Microstructure, mechanical properties, and corrosion resistance of Mo2(Fe,Ni)B2-based cermets prepared by reaction boronizing sintering
Source abstract
Abstract
Abstract Mo2(Fe,Ni)B2-based cermets were successfully prepared by reaction boronizing sintering strategy, and their phase transformation, microstructure evolution, mechanical properties, and corrosion resistance were investigated. Mo2(Fe,Ni)B2 was formed by the reaction between (Fe,Ni)2B and Mo during solid-phase sintering. In the temperature range of 1010–1270 °C, extremely rapid densification occurred, and nearly full densification was obtained at the sintering temperature of 1270 °C. Mo2(Fe,Ni)B2-based cermets demonstrated superior mechanical properties with transverse rupture strength of 2140 ± 35 MPa, Rockwell hardness of 83.9 ± 0.1 HRA, and fracture toughness of 22.5 ± 0.6 MPa m1/2. Moreover, corrosion current density of Mo2(Fe,Ni)B2-based cermets was about four orders of magnitude lower than that of Mo2FeB2-based cermets, which indicates excellent corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Development and application of high strength ternary boride base cermets10.1016/j.jssc.2006.01.023 ↗
2. High tough boride base cermets produced by reaction sintering10.1016/S0254-0584(00)00442-9 ↗
3. High-strength boride base hard materials10.1006/jssc.1997.7449 ↗
4. Synthesis, microstructure evolution, and phase transformation of novel MoCoB–Co cermets10.1016/j.ceramint.2019.11.253 ↗
5. Effect of Ni content on the microstructure, mechanical properties and erosive wear of Mo2NiB2-Ni cermets10.1016/j.ceramint.2019.06.221 ↗
6. High-temperature compressive properties and tribological behaviour of Mo2NiB2-Ni cermets10.1016/j.ceramint.2019.06.058 ↗
7. New multiple-boride base hard alloy
8. Effects of Cr on the microstructure and mechanical properties of WCoB base hard alloys10.2497/jjspm.40.38 ↗
9. The effect of composition and microstructure on hardness and toughness of Mo2FeB2 based cermets10.1016/j.msea.2019.138117 ↗
10. Reactive synthesis and mechanical properties of Mo2NiB2 based hard alloy10.1016/j.ijrmhm.2009.11.002 ↗
11. Preparation of Mo2FeB2-based cermets with a core/rim structure by multi-step sintering approach10.1016/j.ceramint.2019.07.117 ↗
12. An effective way to solve the abnormal oxidation behavior of Fe in Ti(C,N)-304ss cermet10.1016/j.corsci.2019.04.033 ↗
13. Corrosion properties of Co-based cemented carbides in acidic solutions10.1016/S0263-4368(03)00027-1 ↗
14. Effects of Cr3C2 addition on the corrosion behavior of Ti(C,N)-based cermets10.1016/j.ijrmhm.2011.10.013 ↗
15. TEM and ToF-SIMS studies on the corrosion behavior of vanadium and chromium containing WC-Co hard metals in alkaline solutions10.1016/j.ijrmhm.2011.01.008 ↗
16. Slurry erosion-corrosion wear behavior in SiC-containing NaOH solutions of Mo2NiB2 cermets prepared by reactive sintering10.1016/j.ijrmhm.2018.09.017 ↗
17. Indention fracture of WC-Co cermets10.1007/BF00555296 ↗
18. Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases10.1016/j.jallcom.2013.01.046 ↗
19. Comparative investigation on the stability, electronic structures and mechanical properties of Mo2FeB2 and Mo2NiB2 ternary borides by firstprinciples calculations, Result
20. Influence of doping concentration on mechanical properties of Mo2FeB2 alloyed with Cr and Ni from first-principle calculations10.1016/j.commatsci.2018.01.027 ↗
21. Nano-casting technique to prepare polyaniline surface with biomimetic superhydrophobic structures for anticorrosion application10.1016/j.electacta.2013.02.016 ↗
22. Biocompatibility, corrosion resistance and antibacterial activity of TiO2/CuO coating on titanium10.1016/j.ceramint.2017.08.196 ↗
23. Etching and heating treatment combined approach for superhydrophobic surface on brass substrates and the consequent corrosion resistance10.1016/j.corsci.2015.10.013 ↗
24. Fabrication and corrosion resistance of a graphene-tin oxide composite film on aluminum alloy 606110.1016/j.corsci.2017.10.031 ↗
25. The electrochemical behavior of nanocomposite organic coating based on clay nanotubes filled with green corrosion inhibitor through a vacuum-assisted procedure10.1016/j.compositesb.2019.04.019 ↗
26. The roles of Ti particles in improving the corrosion resistance of electrochemically assembled Ni-Ti composite coatings10.5006/2408 ↗