journal article·2025-09Open access

Cu3Mo2O9 anodes for lithium-ion batteries with extended cyclability at high rates

J. Calbet, C. Díaz-Guerra, M.L. López, P. Almodóvar, I. Álvarez-Serrano

Ceramics International· Volume 51· Issue 22

Abstract

Copper molybdate (Cu 3 Mo 2 O 9 ) has been synthesized through different routes, namely coprecipitation, the solvothermal method and solid-state methods using different kinds of ball-milled precursors. The effects of each synthesis route on the morphological, structural and compositional characteristics of the samples were assessed, as well as their influence on the electrochemical performance as anodes for lithium-ion batteries (LIBs). X-ray diffractometry and micro-Raman spectroscopy measurements confirmed the formation of single-phase, highly crystalline orthorhombic Cu 3 Mo 2 O 9 irrespective of the synthesis conditions, which in turn strongly influence particle size and shape, as revealed by scanning electron microscopy and transmission electron microscopy. Electrochemical tests, including cyclic voltammetry and galvanostatic charge-discharge measurements, demonstrated that Cu 3 Mo 2 O 9 -based anodes show a good specific capacity and excellent cycling stability. Notably, samples obtained by mechanical milling of Cu and Mo powders followed by oxygen annealing showed a capacity of 200 mA·h·g -1 for more than 2000 cycles at a high current density of 1 A·g -1 with coulombic efficiencies above 97%. Such an outstanding long-term cycling performance is attributed to the high structural stability and compositional homogeneity achieved at macroscopic and local scales through the mechanical milling process, making this material a promising candidate for long-life, high-rate LIB applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Advances of lithium-ion batteries anode materials—A review
2. Anode materials for lithium-ion batteries: a review
3. High-performance anode materials for rechargeable lithium-ion batteries10.1007/s41918-018-0001-4 ↗
4. Nanostructured conversion-type anode materials for advanced lithium-ion batteries10.1016/j.chempr.2018.01.003 ↗
5. Growth, characterization and performance of bulk and nanoengineered molybdenum oxides for electrochemical energy storage and conversion10.1016/j.pcrysgrow.2021.100533 ↗
6. High-specific-capacity molybdate anode materials for lithium-ion batteries with good low-temperature performance10.1016/j.jallcom.2022.163914 ↗
7. Study for the construction of CoMoO4 rod-like microstructures as anode material for high rate lithium-ion batteries10.1016/j.matchemphys.2024.130207 ↗
8. Fabrication of metal molybdate micro/nanomaterials for electrochemical energy storage
9. Nanostructured copper molybdates as promising bifunctional electrocatalysts for overall water splitting and CO2 reduction10.1039/D0RA07783F ↗
10. Synthesis, characterization and electrochemical assessment of hexagonal molybdenum trioxide (h-MoO3) micro-composites with graphite, graphene and graphene oxide for lithium-ion batteries10.1016/j.electacta.2020.137355 ↗
11. 3D hierarchical flower of copper molybdate Cu3Mo2O9: synthesis, nanostructure and lithium storage properties10.1016/j.jallcom.2017.06.175 ↗
12. A quick microwave-assisted rheological phase reaction route for preparing Cu3Mo2O9 with excellent lithium storage and supercapacitor performance10.1016/j.jallcom.2021.159061 ↗
13. Construction of Cu3Mo2O9 nanoplates with excellent lithium storage properties based on a pH-dependent dimensional change10.1039/C5DT01645B ↗
14. Synthesis of flower-like Cu3[MoO4]2O from Cu3(MoO4)2(OH)2 and its application for lithium-ion batteries: structure–electrochemical property relationships10.1002/celc.201700499 ↗
15. Binder-free CaMoO4 nanostructured anode electrodes for Li-ion battery applications10.1016/j.ceramint.2024.05.456 ↗
16. Ultralong α-MoO3 nanobelts: synthesis and effect of binder choice on their lithium storage properties10.1021/jp304216z ↗
17. h-MoO3/AlCl3-urea/Al: high performance and low-cost rechargeable Al-ion battery10.1016/j.jpowsour.2021.230656 ↗
18. Nickel-doped h-MoO3 cathodes: a high-performance material for aluminum-ion batteries10.1002/bte2.20240076 ↗
19. Synthesis of polyoxometalates, copper molybdate (Cu3Mo2O9) nanopowders, for energy storage applications10.1016/j.mssp.2019.01.002 ↗
20. Monocrystal Cu3Mo2O9 confined in polyaniline protective layer: an effective strategy for promoting lithium storage stability10.1002/celc.201801753 ↗
21. Exploring titanium niobium oxides recovered from columbotantalite mineral as lithium-ion batteries electrodes10.1016/j.ceramint.2024.06.088 ↗
22. Energy storage in nanomaterials–capacitive, pseudocapacitive, or battery-like?10.1021/acsnano.8b01914 ↗
23. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
24. Hybrid energy storage of Ni(OH)2-coated N-doped graphene aerogel//N-doped graphene aerogel for the replacement of NiCd and NiMH batteries10.1038/s41598-017-01191-8 ↗
25. Tailoring the phase evolution of molybdenum-based nanocrystals in carbon nanofibers for enhanced performance of lithium-ion batteries10.1016/j.jallcom.2022.168042 ↗
26. Precise tailoring of lithium‐ion transport for ultralong‐cycling dendrite‐free all‐solid‐state lithium metal batteries
27. Ultralong cycling and wide temperature range of lithium metal batteries enabled by solid polymer electrolytes interpenetrated with a poly (liquid crystal) network10.1039/D0TA10932K ↗
28. Insight into the synergistic effect of N, S co‐doping for carbon coating layer on niobium oxide anodes with ultra‐long life10.1002/adfm.202100311 ↗
29. Hierarchical Ti–Nb oxide microspheres with synergic multiphase structure as ultra-long-life anode materials for lithium-ion batteries10.1016/j.jpowsour.2017.09.061 ↗
30. Mechanochemistry: a force of synthesis10.1021/acscentsci.6b00277 ↗
31. Low temperature X-ray absorption spectroscopy study of CuMoO4 and CuMo0.90W0.10O4 using reverse Monte-Carlo method
32. Mechanical alloying of copper with niobium and molybdenum10.1023/B:JMSC.0000039230.73188.5d ↗
33. Influence of powder ball milling pretreatment on microstructure and properties of Mo-W-Cu refractory functional alloys sintered in a normal-pressure hydrogen atmosphere10.1016/j.powtec.2024.119625 ↗
34. Interface behavior and oxidation consolidation mechanism of titanium-bearing iron sand particles with ball-milling pretreatment10.1016/j.powtec.2021.11.008 ↗
35. Influence of ball‐milling on the oxidation behavior of Ag–Zn alloy powders10.1002/maco.200905334 ↗
36. Facile synthesis of MoO3/carbon nanobelts as high-performance anode material for lithium-ion batteries10.1016/j.electacta.2015.09.042 ↗
37. Raman microspectroscopy characterization of carbon blacks: spectral analysis and structural information10.1016/j.carbon.2014.12.030 ↗
38. Structural properties of Li2CO3–BaCO3 system derived from IR and raman spectroscopy10.1016/S0022-2860(01)00703-7 ↗
39. On the formation of lithium oxides and carbonates on Li metal electrodes in comparison to LiCoO2 surface phases investigated by photoelectron spectroscopy10.1016/j.apsusc.2008.07.196 ↗
40. Raman spectroscopy of molybdenum oxides. Part II. Resonance raman spectroscopic characterization of the molybdenum oxides Mo4O11 and MoO210.1039/b107046k ↗
41. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and raman and infrared spectroscopy10.1021/jp303096m ↗
42. Characterization of batteries by electrochemical impedance spectroscopy10.1016/j.egyr.2020.03.029 ↗