Experimental solid particle erosion of silicon nitride: Optical investigation
Source abstract
Abstract
Abstract An experimental solid particle erosion study was conducted to investigate the erosion of silicon nitride at different angles of attack using optical techniques. During the erosion process, it has been noticed that when silicon carbide abrasive particles came into contact with the target material, a shower of sparks was created due to the high heat generated causing localized melting on the surface of the abrasive particles. Shadow Moire, an inexpensive and easy-to-setup technique, was then used to estimate the depth, width, and circularity of the erosion scars. The same parameters were also measured using a non-contact optical profilometer to evaluate the accuracy of shadow moire technique. A good agreement has been observed where the shadow moire technique was capable of estimating the circularity, maximum depth, and the width to depth ratio of the erosion scars with a maximum error of 15%, 16%, and 12%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Particle Dynamics in Fluid Flows · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
2. Erosion characteristics of silicon nitride ceramics10.1016/S0272-8842(02)00222-5 ↗
3. Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride10.1007/BF01161167 ↗
4. Hu · 1994
5. Carter · 2007
6. “Silicon nitride as a rolling bearing material—a preliminary assessment10.1016/0043-1648(71)90015-9 ↗
7. Aramaki · 1988
8. Silicon nitride rolling bearings for extreme operating conditions10.1080/05698198208983110 ↗
9. The effects of impact angles of jet stream in the abrasive water jet cutting of Si3N4 ceramics10.2109/jcersj.101.1297 ↗
10. Impact damage in brittle materials in the elastic-plastic response regime
11. Erosion damage in structural ceramics10.1016/0025-5416(85)90230-7 ↗
12. Effect of erodent hardness on erosion of brittle materials10.1016/0043-1648(88)90180-9 ↗
13. Some reflections on the past and future of erosion10.1016/0043-1648(95)07188-1 ↗
14. A closer look at the ductile-brittle transition in solid particle erosion10.1016/S0043-1648(02)00223-5 ↗
15. Erosion of surfaces by solid particles10.1016/0043-1648(60)90055-7 ↗
16. Some observations on the erosion of ductile metals10.1016/0043-1648(72)90444-9 ↗
17. A study of erosion phenomena Part I10.1016/0043-1648(63)90003-6 ↗
18. A study of erosion phenomena Part II10.1016/0043-1648(63)90073-5 ↗
19. Prediction of machined surface evolution in the abrasive jet micro-machining of metals10.1016/j.wear.2012.05.029 ↗
20. Numerical and experimental analysis of particle fracture during solid particle erosion, part I: modeling and experimental verification10.1016/j.wear.2016.03.008 ↗
21. Numerical and experimental analysis of particle fracture during solid particle erosion, Part II: effect of incident angle, velocity and abrasive size10.1016/j.wear.2016.03.009 ↗
22. Surface roughness and erosion rate of abrasive jet micro-machined channels: experiments and analytical model10.1016/j.wear.2013.03.005 ↗
23. On the predictive modelling of machined surface topography in abrasive air jet polishing of quartz glass10.1016/j.ijmecsci.2018.12.041 ↗
24. Wear models and predictive equations: their form and content10.1016/0043-1648(95)90158-2 ↗
25. A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications10.1016/j.jngse.2014.10.001 ↗
26. Solid particle erosion
27. Generation of surface contours by moiré patterns10.1364/AO.9.000942 ↗
28. Shape measurements on large surfaces by fringe projection10.1111/j.1747-1567.1999.tb01552.x ↗
29. A moiré micro strain gauge10.1016/j.optcom.2011.12.006 ↗
30. Calibration of the high sensitivity shadow moiré system using random phase-shifting technique10.1016/j.optlaseng.2014.05.011 ↗
31. 3D face recognition by shadow moiré10.1016/j.optlastec.2011.06.009 ↗
32. Moiré as a low-cost, robust, optical-technique to quantify soil surface condition10.1016/j.still.2015.12.013 ↗
33. Shadow moire contouring of impact craters10.1117/12.7972960 ↗
34. Industrial Airbrasive Unit Model F Service Manual, S. S. White Co.”.
35. “Wear of bulk ceramics in micro-scale abrasion—the role of abrasive shape and hardness and its relevance to testing of ceramic coatings10.1016/j.wear.2006.11.028 ↗
36. Abrasive wear of structural ceramics
37. Wear by hard particles10.1016/S0301-679X(98)00079-6 ↗