journal article·2025-08Open access

Improved fracture toughness of ZrO2-Li2Si2O5 glass ceramics prepared by sol-gel method and spark plasma sintering

Ting Zhao, Yanzi Liu, Zhiyuan Liu, Zhaoqi Hu, Jianfeng Zhu, Yi Qin

Ceramics International· Volume 51· Issue 19

Abstract

Although zirconia (ZrO 2 ) ceramics and lithium disilicate (Li 2 Si 2 O 5 ) glass ceramics are widely used in the field of dental restoration due to their superior properties, there remians an urgent demand to combine their complementary advantages through preparing composite materials for enhanced comprehensive performance to meet higher restoration requirements. In this study, ZrO 2 -Li 2 Si 2 O 5 powder was prepared through the sol-gel method and followed by spark plasma sintering at 900 °C for 10 min, the glass ceramics were successfully obtained. The effects of the ratio of ZrO 2 to Li 2 Si 2 O 5 on the phase composition, crystallinity, microstructure and mechanical properties of the glass ceramics were systematically investigated. The results showed that with the increase of Li 2 Si 2 O 5 content, the sintering densification process of glass ceramics was accelerated, and the crystallization of Li 2 Si 2 O 5 crystals gradually increased, while the content of t-ZrO 2 , m-ZrO 2 and ZrSiO 4 crystals decreased, and the grains size increased. Which led to an increase and then a decrease in mechanical properties, especially the fracture toughness. When ZrO 2 :Li 2 Si 2 O 5 is 1:2 (ZLS2), the glass ceramic exhibited the best comprehensive mechanical properties with a flexural strength of 390 ± 26 MPa and a significantly improved fracture toughness of 7.47 ± 0.42 MPa·m 1/2 . The improvement of performance is mainly due to the crack deflection, crack bridging, the stress caused by the differences in the coefficient of thermal expansion of different phases, and the dislocations generated in ZrO 2 .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Long term fatigue behavior of zirconia based dental ceramics10.3390/ma3052975 ↗
2. Effects of pore connectivity and microstructure on mechanical performance of ZrO2 scaffolds and PMMA-infiltrated ZrO2 composites10.1016/j.jallcom.2017.08.277 ↗
3. State of the art of zirconia for dental applications10.1016/j.dental.2007.05.007 ↗
4. Wear of ceramic-based dental materials10.1016/j.jmbbm.2019.01.009 ↗
5. High-translucent yttria-stabilized zirconia ceramics are wear-resistant and antagonist-friendly10.1016/j.dental.2019.10.009 ↗
6. Low-temperature degradation of different zirconia ceramics for dental applications10.1016/j.actbio.2011.11.016 ↗
7. Insights on ceramics as dental materials. Part I: ceramic material types in dentistry10.1007/s12633-011-9078-7 ↗
8. Atomic picture of crack propagation in Li2O-2SiO2 glass-ceramics revealed by molecular dynamics simulations10.1111/jace.17183 ↗
9. Glass-Ceramics with high strength and high transmittance obtained by multi-factor controlling10.1007/s11595-024-2911-9 ↗
10. Improved performances of lithium disilicate glass-ceramics by seed induced crystallization10.1007/s40145-021-0463-4 ↗
11. Preparation of Li2Si2O5 fibers and their toughening effects on lithium disilicate glass-ceramics10.1016/j.ceramint.2024.01.265 ↗
12. Clinical outcome of three-unit lithium-disilicate glass-ceramic fixed dental prostheses: up to 8 years results10.1016/j.dental.2009.05.003 ↗
13. Load bearing capability of three-units 4Y-TZP monolithic fixed dental prostheses: an innovative model for reliable testing10.1016/j.matdes.2023.111751 ↗
14. Clinical performance of occlusal onlays made of lithium disilicate ceramic in patients with severe tooth wear up to 11 years10.1016/j.dental.2019.06.001 ↗
15. Fatigue and fracture properties of yttria partially stabilized zirconia crown systems10.1016/j.dental.2007.05.011 ↗
16. Influence of ZrO2 on the crystallization and properties of lithium disilicate glass-ceramics derived from a multi-component system10.1016/j.jeurceramsoc.2006.04.103 ↗
17. Optimized sintering and mechanical properties of Y-TZP ceramics for dental restorations by adding lithium disilicate glass ceramics10.1007/s40145-021-0507-9 ↗
18. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic10.1016/j.dental.2016.03.013 ↗
19. Effect of microstructure on the mechanical properties of lithium disilicate glass-ceramics10.1016/j.jmbbm.2018.02.032 ↗
20. Impact of crystallization firing process on the microstructure and flexural strength of zirconia-reinforced lithium silicate glass-ceramics10.1016/j.dental.2018.06.010 ↗
21. Effect of ZrO2 addition on the structure and the crystallization delay in lithium disilicate based glasses10.1016/j.jssc.2022.123600 ↗
22. Microstructure and mechanical properties of zirconia-toughened lithium disilicate glass-ceramic composites10.1016/j.matchemphys.2013.10.023 ↗
23. Influence of ZrO2 and P2O5 addition on phase formation, optical transmittance and microhardness in lithium disilicate based glass-ceramics10.1016/j.jnoncrysol.2022.122023 ↗
24. Microstructure and bending strength of 3Y-TZP ceramics by liquid-phase sintering with CAS addition10.1016/S0272-8842(02)00097-4 ↗
25. Sol-gel preparation of ZrO2-Li2Si2O5 ceramics and their sintering properties10.1016/j.jmbbm.2021.105032 ↗
26. Densification of nanocrystalline Y2O3 ceramic powder by spark plasma sintering10.1016/j.jeurceramsoc.2008.05.043 ↗
27. Transparent single crystalline ZrO2-SiO2 glass nanoceramic sintered by SPS10.1016/j.jeurceramsoc.2016.05.016 ↗
28. Phase equilibria in the refractory oxide systems of zirconia, hafnia and yttria with rare-earth oxides10.1016/j.jeurceramsoc.2008.01.009 ↗
29. Fabrication and characterization of bioactive zirconia-based nanocrystalline glass-ceramics for dental abutment10.1016/j.ceramint.2021.06.097 ↗
30. A free and open-source solution for Rietveld refinement of XRD data from the CheMin instrument onboard the Mars rover Curiosity10.1016/j.pss.2022.105596 ↗
31. Sintering properties of sol-gel derived lithium disilicate glass ceramics10.1007/s10971-018-4738-3 ↗
32. Fabrication of ZrO2-Bearing lithium-silicate glass-ceramics by pressureless sintering and spark plasma sintering10.1016/j.jmbbm.2020.103709 ↗
33. Influence of SiO2 contents on the microstructure and mechanical properties of lithium disilicate glass-ceramics by reaction sintering10.1016/j.jnoncrysol.2019.02.015 ↗
34. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
35. Effects of twin boundaries and pre-existing defects on mechanical properties and deformation mechanisms of yttria-stabilized tetragonal zirconia10.1016/j.jeurceramsoc.2019.09.017 ↗
36. Nanomechanics of Hall-Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
37. Study of lithium disilicate based nano glass ceramics containing P2O510.1007/s12633-021-01610-6 ↗
38. Influence of Al2O3 whisker concentration on mechanical properties of WC-Al2O3 whisker composite10.1016/j.ceramint.2015.07.167 ↗
39. Processing of ZrO2 strengthened and toughened WC matrix composites based on ML10.1016/j.jeurceramsoc.2024.03.022 ↗
40. Theoretical insights into the Peierls plasticity in SrTiO3 ceramics via dislocation remodelling10.1038/s41467-022-34741-4 ↗
41. Microstructure and mechanical properties of zirconia-toughened lithium disilicate glass-ceramic composites10.1016/j.matchemphys.2013.10.023 ↗
42. Transparent alumina nanoceramics prepared under high pressure and low temperature
43. Determination of fracture toughness of Y-TZP ceramics10.1016/j.ceramint.2017.09.004 ↗
44. High fracture toughness of 3Y-TZP ceramic over a wide sintering range10.1016/j.matchemphys.2020.122693 ↗
45. Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content10.1016/S1359-6454(02)00283-5 ↗
46. Ceramic toughening strategies for biomedical applications10.3389/fbioe.2022.840372 ↗
47. Spectroscopic properties and structure refinement of Nd3+:(Y0.9La0.1)2O3 transparent ceramics10.1016/j.optmat.2014.05.009 ↗
48. Transparent sintered corundum with high hardness and strength10.1111/j.1151-2916.2003.tb03270.x ↗
49. Fracture toughness and hardness of transparent MgO-Al2O3-SiO2 glass-ceramics10.1016/j.ceramint.2021.12.195 ↗