Effects of CeO2 doping on the mechanical, infrared radiative, and thermophysical properties of Pr2Zr2O7 ceramics for potential thermal protective coatings
Source abstract
Abstract
A series of Ce 4+ -doped Pr 2 Zr 2 O 7 ceramics were produced using a solid reaction method to utilize novel ceramic materials as potential candidates for thermally protective coatings. The effects of Ce 4+ doping on the phase composition and mechanical, infrared radiative, and thermophysical properties were studied in detail. The results indicated the good phase stability and sintering resistance of the Pr 2 (Zr 1−x Ce x ) 2 O 7 ceramics. Moreover, Ce 4+ -doped Pr 2 Zr 2 O 7 bulk materials exhibited higher infrared emissivity (0.904) at wavelengths of 3–5 μm and 1000 °C for Pr 2 (Zr 0.5 Ce 0.5 ) 2 O 7 ) owing to the introduction of impurity energy levels. Pr 2 (Zr 0.7 Ce 0.3 ) 2 O 7 exhibited an appropriate average coefficient of thermal expansion of 12.4 × 10 −6 K −1 and a low thermal conductivity of 1.14 W m −1 K −1 at 1000 °C, owing to the reduction of lattice energy and the presence of more oxygen vacancies and substitution atoms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear materials and radiation effects · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. High emissivity coatings on titanium alloy prepared by micro−arc oxidation for high temperature application10.1007/s10853-011-6017-3 ↗
2. Enhanced infrared emissivity of CeO2 coatings by La doping10.1016/j.apsusc.2013.05.034 ↗
3. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
4. Phase evolution upon aging of air plasma sprayed t’−zirconia coatings: I−microstructure evolution10.1111/j.1551-2916.2012.05460.x ↗
5. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
6. Preparation and investigation of MoSi2/SiC coating with high infrared emissivity at high temperature10.1016/j.surfcoat.2018.12.036 ↗
7. Compatibility of low thermal conductivity and high infrared emissivity of plasma-sprayed Sm2Hf2O7 and Pr2Hf2O7 coatings10.1016/j.surfcoat.2023.129312 ↗
8. Effect of high-temperature infrared emissivity on thermal cycling performance of magnetoplumbite-type thermal barrier coatings under thermal gradient condition10.1016/j.jeurceramsoc.2023.09.012 ↗
9. Doping engineering for high-temperature broadband high emissivity and low thermal conductivity of ytterbium chromate-based ceramics10.1016/j.ceramint.2024.02.255 ↗
10. Effects of doping on thermal conductivity of pyrochlore oxides for advanced thermal barrier coatings10.1016/j.msea.2007.01.069 ↗
11. Zirconates as new materials for thermal barrier coatings10.1111/j.1151-2916.2000.tb01506.x ↗
12. Synthesis, characterization and sintering of fluorite and pyrochlore−type compounds: Pr2Zr2O7, Sm2Zr2O7 and PrSmZr2O7
13. The mechanical and thermophysical properties of La2(Zr1−xCex)2O7 ceramics10.1016/j.jallcom.2015.11.092 ↗
14. Preparation and thermophysical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatings10.1016/j.jallcom.2006.08.005 ↗
15. Effects of doping Yb3+, La3+, Ti4+, Hf4+, Ce4+ cations on the mechanical properties, thermal conductivity, and electronic structures of Gd2Zr2O710.1016/j.jallcom.2018.10.240 ↗
16. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
17. A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct Crack Measurements10.1111/j.1151-2916.1981.tb10320.x ↗
18. A simple method for determining elastic modulus-to-hardness ratios using Knoop indentation measurements10.1111/j.1151-2916.1982.tb10357.x ↗
19. Compatible performance of low thermal conductivity and high infrared radiation of Sm2O3-HfO2 series ceramics applied for thermal protection coatings10.1016/j.ceramint.2021.11.180 ↗
20. Barin · 1973
21. Review of materials thermochemistry, by O. Kubaschewski, C.B. Alcock, P.J. Pergamon spencer10.1006/jcht.1994.1042 ↗
22. Thermochemical data of pure substances, parts I and II10.1016/0040-6031(93)80563-P ↗
23. Thermophysical properties of Sm2(Zr1−xCex)2O7 ceramics10.1007/s12598-009-0044-0 ↗
24. Ce incorporated pyrochlore Pr2Zr2O7 solid electrolytes for enhanced mild−temperature NO2 sensing10.1016/j.ceramint.2017.06.019 ↗
25. Ce−Pr mixed oxides as active supports for Water−gas Shift reaction: experimental and density functional theory characterization10.1016/j.apcata.2014.07.040 ↗
26. Introduction to grains, phases, and interfaces−an interpretation of microstructure
27. Gilman · 2009
28. Influence of B−site substituent Ce on thermophysical, oxygen diffusion, and mechanical properties of La2Zr2O710.1016/j.ceramint.2022.11.288 ↗
29. Low thermal conductivity of rare-earth zirconate-stannate solid solutions (Yb2Zr2O7)1–x(Ln2Sn2O7)x (Ln = Nd, Sm)10.1111/jace.13979 ↗
30. Influence of B site substituent Ti on the structure and thermophysical properties of A2B2O7-type pyrochlore Gd2Zr2O710.1016/j.actamat.2009.06.040 ↗
31. Order–disorder transition and unconventional thermal conductivities of the (Sm1–xYbx)2Zr2O7 Series10.1111/j.1551-2916.2010.04113.x ↗
32. Enhanced infrared emission property of NiCr spinel coating doped with MnO2 and rare−earth oxides10.1016/j.surfcoat.2018.03.059 ↗
33. Infrared emission properties of RE (RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) and Mn co−doped Co0.6Zn0.4Fe2O4 ferrites10.1016/j.matchemphys.2011.09.003 ↗
34. Compatibility of low thermal conductivity and high infrared emissivity of plasma−sprayed Sm2Hf2O7 and Pr2Hf2O7 coatings10.1016/j.surfcoat.2023.129312 ↗
35. Infrared radiation and thermal cyclic performance of a high−entropy rare−earth hexaaluminate coating prepared by atmospheric plasma spraying10.1016/j.ceramint.2022.05.280 ↗
36. Fabrication and investigation of Ca/Tb co−doped HfO2 infrared coatings10.1016/j.jeurceramsoc.2022.02.032 ↗
37. Thermochemical behavior and transport properties of Pr−substituted SrTiO3 as potential solid oxide fuel cell anode10.1016/j.jpowsour.2013.07.019 ↗
38. Praseodymium 3d− and 4d−core photoemission spectra of Pr2O310.1103/PhysRevB.44.5465 ↗
39. Characterization and evaluation of double perovskites LnBaCoFeO5+δ (Ln=Pr and Nd) as intermediate−temperature solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.05.187 ↗
40. The antimonide oxides REZnSbO and REMnSbO (RE=Ce, Pr) –An XPS study10.1016/j.solidstatesciences.2012.11.014 ↗
41. Ni/Ln2Zr2O7 (Ln=La, Pr, Sm and Y) catalysts for methane steam reforming: on the effects of A site replacement10.1039/C7CY00004A ↗
42. Evaluation on the microstructure and thermal infrared emissivity of Ca2+−doped ytterbium chromate coating deposited by saucer−shaped porous feedstocks for high−temperature thermal protection10.1016/j.apsusc.2022.155210 ↗
43. La2Hf2O7 ceramics as potential top−coat materials for thermal/environmental barrier coatings10.1016/j.ceramint.2019.07.235 ↗
44. Influence of Gd2O3 addition on thermophysical properties of La2Ce2O7 ceramics for thermal barrier coatings10.1016/j.jeurceramsoc.2012.06.003 ↗
45. Pyrochlore Pr2Zr2-xMxO7+δ (M = Al, Ga, In) solid-state electrolytes: defect-mediated oxygen hopping pathways and enhanced NO2 sensing properties10.1016/j.snb.2018.04.178 ↗
46. Thermal and mechanical properties of Sc2O3–CeO2 co−stabilized zirconia ceramic as promising thermal barrier coating material10.1016/j.ceramint.2021.08.184 ↗
47. Thermal expansion of MCrAlY alloys10.1016/j.surfcoat.2003.05.001 ↗
48. Tailored microstructure of zirconia and hafnia−based thermal barrier coatings with low thermal conductivity and high hemispherical reflectance by EB−PVD10.1023/B:JMSC.0000017759.50800.d7 ↗
49. The mechanical and thermophysical properties of La2(Zr1–xCex)2O7 ceramics10.1016/j.jallcom.2015.11.092 ↗
50. Effects of doping on thermal conductivity of pyrochlore oxides for advanced thermal barrier coatings10.1016/j.msea.2007.01.069 ↗