Tension-tension fatigue behaviour of 3D braided SiCf/SiC composite with film cooling holes at 1350 °C in air
Source abstract
Abstract
Abstract The tension-tension fatigue behaviour of SiCf/SiC composites with film cooling holes (FCHs) was investigated at 1350 °C in air. The number of drilled holes were 1, 5, 10 (rectangular arrangement) and 11 (triangular arrangement), and the average diameter was 0.5 mm. The fatigue stresses were 80 MPa and 120 MPa at a frequency of 3.0 Hz, and the R ratio of minimum stress to maximum stress was 0.1. The stress-strain hysteresis curve, strain accumulation and modulus decrease were investigated, and characterization of the fracture morphology and microstructure was performed to reveal the initiation and evolution of damage during fatigue cycles. The results indicated that the FCHs exhibit little effect on the ultimate tensile strength of the composites. The fatigue life decreases with an increasing number of FCHs, and the effect of the FCHs on the fatigue life gradually decreases as stress levels increase. Specimens with triangular arrangement 11-H exhibit the worst fatigue life, and the damage mechanism is significant relative to large-area of fibre oxidation on the fracture surface. The weakening effect of FCHs on the fatigue performance of the composites is mainly due to the oxidation and embrittlement of fibres around the hole, and it is significant relative to initial crack nucleation and propagation in the coating and matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Mechanical Behavior of Composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach10.1016/j.advengsoft.2014.12.007 ↗
2. Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: a review10.1016/S0266-3538(99)00014-7 ↗
3. Current status and recent research achievements in SiC/SiC composites10.1016/j.jnucmat.2014.06.003 ↗
4. Advanced ceramic matrix composite materials for current and future propulsion technology applications10.1016/j.actaastro.2004.05.052 ↗
5. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
6. Behaviour of composite plates with drilled and moulded hole under tensile load10.1016/j.compstruct.2011.03.027 ↗
7. The effect of hole defects on the oxidation behaviour of two-dimensional C/SiC composites10.1016/j.ceramint.2016.06.200 ↗
8. Wen · Int. J. Fatigue · 2018 · 111 · 24310.1016/j.ijfatigue.2018.02.020 ↗
9. Temperature dependent first matrix cracking stress model for the unidirectional fiber reinforced ceramic composites10.1016/j.jeurceramsoc.2016.12.003 ↗
10. Progressive damage simulation in 3D four-directional braided composites considering the jamming-action-induced yarn deformation10.1016/j.compstruct.2017.07.021 ↗
11. Tensile fracture behavior and strength distribution of SiCf/SiC composites with different SiBN interface thicknesses10.1016/j.ceramint.2014.09.098 ↗
12. A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites10.1016/j.compstruct.2016.12.042 ↗
13. Strength model of the matrix element in SiC/SiC composites10.1016/j.matdes.2016.03.166 ↗
14. In-situ growth of SiC nanostructures and their influence on anti-oxidation capability of C/SiC composites10.1016/j.corsci.2017.05.008 ↗
15. Modeling on temperature-dependent first matrix cracking stress for fiber reinforced ceramics considering fiber debonding and residual thermal stress10.1016/j.ceramint.2018.08.254 ↗
16. In-plane mechanical behavior and failure mode of a 2D-SiC/SiC composite under uniaxial dynamic compression10.1016/j.ceramint.2018.07.280 ↗
17. In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite10.1016/j.jnucmat.2016.09.007 ↗
18. In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite10.1016/j.scriptamat.2013.05.032 ↗
19. Microscopic analysis of single-fiber push-out tests on ceramic matrix composites performed with Berkovich and flat-end indenter and evaluation of interfacial fracture toughness10.1016/j.jeurceramsoc.2012.09.009 ↗
20. Fatigue behavior related to interface modification during load cycling in ceramic-matrix fiber composites10.1016/0266-3538(93)90126-2 ↗
21. Effect of the stress level on the fatigue strengthening behavior of 2D needled C/SiC CMCs at room temperature10.1016/j.matdes.2015.10.013 ↗
22. Low cycle fatigue behavior of a 3D braided KD-I fiber reinforced ceramic matrix composite for coated and uncoated specimens at 1100 degrees C and 1300 degrees C10.1016/j.msea.2015.01.078 ↗
23. Damage and failure of fiber-reinforced ceramic-matrix composites subjected to cyclic fatigue, dwell fatigue and thermomechanical fatigue10.1016/j.ceramint.2017.07.130 ↗
24. Damage evolution of fiber-reinforced ceramic-matrix composites under stress-rupture and cyclic loading at elevated temperature in oxidizing atmosphere
25. Cyclic fatigue behavior of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures with different fiber preforms10.1016/j.msea.2015.12.069 ↗
26. Effects of cyclic tensile loading on the rupture behavior of orthogonal 3-D woven SiC fiber/SiC matrix composites at elevated temperatures in air10.1016/j.jeurceramsoc.2018.10.016 ↗
27. Tensile creep behavior of three-dimensional four-step braided SiC/SiC composite at elevated temperature10.1016/j.ceramint.2017.02.076 ↗
28. Tension-compression fatigue of an oxide/oxide ceramic composite at elevated temperature10.1016/j.msea.2016.02.057 ↗
29. Fatigue behavior of an advanced SiC/SiC ceramic composite with a self-healing matrix at 1300 degrees C in air and in steam10.1016/j.msea.2016.09.076 ↗
30. Failure analysis of C/SiC composites plate with a hole by the PFA and DIC method10.1016/j.ceramint.2017.01.051 ↗