Effect of calcination temperature on the synthesis of Ni-based cerium zirconate for dry reforming of methane
Source abstract
Abstract
Dry reforming of methane (DRM) represents an alluring approach to the direct conversion of CO2 and CH4, gases with the highest global warming potential, into syngas, a value-added intermediate used in chemical industry. In this study, mixed oxide structures of cerium and zirconium doped with 10 wt% Ni were used due to the high thermal stability. This study showcased the importance of choosing suitable conditions and explored the impact of calcination temperature on Ce–Zr mixed oxides with Ni. XRD analysis confirmed the existence of different crystalline phases according to the calcination temperature. Redox characterisation showed a trade-off among calcination temperature, the dispersion of Ni clusters and its interaction with the support structure. Calcined catalysts at 900 and 1000 °C underwent harsh, long-term DRM conditions. Despite the low surface area of the designed catalysts, the stability experiments proved a relation between dispersion of Ni active phase and catalytic performance, showing an optimum calcination temperature of 1000 °C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Catalysts for Methane Reforming · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. 2015
2. 2022
3. Valorization of greenhouse carbon dioxide emissions into value-added products by catalytic processes10.1016/j.jcou.2013.10.004 ↗
4. Sustainable routes for acetic acid production: traditional processes vs a low-carbon, biogas-based strategy10.1016/j.scitotenv.2022.156663 ↗
5. A review on dry reforming of methane in aspect of catalytic properties10.1016/j.cattod.2018.07.032 ↗
6. Carbon dioxide reforming of methane to produce synthesis gas over metal-supported catalysts: state of the art10.1021/ef950227t ↗
7. A review on the different aspects and challenges of the dry reforming of methane (DRM) reaction10.3390/nano12193400 ↗
8. Thermodynamic analysis of carbon dioxide reforming of methane in view of solid carbon formation10.1016/j.fuproc.2010.11.027 ↗
9. Analysis of Dry Reforming as direct route for gas phase CO2 conversion. The past, the present and future of catalytic DRM technologies10.1016/j.pecs.2021.100970 ↗
10. A review of dry (CO 2) reforming of methane over noble metal catalysts10.1039/C3CS60395D ↗
11. Dry reforming of methane: influence of process parameters—a review10.1016/j.rser.2015.02.026 ↗
12. Review on dry reforming of methane, a potentially more environmentally-friendly approach to the increasing natural gas exploitation10.3389/fchem.2014.00081 ↗
13. A2B2O7 pyrochlore compounds: a category of potential materials for clean energy and environment protection catalysis10.1016/j.jre.2020.01.002 ↗
14. A critical review of existing criteria for the prediction of pyrochlore formation and stability10.1021/acs.inorgchem.8b01665 ↗
15. Ni stabilised on inorganic complex structures: superior catalysts for chemical CO2 recycling via dry reforming of methane10.1016/j.apcatb.2018.05.051 ↗
16. Flexible syngas production using a La2Zr2-xNixO7-δ pyrochlore-double perovskite catalyst: towards a direct route for gas phase CO2 recycling10.1016/j.cattod.2019.05.039 ↗
17. In situ study of low-temperature dry reforming of methane over La2Ce2O7 and LaNiO3 mixed oxides10.1016/j.apcatb.2022.121528 ↗
18. Phase transformation of Zr-modified LaNiO3 perovskite materials: effect of CO2 reforming of methane to syngas10.3390/catal14010091 ↗
19. Design of Ni‐substituted La 2 (CeZrNi) 2 O 7 pyrochlore catalysts for methane dry reforming10.1002/cnma.202100422 ↗
20. Nickel-based cerium zirconate inorganic complex structures for CO2 valorisation via dry reforming of methane
21. Pechini · 1967
22. High-temperature superconductor materials for contact layers in solid oxide fuel cells: I. Sintering behavior and physical properties at operating temperatures10.1016/S1359-6454(00)00385-2 ↗
23. Rh, Ni, and Ca substituted pyrochlore catalysts for dry reforming of methane10.1016/j.apcata.2011.06.025 ↗
24. Methane reforming over Ni-based pyrochlore catalyst: deactivation studies for different reactions10.1007/s13203-016-0166-x ↗
25. Dry reforming of methane over Ni/SiO2 catalysts: role of support structure properties10.1016/j.fuel.2023.127490 ↗
26. Methane dry reforming over Ni catalysts supported on Ce–Zr oxides prepared by a route involving supercritical fluids10.1515/chem-2017-0046 ↗
27. Modification of the redox behaviour of CeO2 induced by structural doping with ZrO210.1006/jcat.1996.0373 ↗
28. Embedded Ni nanoparticles in CeZrO2 as stable catalyst for dry reforming of methane10.1016/j.apcatb.2019.118387 ↗
29. A new alumina-supported, not pyrophoric Raney-type Ni-catalyst10.1016/S0926-860X(99)00267-7 ↗
30. Ni stabilised on inorganic complex structures: superior catalysts for chemical CO2 recycling via dry reforming of methane10.1016/j.apcatb.2018.05.051 ↗
31. Combination of dry reforming and partial oxidation of methane on NiO–MgO–ZrO2 catalyst: effect of nickel content10.1016/j.fuproc.2012.08.004 ↗
32. Methane reforming over Ni/Ce-ZrO2 catalysts: effect of nickel content10.1016/S0926-860X(01)00883-3 ↗
33. α-Alumina-Supported nickel catalysts prepared from nickel acetylacetonate: a TPR study10.1006/jcat.1997.1931 ↗
34. Role of surface Ni and Ce species of Ni/CeO2 catalyst in CO2 methanation10.1016/j.apsusc.2016.04.180 ↗
35. Hydrogen production by oxidative steam reforming of methanol over Ni/CeO2–ZrO2 catalysts10.1016/j.ijhydene.2011.02.064 ↗
36. Coke-resistant Ni/CeZrO2 catalysts for dry reforming of methane to produce hydrogen-rich syngas10.3390/nano12091556 ↗
37. Influence of drying temperature on properties of Ni-MgO catalysts10.1016/S0167-2738(96)00573-5 ↗
38. The oxidative chemistry of methane over supported nickel catalysts10.1016/S0920-5861(98)00336-8 ↗
39. Catalytic upgrading of a biogas model mixture via low temperature DRM using multicomponent catalysts10.1007/s11244-019-01216-8 ↗
40. Study of CeO2 XPS spectra by factor analysis: reduction of CeO210.1016/S0169-4332(99)00577-2 ↗
41. One-step synthesis of nanostructured Pd-doped mixed oxides MO -CeO2 (M = Mn, Fe, Co, Ni, Cu) for efficient CO and C3H8 total oxidation10.1016/j.apcatb.2008.08.017 ↗
42. Engineering the epitaxial interface of Pt-CeO2 by surface redox reaction guided nucleation for low temperature CO oxidation10.1016/j.jmst.2019.08.036 ↗
43. Ni/CexZr1-xO2 catalyst prepared via one-step co-precipitation for CO2 reforming of CH4 to produce syngas: role of oxygen storage capacity (OSC) and oxygen vacancy formation energy (OVFE)10.1007/s10853-021-06720-5 ↗
44. Engineering exsolved catalysts for CO2 conversion10.3389/fenrg.2023.1150000 ↗
45. Versatile Ni-Ru catalysts for gas phase CO2 conversion: bringing closer dry reforming, reverse water gas shift and methanation to enable end-products flexibility10.1016/j.fuel.2021.123097 ↗
46. DFT studies of dry reforming of methane on Ni catalyst10.1016/j.cattod.2009.08.022 ↗
47. Dry (CO 2) reforming of methane over Pt catalysts studied by DFT and kinetic modeling10.1016/j.apsusc.2016.01.212 ↗
48. Switchable catalysts for chemical CO 2 recycling: a step forward in the methanation and reverse water–gas shift reactions10.1021/acssuschemeng.0c00551 ↗
49. CO2 reforming of CH410.1081/CR-100101948 ↗
50. Effects of Zr doping into ceria for the dry reforming of methane over Ni/CeZrO 2 catalysts: in situ studies with XRD, XAFS, and AP-XPS10.1021/acscatal.9b04451 ↗
51. Evaluation of kinetic models for Fischer–Tropsch cobalt catalysts in a plug flow reactor10.1016/j.cherd.2016.08.026 ↗