Enhanced corrosion resistance of a novel periodic multilayered Si/(Si, N)-DLC coating against simulated coal mine water
Source abstract
Abstract
In this study, a novel periodic multilayered DLC coating, which was composed of a Si interlayer and a Si/N co-incorporated DLC layer (Si/(Si, N)-DLC) per period, was deposited; the corrosion behavior under the neutral, acidic, or alkaline coal mine water environment and its periodic number dependence, especially the fundamental corrosion mechanism , were systemically explored. Results suggest that compare to the substrate, the introduction of multilayered Si/(Si, N)-DLC coating presents a dramatic enhancement in the corrosion resistance under coal mine water environment. However, with increasing the periodic number, the corrosion resistance of the multilayered coating strongly depends on the working environment, which exhibits an enhancement in neutral and alkaline environments while a degeneration in acidic environment. This is attributed to not only the prolongation of the corrosion path caused by the multilayered structure but also the formation of an insulating silicon oxide layer in neutral and alkaline environments. However, in acidic environments, the strong permeability of H + with the smallest ionic radius easily infiltrates the inherent defects of the coating. This not only weakens the protective properties of the multilayer structure but also leads to hydrogen-induced cracking, ultimately diminishing corrosion resistance. These findings theoretically guide the development of the DLC coatings with excellent corrosion resistance for coal mine applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Tribocorrosion performance of medium-manganese austenitic wear-resistant steel in simulated mine water10.1016/j.corsci.2023.111225 ↗
2. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
3. Microstructure, mechanical, and electrochemical properties of Si/DLC coating deposited on 2024-T3 Al alloy10.1016/j.jallcom.2023.171452 ↗
4. Influence of positive pulse voltages on structure, mechanical, and corrosion inhibition characteristics of Si/DLC coatings10.1016/j.surfcoat.2022.128749 ↗
5. Design of low-friction and anti-corrosion a-C:H:SiOx films10.1016/j.diamond.2021.108512 ↗
6. Understanding the effect of Al/Ti ratio on the tribocorrosion performance of Al/Ti co-doped diamond-like carbon films for marine applications10.1016/j.surfcoat.2020.126347 ↗
7. Corrosion behavior of diamond-like carbon film induced by Al/Ti co-doping10.1016/j.apsusc.2019.144877 ↗
8. Effects of silicon doping on the chemical bonding states and properties of nitrogen-doped diamond-like carbon films by plasma-enhanced chemical vapor deposition10.1016/j.tsf.2021.138923 ↗
9. High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings10.1016/j.triboint.2022.107845 ↗
10. Effects of source gases on the properties of silicon/nitrogen-incorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition10.1016/j.tsf.2017.05.046 ↗
11. Effects of pulse bias on structure and properties of silicon/nitrogen-incorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition10.1016/j.apsusc.2012.10.082 ↗
12. Tribological properties and thermal stability of hydrogenated, silicon/nitrogen-coincorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition10.7567/JJAP.55.125501 ↗
13. Microstructure and tribological behavior of self-lubricating (Si:N)-DLC/MAO coatings on AZ80 magnesium substrate10.1007/s40195-013-0265-y ↗
14. Microstructure, adhesion, in vitro corrosion resistance and tribological behavior of (Si:N)-DLC coated pure Ti10.1016/j.diamond.2018.12.027 ↗
15. Structure and properties of Si and N co-doping on DLC film corrosion resistance10.1016/j.ceramint.2022.09.178 ↗
16. Si and N incorporated hydrogenated diamond like carbon film with excellent performance for marine corrosion resistance10.1016/j.ceramint.2021.12.052 ↗
17. Insight into the corrosion behaviors and mechanism of the self-healing Si/N-DLC films in oilfield environment10.1016/j.corsci.2024.111989 ↗
18. High-temperature tribological properties of diamond-like carbon films
19. A first principles and experimental study on the influence of nitrogen doping on the performance of amorphous carbon films for proton exchange membrane fuel cells10.1016/j.carbon.2020.05.082 ↗
20. The effect of acetylene flow rate on the uniform deposition of thick DLC coatings on the inner surface of pipes with different draw ratios10.1016/j.vacuum.2021.110720 ↗
21. Interface architecture for superthick carbon-based films toward low internal stress and ultrahigh load-bearing capacity10.1021/am400778p ↗
22. The influence of different silicon adhesion interlayers on the tribological behavior of DLC thin films deposited on steel by EC-PECVD10.1016/j.surfcoat.2015.10.031 ↗
23. Enhancing the adhesion of diamond-like carbon films to steel substrates using silicon-containing interlayers10.1016/j.surfcoat.2018.06.055 ↗
24. Effect of bias voltage on characteristics of multilayer Si-DLC film coated on AA6061 aluminum alloy10.1007/s11665-020-05397-2 ↗
25. The effects of Si incorporation on the electrochemical and nanomechanical properties of DLC thin films10.1016/S0925-9635(01)00656-2 ↗
26. Effect of dopants (F, Si) material on the structure and properties of hydrogenated DLC film by plane cathode PECVD10.1016/j.diamond.2020.108102 ↗
27. Fretting wear behaviors of steel wires in coal mine under different corrosive mediums10.1016/j.wear.2011.03.028 ↗
28. The influence of substrate bias voltages on structure, mechanical properties and anti-corrosion performance of Cr doped diamond-like carbon films deposited by steered cathodic arc evaporation10.1016/j.tsf.2015.11.010 ↗
29. Characterization and analysis of DLC films with different thickness deposited by RF magnetron PECVD10.1007/s12598-012-0491-x ↗
30. Growth and nucleation of diamond-like carbon (DLC) film on aluminum10.1016/S0168-583X(03)00827-9 ↗
31. Diamond-like carbon coatings: AFM and ellipsometric studies10.1016/S0257-8972(03)00876-4 ↗
32. Surface roughness of diamond-like carbon films prepared using various techniques10.1016/S0257-8972(00)01139-7 ↗
33. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
34. Determination of bonding in diamond-like carbon by Raman spectroscopy10.1016/S0925-9635(01)00730-0 ↗
35. Raman spectroscopy of hydrogenated amorphous carbons10.1103/PhysRevB.72.085401 ↗
36. Bonding in hydrogenated diamond-like carbon by Raman spectroscopy10.1016/j.diamond.2004.10.030 ↗
37. Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications10.1016/j.apsusc.2017.03.223 ↗
38. Influence of the process parameters on the characteristics of silicon-incorporated a-C:H:SiOx coatings10.1016/j.surfcoat.2014.12.073 ↗
39. Fabrication of DLC thin films with improved diamond-like carbon character by the application of external magnetic field10.1016/j.carbon.2015.06.081 ↗
40. High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings10.1016/j.triboint.2022.107845 ↗
41. Nitrogen doping for adhesion improvement of DLC film deposited on Si substrate by Filtered Cathodic Vacuum Arc (FCVA) technique10.1016/j.apsusc.2014.03.059 ↗
42. Investigation of structure, adhesion strength, wear performance and corrosion behavior of platinum/ruthenium/nitrogen doped diamond-like carbon thin films with respect to film thickness10.1016/j.matchemphys.2010.11.036 ↗
43. Effects of nitrogen incorporation on N-doped DLC thin film electrodes fabricated by dielectric barrier discharge plasma: structural evolution and electrochemical performances10.1016/j.jallcom.2020.157298 ↗
44. Structure evolution from nanocolumns to nanoporous of nitrogen doped amorphous carbon films deposited by magnetron sputtering10.1016/j.apsusc.2010.04.002 ↗
45. High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework10.1038/ncomms6261 ↗
46. Long-term tribocorrosion resistance and failure tolerance of multilayer carbon-based coatings10.1007/s40544-021-0559-4 ↗
47. Influence of the carbon content on the corrosion and tribocorrosion performance of Ti-DLC coatings for biomedical alloys10.1016/j.triboint.2015.03.007 ↗
48. Superhydrophobic double-layer coating for efficient heat dissipation and corrosion protection10.1016/j.cej.2019.01.086 ↗
49. Electrochemical corrosion monitoring of galvanized steel under cyclic wet-dry conditions10.1016/S0010-938X(99)00057-8 ↗
50. Equivalent circuit for modelling the steel-concrete interface. II. Complications in applying the Stern-Geary equation to corrosion rate determinations10.1016/S0010-938X(98)00037-7 ↗
51. Passivation and corrosion behaviours of cobalt and cobalt-chromium-molybdenum alloy10.1016/j.corsci.2007.03.023 ↗
52. Corrosion and tribocorrosion performance of multilayer diamond-like carbon film in NaCl solution10.1039/C5RA21207C ↗
53. Studies of water transport behavior and impedance models of epoxy-coated metals in NaCl solution by EIS10.1016/j.porgcoat.2004.08.001 ↗
54. Tailoring hardness and electrochemical performance of TC4 coated Cu/a-C thin coating with introducing second metal Zr10.1016/j.corsci.2020.108713 ↗
55. Corrosion of mild steel in hydrochloric acid solution in the presence of two cationic gemini surfactants with and without hydroxyl substituted spacers10.1016/j.corsci.2018.03.034 ↗
56. Electrochemical investigations of the corrosion protection properties of an epoxy-ester coating filled with cerium acetyl acetonate anticorrosive pigment10.1149/2.0231713jes ↗
57. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
58. Quantifying the influence of microstructure on the corrosion of Mg-Li alloys by using X-ray CT10.1016/j.corsci.2024.111848 ↗
59. Protectiveness and stability of iron carbonate films on carbon steel in mildly alkaline aqueous alkanolamine CO2 environments10.1016/j.corsci.2023.111773 ↗
60. Technical note: concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗