Effect of debinding on alumina specimens and ultra-thin veneer fits using solvent-based stereolithography
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. The shear bond strength of porcelain laminate to prepared and unprepared anterior teeth
2. Comparison of conventional ceramic laminate veneers, partial laminate veneers and direct composite resin restorations in fracture strength after aging10.1016/j.jmbbm.2020.104172 ↗
3. Digital technologies to facilitate minimally invasive rehabilitation of a severely worn dentition: a dental technique10.1016/j.prosdent.2020.05.012 ↗
4. Color match of a feldspathic ceramic CAD-CAM material for ultrathin laminate veneers as a function of substrate shade, restoration color, and thickness10.1016/j.prosdent.2017.02.022 ↗
5. Protocol for a new concept of no‐prep ultrathin ceramic veneers10.1111/jerd.12351 ↗
6. The potential of additive manufacturing technologies and their processing parameters for the fabrication of all‐ceramic crowns: a review10.1111/jerd.12535 ↗
7. Trueness of removable partial denture frameworks additively manufactured with selective laser melting10.1016/j.prosdent.2020.06.035 ↗
8. Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations10.1016/j.jmbbm.2018.09.041 ↗
9. Tribological characterization of alumina ceramic manufactured by solvent-based slurry stereolithography
10. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications10.1016/j.jconrel.2020.10.008 ↗
11. Additive manufacturing of zirconia ceramics: a state-of-the-art review10.1016/j.jmrt.2020.05.131 ↗
12. Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology10.1016/j.jeurceramsoc.2019.05.023 ↗
13. Dense yttria-stabilized zirconia obtained by direct selective laser sintering
14. Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing10.1016/j.dental.2019.02.001 ↗
15. In vitro fracture and fatigue resistance of monolithic zirconia crowns fabricated by stereolithography
16. Synergy of solid loading and printability of ceramic paste for optimized properties of alumina via stereolithography-based 3D printing10.1016/j.jmrt.2020.08.038 ↗
17. Sintering temperature accuracy and its effect on translucent yttria-stabilized zirconia: flexural strength, crystal structure, tetragonality and light transmission10.1016/j.dental.2022.04.023 ↗
18. A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly10.1016/j.jmbbm.2019.06.031 ↗
19. Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores10.1007/s40145-020-0362-0 ↗
20. Microstructure, mechanical properties, friction and wear performance, and cytotoxicity of additively manufactured zirconia-toughened alumina for dental applications10.1016/j.compositesb.2022.110459 ↗
21. The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing10.1016/j.ceramint.2019.09.054 ↗
22. Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics10.1016/j.matchar.2020.110548 ↗
23. High-performance and high-precision Al2O3 architectures enabled by high-solid-loading, graphene-containing slurries for top-down DLP 3D printing10.1016/j.jeurceramsoc.2022.09.048 ↗
24. Layered manufacturing of dental ceramics: fracture mechanics, microstructure, and elemental composition of lithography‐sintered ceramic10.1111/jopr.12748 ↗
25. Stereolithography: a new method for processing dental ceramics by additive computer-aided manufacturing10.1016/j.dental.2017.01.018 ↗
26. Fabrication of hollow lattice alumina ceramic with good mechanical properties by Digital Light Processing 3D printing technology10.1016/j.ceramint.2021.06.065 ↗
27. Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars10.1016/j.dental.2020.01.016 ↗
28. Fabrication of zirconia ceramic parts by using solvent-based slurry stereolithography and sintering10.1007/s00170-018-2349-3 ↗
29. Additive manufacturing of dental prosthesis using pristine and recycled zirconia solvent-based slurry stereolithography10.1016/j.ceramint.2020.08.030 ↗
30. Solvent based Slurry Stereolithography 3D printed hydrophilic ceramic membrane for ultrafiltration application10.1016/j.ceramint.2020.02.010 ↗
31. 2015
32. Evaluation of marginal and internal fit of a CAD/CAM monolithic zirconia‐reinforced lithium silicate porcelain laminate veneer system10.1111/jopr.13438 ↗
33. Effect of the preparation techniques of photopolymerizable ceramic slurry and printing parameters on the accuracy of 3D printed lattice structures10.1016/j.jeurceramsoc.2021.08.052 ↗
34. Interlayer bond strength testing in 3D-printed mineral materials for construction applications10.3390/ma15124112 ↗
35. Influence of film thickness on joint bend strength of a ceramic/resin composite joint10.1016/S0109-5641(96)80030-3 ↗