite tuff-based silicoaluminophosphate geopolymer10.1016/j.conbuildmat.2024.137126 ↗
29. Retention mechanism of cesium in chabazite embedded into metakaolin-based alkali activated materials10.1016/j.jhazmat.2022.129732 ↗
30. Cation exchange of cesium and cation selectivity of natural zeolites: chabazite, stilbite, and heulandite10.1016/j.micromeso.2018.01.025 ↗
31. iRE-SOLVE process for the pre-disposal management of spent ion-exchange resins10.1021/acs.iecr.5c01196 ↗
32. GSAS-II : the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
33. The American mineralogist crystal structure database
34. Quantitative phase analysis using the Rietveld method: towards a procedure for checking the reliability and quality of the results
35. 2019
36. Methods to evaluate and quantify the geopolymerization reactivity of waste-derived aluminosilicate precursor in alkali-activated material: a state-of-the-art review10.1016/j.conbuildmat.2022.129784 ↗
37. Quantitative XRD study of amorphous phase in alkali activated low calcium siliceous fly ash10.1016/j.conbuildmat.2016.07.081 ↗
38. Phosphate-activated high-calcium fly ash acid-base cements10.1016/j.cemconcomp.2015.09.002 ↗
39. Investigation of Phosphate based geopolymers formation mechanism10.1016/j.jnoncrysol.2021.120777 ↗
40. Kinetics and mechanisms of acid‐pH weathering of pyroxenes
41. Structural, thermal and dielectric properties of phosphoric acid-based geopolymers with different amounts of H3PO410.1016/j.matlet.2013.10.075 ↗
42. Thermochemical study of the structural stability of low-silicate CHA zeolite crystals10.1016/j.rechem.2022.100466 ↗
43. Chabazite: stable cation-exchanger in hyper alkaline concrete pore water10.1021/es505346j ↗
44. Laboratory formation and characterization of taranakite in a hydrol humic latosol soil from Hawaii
45. Brushite, hydroxylapatite, and taranakite from Apulian caves (southern Italy): new mineralogical data
46. The reaction of calcium during the formation of metakaolin phosphate geopolymer binder10.1016/j.cemconres.2022.106840 ↗
47. The influence of composite modification of precursor and activator on the properties of the silica-aluminum phosphate geopolymer10.1016/j.ceramint.2025.01.176 ↗
48. Preparation of acid aluminum phosphate solutions for metakaolin phosphate geopolymer binder10.1039/D1RA05433C ↗
49. Study on synergistic leaching of potassium and phosphorus from potassium feldspar and solid waste phosphogypsum via coupling reactions10.1016/j.cjche.2023.06.020 ↗
50. Comparison of feldspar and meta-halloysite geopolymers by alkaline and acidic activation10.1016/j.conbuildmat.2024.135953 ↗
51. Comparison of feldspar and meta-halloysite geopolymers by alkaline and acidic activation10.1016/j.conbuildmat.2024.135953 ↗
52. Incorporation of nanoalumina in potassium feldspar-based phosphoric acid activated geopolymer composites: a sustainable approach10.13074/jent.2024.09.243840 ↗
53. Mechanism and kinetics of aluminum and iron leaching from coal fly ash by sulfuric acid10.1016/S0009-2509(98)00201-2 ↗
54. Effect of mechanical activation on acid-leaching of kaolin residue10.1016/j.clay.2010.01.019 ↗
55. Dissolution kinetics of aluminum and iron from coal mining waste by hydrochloric acid10.1016/j.cjche.2014.05.017 ↗
56. Dissolution behaviors and mechanisms of metakaolin in acidic activators10.1016/j.cemconres.2024.107442 ↗
57. Description of Si and Al Release from Aluminosilicate in the Acidic Condition Using Density Functional Theory: protonated Terminal Oxygen10.3390/su142114390 ↗
58. Structure and properties of phosphate-based geopolymer synthesized with the spent fluid catalytic-cracking (SFCC) catalyst10.3390/gels8020130 ↗
59. Effects of magnesia and borax on the compressive strength and microstructure of phosphoric acid-activated metakaolin geopolymer10.1016/j.clay.2024.107344 ↗
60. Effect of curing temperature on the synthesis, structure and mechanical properties of phosphate-based geopolymers10.1016/j.jnoncrysol.2019.01.032 ↗
61. Novel one-part ferro-phosphate geopolymer cement
62. Proposition of geopolymers obtained through the acid activation of iron ore tailings with phosphoric acid10.1016/j.conbuildmat.2023.133078 ↗
63. Immobilization of radioactive borate liquid waste using calcined laterite–phosphoric acid–Fe3O4-based geopolymer waste forms10.1016/j.ceramint.2024.09.166 ↗
64. Setting and hardening behavior of volcanic ash phosphate cement
65. Kaolin bleaching by leaching using phosphoric acid solutions10.29356/jmcs.v59i3.35 ↗
66. Problems in the dissolution of silicates by acid mixtures10.1039/AN9861101107 ↗
67. The hydrothermal solubility of silica10.2113/gsecongeo.39.1.25 ↗
68. Acid-based geopolymers: understanding of the structural evolutions during consolidation and after thermal treatments10.1016/j.jnoncrysol.2019.02.025 ↗
69. Long-term dissolution behavior of amorphous aluminosilicate in sodium hydroxide solution for geopolymer synthesis using circulating fluidized bed combustion fly ash10.1016/j.conbuildmat.2023.132143 ↗
70. Correlation between dissolubilities of Si, Al, and Fe from aluminosilicate precursor and strength of fly ash-based geopolymer10.1016/j.conbuildmat.2023.132107 ↗
71. Influence of the geopolymer formulation on the endogeneous shrinkage10.1016/j.conbuildmat.2021.123813 ↗
72. Recent advances in immobilization of radioactive cesium and strontium-bearing wastes in alkali activated materials – a review10.1016/j.jenvman.2024.122746 ↗
73. Perturbation of taranakite formation by ferrous and ferric iron under acidic conditions10.2136/sssaj2000.643885x ↗
74. Rapid solidification of highly loaded high‐level liquid wastes with magnesium phosphate cement10.1016/j.ceramint.2018.11.206 ↗
75. Radiation stability and durability of magnesium phosphate cement for radioactive reactive metals encapsulation10.1016/j.pnucene.2024.105463 ↗
76. 2023
77. Physical barrier effect of geopolymeric waste form on diffusivity of cesium and strontium10.1016/j.jhazmat.2016.07.003 ↗