A kinetic study of La0.75Sr0.25Cr0.5Mn0.5O3-δ nano-structured electrodes for intermediate temperature symmetric solid oxide fuel cells
Source abstract
Abstract
La0.75Sr0.25Cr0.5Mn0.5O3-δ (LSCM) mixed conducting has been studied as nanostructured air and fuel electrode, for intermediate temperature symmetric Solid Oxide Fuel cell (S–SOFC). The possible mechanisms involved in the oxygen reduction and hydrogen oxidation reactions of these LSCM nanostructures porous electrodes deposited on La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) electrolyte, were analyzed by electrochemical impedance spectroscopy (EIS) at 700 °C varying the oxygen partial pressure (pO2) and the hydrogen partial pressure (pH2). This analysis was complemented by the study of the electrical conductivity by the four-probe DC technique in the range between 300 and 800 °C in flowing dry atmospheres of air or H2. Results suggested that the O2 reduction reaction mechanism involves the O2- dissociative adsorption and O- ion migration near the surface region, while the H2-oxidation reaction limiting-step is controlled by a slow charge transfer process, and H2- dissociative adsorption on the ultimate O-layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
2. Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks. Constitutive materials of anode-supported cells10.1016/j.ceramint.2012.01.043 ↗
3. Materials and technologies for SOFC-components10.1016/S0955-2219(01)00120-0 ↗
4. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
5. Mechanical characterization of SOFC/SOEC cells10.1016/j.ceramint.2018.03.103 ↗
6. Controlling cation migration and inter-diffusion across cathode/interlayer/electrolyte interfaces of solid oxide fuel cells: a review10.1016/j.ceramint.2020.11.002 ↗
7. Reactivity at the Ln2NiO4+/electrolyte interface (ln = La, Nd) studied by electrochemical impedance spectroscopy and transmission electron microscopy10.1016/j.jpowsour.2014.04.082 ↗
8. Investigation on the phase stability of yttria-stabilized zirconia electrolytes for high-temperature electrochemical application10.1016/j.ceramint.2018.09.026 ↗
9. Recent advances and prospects of symmetrical solid oxide fuel cells10.1016/j.ceramint.2022.01.258 ↗
10. Tracking the nanoparticle exsolution/reoxidation processes of Ni-doped SrTi 0.3 Fe 0.7 O 3− δ electrodes for intermediate temperature symmetric solid oxide fuel cells10.1039/D2TA02959F ↗
11. Oxygen vacancies-rich iron-based perovskite-like electrodes for symmetrical solid oxide fuel cells10.1016/j.ceramint.2021.01.154 ↗
12. La0.7− xLnxCa0.3MnO3(Ln = Pr or Sm) perovskites as electrode materials for SOFCs10.1016/j.ceramint.2022.04.031 ↗
13. Nb-doped Sr2Fe1.5Mo0.5O6-δ electrode with enhanced stability and electrochemical performance for symmetrical solid oxide fuel cells10.1016/j.ceramint.2019.03.130 ↗
14. Phase transition in perovskite oxide La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3- δ observed by in situ high-temperature neutron powder diffraction10.1021/cm061413n ↗
15. Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications10.1016/j.jpowsour.2003.09.024 ↗
16. Effect of conductivity and adhesive properties of cathode current-collecting layer on cell performance inside stack for planar solid oxide fuel cells10.1016/j.ceramint.2014.03.117 ↗
17. Singhal · 2004
18. A review of anode materials development in solid oxide fuel cells10.1023/B:JMSC.0000034135.52164.6b ↗
19. The poisoning effect of sulfur-containing impurity gas on a SOFC anode: Part I. Dependence on temperature, time, and impurity concentration10.1016/S0167-2738(00)00653-6 ↗
20. Redox cycling of Ni–YSZ anode investigated by TPR technique10.1016/j.ssi.2005.06.016 ↗
21. Oxidation of methane in solid state electrochemical reactors10.1016/0167-2738(88)90417-1 ↗
22. Methane oxidation at redox stable fuel cell electrode La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3- δ10.1021/jp062376q ↗
23. Investigation of La0.75Sr0.25Cr0.5Mn0.5O3-δ–Ag composite anodes for solid oxide fuel cells obtained via a low-temperature sintering process10.1007/s11581-020-03750-y ↗
24. La0.75Sr0.25Cr0.5Mn0.5O3- as cathode for electrolysis and co-electrolysis of CO2 and H2O in solid oxide electrolysis cell10.1016/j.ceramint.2021.05.049 ↗
25. Synergistic effects of intrinsic cation disorder and electron-deficient substitution on ion and electron conductivity in La 1– x Sr x Co 0.5 Mn 0.5 O 3−δ (x = 0, 0.5, and 0.75)10.1021/ic502989c ↗
26. Synthesis and characterization of La0.75Sr0.25Cr0.9M0.1O3 perovskites as anodes for CO-fuelled solid oxide fuel cells10.1007/s10800-010-0150-6 ↗
27. Electrochemical performance of La0.75Sr0.25Cr0.9M0.1O3 perovskites as SOFC anodes in CO/CO2 mixtures10.1007/s10800-012-0459-4 ↗
28. A bottom-up building process of nanostructured La0.75Sr0.25Cr0.5Mn0.5O3-δ electrodes for symmetrical-solid oxide fuel cell: synthesis, characterization and electrocatalytic testing10.1016/j.jpowsour.2013.06.124 ↗
29. A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes10.1039/b600532b ↗
30. On the simultaneous use of La0.75Sr0.25Cr0.5Mn0.5O3−δ as both anode and cathode material with improved microstructure in solid oxide fuel cells10.1016/j.electacta.2006.05.006 ↗
31. A redox-stable efficient anode for solid-oxide fuel cells10.1038/nmat871 ↗
32. Symmetric and reversible solid oxide fuel cells10.1039/c1ra00284h ↗
33. Development of (La0.75Sr0.25)(Cr0.5Mn0.5)O3 cathodes of solid oxide fuel cells by gelcasting technique10.1149/1.2729205 ↗
34. Synthesis and characterization of pure-phase La0.75Sr0.25Cr0.5Mn0.5O3−δ nanocrystallites for solid oxide fuel cell applications10.1007/s11051-012-1104-1 ↗
35. Adaptation of an electrochemical system for measurement and regulation of oxygen partial pressure to a symmetrical thermogravimetric analysis system developed using a Cahn 1000 electrobalance10.1063/1.1137090 ↗
36. Electrochemical properties of novel SOFC dual electrode La0.75Sr0.25Cr0.5Mn0.3Ni0.2O3−δ10.1016/j.ssi.2010.10.015 ↗
37. The electrochemical properties of Sr(Ti,Fe)O 3-δ for anodes in solid oxide fuel cells10.1149/2.1271704jes ↗
38. High temperature properties of Sr2MgMo0.9TM0.1O6−δ (TM = Mn, Co and Ni)10.1016/j.ceramint.2017.11.006 ↗
39. Synthesis, phase stability and electrical conductivity of Sr2MgMoO6− anode10.1016/j.materresbull.2007.07.032 ↗
40. Effects of Co doping on the electrochemical performance of double perovskite oxide Sr 2 MgMoO 6−δ as an anode material for solid oxide fuel cells10.1021/jp212505c ↗
41. Electrical, chemical, and electrochemical properties of double perovskite oxides Sr 2 Mg 1– x Ni x MoO 6−δ as anode materials for solid oxide fuel cells10.1021/jp502503e ↗
42. Mixed conductivity and electrochemical behavior of (La0.75Sr0.25)0.95Cr0.5Mn0.5O3−δ10.1016/j.ssi.2006.11.012 ↗
43. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
44. Combined theoretical and experimental analysis of processes determining cathode performance in solid oxide fuel cells10.1039/c3cp44363a ↗
45. Hydrogen oxidation mechanisms on perovskite solid oxide fuel cell anodes10.1149/2.1321608jes ↗
46. Influence of lattice oxygen stoichiometry on the mechanism of methane oxidation in SOFC anodes10.1016/j.ssi.2010.07.019 ↗
47. 2013