Microwave-absorbing performance of a radar-absorbing structure composed of K0.5Na0.5NbO3/ZrO2/Al2O3 heterojunction
Source abstract
Abstract
Abstract We fabricated a ZrO2/Al2O3 ceramic using the 3D plasma spraying technology, and the surface morphology and electrical properties of the prepared ceramic were investigated. The microwave-absorbing performance of the ceramic was studied based on the measured electrical properties. Furthermore, a radar-absorbing structure (RAS) was designed based on the fabricated ZrO2/Al2O3 ceramic with a K0.5Na0.5NbO3 (KNN) film heterojunction. The relationship between the structural parameters of the RAS and the microwave performance was explored. The changes in the absorption performance and band structure of the RAS with the resistance of the KNN film were investigated. The analytical results showed that the structural parameters of the KNN film can facilitate the absorption intensity as well as the bandwidth of the RAS while inducing electromagnetic coupling in the RAS system. The improvement in the absorption performance could be attributed to the resonance coupling between the ZrO2/Al2O3 ceramic and the KNN film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Full-Duplex Wireless Communications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The effect of high temperature environment on rock properties—an example of electromagnetic radiation characterization10.1007/s11356-018-2940-z ↗
2. Determination of requirements for the protection of radio-electronic equipment from the terroristic influence by electromagnetic radiation10.30534/ijeter/2019/077122019 ↗
3. Electrodeposited carbon fiber and epoxy based sandwich architectures suppress electromagnetic radiation by absorption10.1016/j.compositesb.2018.12.123 ↗
4. Zhai · 2009
5. Electromagnetic interference shielding and absorption properties of Ti3SiC2/nano Cu/epoxy resin coating10.1016/j.jallcom.2018.01.017 ↗
6. Three-phase heterostructures f-NiFe2O4/PANI/PI EMI shielding fabric with high microwave absorption performance10.1016/j.apsusc.2017.07.062 ↗
7. X-Band microwave characterization of carbon-based nanocomposite material, absorption capability comparison and RAS design simulation10.1016/j.compscitech.2009.11.015 ↗
8. Compositional and structural design of thermoplastic polyurethane/carbon based single and multi-layer composite sheets for high-performance X-band microwave absorbing applications10.1016/j.polymer.2019.121672 ↗
9. Enhanced absorbing properties of three-phase composites based on a thermoplastic-ceramic matrix (BaTiO3+ PVDF) and carbon black nanoparticles10.1039/C4TA04493B ↗
10. Electromagnetic wave absorption properties of graphene modified with carbon nanotube/poly (dimethyl siloxane) composites10.1016/j.carbon.2014.02.054 ↗
11. Fabrication and electromagnetic characteristics of electromagnetic wave absorbing sandwich structures10.1016/j.compscitech.2005.05.034 ↗
12. MXene-based accordion 2D hybrid structure with Co9S8/C/Ti3C2Tx as efficient electromagnetic wave absorber10.1016/j.cej.2021.128875 ↗
13. Dielectric and microwave absorption properties of TiAlCo ceramic fabricated by atmospheric plasma spraying10.1016/j.ceramint.2016.02.078 ↗
14. Microwave absorption properties and complex permittivity of Fe/FeAl2O4 coatings deposited by reactive plasma spraying Al/Fe2O3 powders10.1016/j.surfcoat.2011.03.025 ↗
15. High-performance microwave absorption properties of Ti3SiC2/Al2O3 coatings prepared by plasma spraying10.1007/s00339-019-3236-y ↗
16. Nanocomposite membranes based on polybenzimidazole and ZrO2 for high‐temperature proton exchange membrane fuel cells10.1002/cssc.201403049 ↗
17. High temperature conductivity studies on nanoscale yttria-doped zirconia thin films and size effects10.1063/1.2385211 ↗
18. Comparative study on corrosion behavior of plasma sprayed Al2O3, ZrO2, Al2O3/ZrO2 and ZrO2/Al2O3 coatings10.1016/S1003-6326(16)64236-X ↗
19. Coatings of metastable ceramics deposited by solution-precursor plasma spray: I. Binary ZrO2–Al2O3 system10.1016/j.actamat.2006.06.025 ↗
20. Microstructural characterization and properties of ZrO2/Al2O3 thermal barrier coatings by gas tunnel-type plasma spraying10.1016/j.vacuum.2006.01.056 ↗
21. A study on (K, Na) NbO3 thin films with optimized layer: effect on physical and electrical properties[J]10.4028/www.scientific.net/KEM.694.120 ↗
22. Enhanced dielectric and microwave absorption properties of Cr/Al2O3 coatings deposited by low‐power plasma spraying10.1111/jace.14583 ↗
23. Interfacial microstructure and bonding properties of plasma-sprayed multilayer ceramic coating (Al2O3/BaTiO3/Al2O3-40 wt.% TiO2)10.1007/s11666-020-01097-4 ↗
24. Influence of NiCrAlY content on dielectric and microwave absorption properties of NiCrAlY/Al2O3 composite coatings10.1016/j.jallcom.2018.10.392 ↗
25. Microstructure characteristics and microwave dielectric properties of calcium apatite ceramics as microwave substrates10.1016/j.jallcom.2017.10.028 ↗
26. Relationships between dopants, microstructure and the microwave dielectric properties of ZrO2-TiO2-SnO2 ceramics10.1007/BF00576276 ↗
27. Debye-like relaxation behavior and electric field induced dipole re-orientation of the 0.6 BaTiO3-0.4 Bi(Mg1/2Ti1/2)O3 ceramic10.1016/j.ceramint.2017.10.024 ↗
28. Temperature and frequency dependent dielectric response of C3H7NH3PbI3: a new hybrid perovskite10.1063/1.5142810 ↗
29. Colossal dielectric constant and non-debye type relaxor in Ca0.85Er0.1Ti1-xCo4x/3O3 (x= 0.15 and 0.2) ceramic10.1016/j.jallcom.2018.05.155 ↗
30. Broadband microwave absorption of Fe3O4BaTiO3 composites enhanced by interfacial polarization and impedance matching10.1016/j.compositesb.2019.01.008 ↗
31. Interfacial design of sandwich-like CoFe@Ti3C2Tx composites as high efficient microwave absorption materials10.1016/j.apsusc.2019.07.208 ↗
32. The effects of point defects on the electronic and magnetic properties of GaN/ZnO heterojunction polar interface10.1016/j.commatsci.2018.10.032 ↗
33. 3D hierarchical local heterojunction of MoS2/FeS2 for enhanced microwave absorption10.1016/j.cej.2019.122241 ↗
34. Prediction and validation of electromagnetic performance of curved radar-absorbing structures based on equivalent circuit model and ray tracking method10.1016/j.compscitech.2018.09.002 ↗
35. Design of wide-bandwidth electromagnetic wave absorbers using the inductance and capacitance of a square loop-frequency selective surface calculated from an equivalent circuit model10.1016/j.optcom.2015.10.011 ↗
36. Comparative study of equivalent circuit models for photoconductive antennas10.1364/OE.26.029017 ↗