Phase equilibria of SiO2–Al2O3–Fe3O4-5 wt.% CaO system at 1400 °C in air relevant to the production of continuous basalt fibers: Emphasis on spinel solid solution phase
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Study of high tensile strength of natural continuous basalt fibers10.1080/15440478.2018.1477087 ↗
2. Research progress on properties of basalt fiber-reinforced cement concrete
3. Preparation and characterization of continuous basalt fibre with high tensile strength10.1016/j.ceramint.2021.01.097 ↗
4. A review on basalt fiber composites and their applications in clean energy sector and power grids10.3390/polym14122376 ↗
5. Effect of washer size and tightening torque on bearing performance of basalt fiber composite bolted joints10.1080/15440478.2021.1902898 ↗
6. Study on the mechanism of bond strength generation and debonding failure between basalt fiber and asphalt based on molecular dynamics
7. Prediction of tensile strength of basalt continuous fiber from chemical composition using machine learning models10.1002/pc.27585 ↗
8. Performance attenuation and mechanism of basalt-fibre-reinforced concrete under fatigue load and freeze–thaw cycles10.1080/10298436.2022.2032700 ↗
9. Investigation on interfacial behavior of modified basalt textile reinforced concrete using acoustic emission technique10.1080/15440478.2021.2002768 ↗
10. Correlation of the chemical composition, structure and mechanical properties of basalt continuous fibers10.3934/matersci.2019.5.806 ↗
11. A green material from rock: basalt fiber-a review10.1080/00405000.2015.1071940 ↗
12. Chemical composition and mechanical properties of basalt and glass fibers: a comparison, Text
13. Voluminous granitic magmas from common basaltic sources10.1007/s00410-004-0632-9 ↗
14. Wu · 2020 · 433
15. Basalt fibers
16. Stable and metastable equilibria in the system SiO2-Al2O310.1111/j.1151-2916.1975.tb18770.x ↗
17. Alumina‐silica phase diagram in the mollite region10.1111/j.1151-2916.1987.tb04875.x ↗
18. Phase equilibria and thermodynamics in the Al2O3-SiO2 system—modeling of mullite and liquid10.1111/j.1551-2916.2005.00440.x ↗
19. Critical thermodynamic evaluation of oxide systems relevant to fuel ashes and slags. Part 3: silica-alumina system10.1016/j.calphad.2007.05.004 ↗
20. Integrated experimental phase equilibria study and thermodynamic modelling of the binary ZnO-Al2O3, ZnO-SiO2, Al2O3-SiO2 and ternary ZnO-Al2O3-SiO2 systems10.1016/j.ceramint.2021.04.098 ↗
21. Molecular dynamics simulation of binary CaO-FeO, MgO-SiO2, FeO-SiO2, CaO-SiO2 and ternary CaO-FeO-SiO2 systems, Thermochimic
22. The assessment of thermodynamic parameters in the Fe-O and Fe-Si-O systems10.1016/S0016-7037(97)00256-1 ↗
23. Thermodynamic optimisation of the FeO-Fe2O3-SiO2 (Fe-O-Si) system with FactSage10.3139/146.101541 ↗
24. Experimental study of “CuO0.5”-“FeO”-SiO2 and “FeO”-SiO2 systems in equilibrium with metal at 1400-1680 °C10.1016/j.jallcom.2021.160853 ↗
25. Phase relations in the Fe-rich part of the system Fe2O3(-Fe3O4)-CaO-SiO2 at 1240-1300 °C and oxygen partial pressure of 5×10-3 atm: implications for iron ore sinter10.1179/mpm.2000.109.1.36 ↗
26. Experimental study and thermodynamic re-optimization of the FeO-Fe2O3-SiO2 system10.1007/s11669-017-0535-x ↗
27. Experimental phase equilibria studies in the FeO-Fe2O3-CaO-SiO2 system and the subsystems CaO-SiO2, FeO-Fe2O3-SiO2 in air10.1007/s11663-021-02159-w ↗
28. An assessment of the CaO-SiO2 system10.1007/BF02664198 ↗
29. Thermodynamic and phase diagram data for the CaO-SiO2 system10.1016/0364-5916(90)90041-W ↗
30. CaO-SiO2 assessment using 3rd generation CALPHAD models10.1016/j.cemconres.2023.107309 ↗
31. Ab initio-assisted assessment of the CaO-SiO2 system under pressure10.1016/j.calphad.2017.07.009 ↗
32. Low-temperature heat capacity of synthetic Fe- and Mg-cordierite: thermodynamic properties and phase relations in the system FeO-Al2O3-SiO2-(H2O)10.1127/0935-1221/2008/0020-1785 ↗
33. Equilibrium studies in the system FeO-Al2O3-SiO210.1111/j.1151-2916.1942.tb15572.x ↗
34. Phase equilibria at liquidus temperatures in the system iron oxide-Al2O3-SiO2 in air atmosphere10.1111/j.1151-2916.1957.tb12588.x ↗
35. On liquid immiscibility in the system FeO-Fe2O3-Al2O3-SiO210.2475/ajs.s5-14.84.473 ↗
36. Staurolite stability in a part of the system Fe-Al-Si-OH10.1093/petrology/9.3.467 ↗
37. Thermodynamic modelling of the system Al2O3-SiO2-CaO-FeO-Fe2O3 to predict the flux requirements for coal ash slags10.1016/S0016-2361(97)00137-3 ↗
38. Equilibrium phase relations for a SiO2-Al2O3-FeOx system at 1300 °C and 1400 °C in Air10.3390/met12060926 ↗
39. Thermodynamic optimization of the Al2O3-FeO-Fe2O3-SiO2 oxide system10.1016/j.calphad.2019.101680 ↗
40. Equilibrium phase relations of a SiO2-Al2O3-FeOx system with 10 wt % CaO addition for the production of continuous basalt fibers10.1021/acsomega.1c02287 ↗
41. Phase equilibria studies in the CaO-SiO2-Al2O3-MgO system with CaO/SiO2 ratio of 1.1010.2355/isijinternational.ISIJINT-2015-486 ↗
42. Phase equilibria in the CaO-SiO2-Al2O3-MgO system with CaO/SiO2 ratio of 1.3 relevant to iron blast furnace slags10.2355/isijinternational.ISIJINT-2015-263 ↗
43. Phase equilibrium studies of CaO-SiO2-MgO-Al2O3 system with binary basicity of 1.5 related to blast furnace slag10.1007/s11663-016-0584-2 ↗
44. Phase equilibria in the system'FeO'-CaO-SiO-AlO-MgO at different CaO/SiO ratios10.1007/s11663-017-0955-3 ↗
45. Phase equilibria in the system CaO-SiO2-Al2O3-MgO-15 and 20 wt.%“FeO” with CaO/SiO2 ratio of 1.310.2355/isijinternational.ISIJINT-2016-342 ↗
46. Phase equilibria in the system “FeO”-CaO-SiO2-Al2O3-MgO with CaO/SiO2 1.310.2355/isijinternational.ISIJINT-2016-099 ↗
47. Interpolation and extrapolation with the CALPHAD method10.1016/j.jmst.2019.05.016 ↗
48. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
49. Application of HSC chemistry software in the determination of chemical thermodynamic function by measuring electromotance
50. FactSage thermochemical software and databases-recent developments10.1016/j.calphad.2008.09.009 ↗
51. MTDATA-thermodynamic and phase equilibrium software from the national physical laboratory10.1016/S0364-5916(02)00036-6 ↗
52. Experimental investigation and optimization of thermodynamic properties and phase diagrams in the systems CaO-SiO2, MgO-SiO2, CaMgSi2O6-SiO2 and CaMgSi2O6-Mg2SiO4 to 1.0 GPa10.1093/petrology/egi037 ↗
53. Critical evaluation and optimization of the thermodynamic properties and phase diagrams of the CaO-Al2O3, Al2O3-SiO2, and CaO-Al2O3-SiO2 systems10.1007/BF02663141 ↗
54. Phase equilibria of MgO-Al2O3-TiO2 system at 1600 °C in air: Emphasis on pseudobrookite and spinel solid solution phases10.1111/jace.18642 ↗
55. 1700 °C isothermal phase diagram of the MgO-Al2O3-TiO2 system in air related to pseudobrookite and spinel ceramics10.1007/s11837-022-05531-6 ↗
56. The effect of 15 wt.% Al2O3 addition on the equilibrium phase relations of CaO-SiO2-TiO2 system at 1400 °C in air10.1016/j.ceramint.2021.05.205 ↗