journal article·2024-12Open access

Lightweight alkali activated composites by direct foaming based on ceramic tile waste and fly ash

Giulia Masi, Alessandro Tugnoli, Maria Chiara Bignozzi

Ceramics International· Volume 50· Issue 24

Abstract

This study aims at investigating for the first time if ceramic waste coming from the rectifying process of porcelain stoneware tiles are suitable to prepare alkali activated lightweight composites. After successfully designing alkali activated materials based on ceramic waste, different foaming agents were added alone or in combination with sodium dodecyl sulfate acting as pore stabilizing agent. Addition of expanded perlite as lightweight constituent was also tested. Different properties, such as geometric density, water absorption, porosity and pore size distribution by mercury intrusion porosimetry and SEM observations, and thermal conductivity, were measured in view of their potential future applications. The results highlight that combining ceramic tile waste as raw materials, hydrogen peroxide as foaming agent, sodium dodecyl sulfate as pore stabilizing agent and expanded perlite allow the preparation of optimized lightweight composites with a density of 0.75 g/cm 3 , a water absorption greater than 70 % and a thermal conductivity of 0.26 W/mK.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Management and valorisation of wastes through use in producing alkali-activated cement materials10.1002/jctb.4927 ↗
2. Eco-friendly geopolymer prepared from solid wastes: a critical review10.1016/j.chemosphere.2020.128900 ↗
3. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
4. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
5. Recycling of ceramic tile waste into construction materials
6. Use of waste ceramics to produce sustainable concrete: a review
7. Alkaline activation of ceramic waste materials10.1007/s12649-013-9197-z ↗
8. Construction and demolition waste management - a holistic evaluation of environmental performance10.1016/j.jclepro.2015.02.073 ↗
9. Properties and microstructure of alkali-activated red clay brick waste10.1016/j.conbuildmat.2013.01.031 ↗
10. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer10.1016/j.compositesb.2017.10.013 ↗
11. Alternative cements based on alkali-activated red clay brick waste10.1016/j.conbuildmat.2016.10.023 ↗
12. Valorization of brick waste by alkali-activation: a study on the possible use for masonry repointing10.1016/j.ceramint.2016.06.093 ↗
13. Suitability of ceramic industrial waste recycling by alkaline activation for use as construction and restoration materials
14. Potential of green ceramics waste for alkali activated foams10.3390/ma12213563 ↗
15. Sustainable environment approach by the usage of ceramic pottery waste in geopolymer mortar10.1007/s13762-023-04939-0 ↗
16. High-temperature behaviour of alkali-activated composites based on fly ash and recycled refractory particles
17. Performance of refractory aluminosilicate particle/fiber-reinforced geopolymer composites10.1016/j.compositesb.2012.02.027 ↗
18. Utilization of various ceramic waste as fine aggregate replacement into fly ash-based geopolymer10.1016/j.matlet.2023.135651 ↗
19. Assessment of the suitability of ceramic waste in geopolymer composites: an appraisal10.3390/ma14123279 ↗
20. Sustainability in Italian ceramic tile production: evaluation of the environmental impact
21. Recycling insight into the ceramic tile manufacturing industry
22. World production and consumption of ceramic tiles
23. A comparative review on foam-based versus lightweight aggregate-based alkali-activated materials and geopolymer10.1007/s41062-021-00595-w ↗
24. Preparation, properties and applications of fly ash-based porous geopolymers: a review10.1016/j.jclepro.2022.132043 ↗
25. A state-of-the-art review on geopolymer foam concrete with solid waste materials: components, characteristics, and microstructure10.1007/s41062-023-01202-w ↗
26. Geopolymer foams: an overview of recent advancements10.1016/j.pmatsci.2019.100621 ↗
27. Processing, properties and applications of highly porous geopolymers: a review10.1016/j.ceramint.2018.05.219 ↗
28. Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates10.1016/j.ceramint.2013.02.104 ↗
29. Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements10.1016/j.jeurceramsoc.2011.12.030 ↗
30. A comparison between different foaming methods for the synthesis of light weight geopolymers10.1016/j.ceramint.2014.05.108 ↗
31. The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers10.1016/j.compositesb.2015.02.023 ↗
32. Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
33. Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications10.1080/19648189.2015.1125392 ↗
34. Inorganic foams made from alkali-activated fly ash: mechanical, chemical and physical properties10.1016/j.jeurceramsoc.2014.08.024 ↗
35. Preparation and stability of inorganic solidified foam for preventing coal fires10.1155/2014/347386 ↗
36. The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams10.1016/j.cemconcomp.2017.03.010 ↗
37. Analysis of the foam generated using surfactant sodium lauryl sulfate10.4334/IJCSM.2010.4.1.055 ↗
38. Alkali activated lightweight mortars for passive fire protection: a preliminary study10.1016/j.conbuildmat.2018.11.005 ↗
39. Acoustic emission study of heat-induced cracking in fly ash-based alkali-activated pastes and lightweight mortars10.1016/j.cemconcomp.2019.04.013 ↗
40. Novel alkali-activated materials with photocatalytic and bactericidal properties based on ceramic tile waste10.3390/coatings12010035 ↗
41. Reusing ceramic waste as a precursor in alkali-activated cements: a review
42. Creating mortars through the alkaline activation of ceramic waste from construction: case studies on their applicability and versatility in conservation10.3390/su16031085 ↗
43. Addition of ceramic waste for the preparation of VA-based alkali-activated material with high temperature resistance
44. A 14-year study on ceramic waste slag-based lightweight aggregate concrete10.1016/j.conbuildmat.2022.127152 ↗
45. Effect of cure temperature on the formation of metakaolinite-based geopolymer10.1016/j.ceramint.2015.02.022 ↗
46. The effect of curing regimes on physico-mechanical, microstructural and durability properties of alkali-activated materials: a review10.1016/j.conbuildmat.2022.126335 ↗
47. Room temperature alkali activation of fly ash: the effect of Na2O/SiO2 ratio10.1016/j.conbuildmat.2014.07.062 ↗
48. Steel corrosion behavior in light weight fly-ash based Alkali activated mortars
49. Fly ash-based one-part alkali activated mortars cured at room temperature: effect of precursor pre-treatments
50. Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications10.1016/j.msea.2011.01.005 ↗
51. Contribution to the expansion of low density polyethylene by the use of chemical blowing agents based on sodium bicarbonate and/or citric acid10.1134/S0965545X21050059 ↗
52. Dsc studies on the decomposition of chemical blowing agents based on citric acid and sodium bicarbonate10.1016/j.tca.2017.11.007 ↗
53. EN 1015-3:1999 Methods of test for mortar for masonry. Determination of Consistence of Fresh Mortar (By Flow Table).
54. Synthesis and properties of inorganic polymers (geopolymers) derived from Cameroon-meta-halloysite10.1016/j.ceramint.2018.07.070 ↗
55. 2016
56. 2015
57. On the use of transient plane source sensors for studying materials with direction dependent properties
58. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials10.1063/1.1142087 ↗
59. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
60. The role of particle technology in developing sustainable construction materials10.1016/j.apt.2009.10.006 ↗
61. Thermal properties and steel corrosion in light-weight alkali activated mortars