Effect of HfC addition on ablation behavior of SiBCN ceramics
Source abstract
Abstract
Abstract To improve ablation resistance of SiBCN ceramics, an ultra-high temperature ceramics (UHTCs) phase of HfC was introduced into SiBCN ceramics via high-energy ball milling and hot press sintering methods. The microstructures, phase compositions, ablation properties and mechanism of SiBCN/HfC composites under a plasma flame ablation environment were investigated. The composite exhibited excellent ablation resistance under a heat flux density of 4.02 MW/m2 for 60 s. The mass ablation rate of the SiBCN/HfC composite is evaluated to be 2.3 × 10−5 mg/mm2·s, which is an order of magnitude lower than that of SiBCN-based ceramics. The result showed that the introduction of HfC provided a skeleton support structure for the oxide layer that can significantly improve the ablation resistance. Furthermore, HfO2 that originated from the oxidation of HfC can serve as the skeleton for reducing the fluidity of the continuous SiO2 glass protective layer. It also suggests that HfC can be an optional addition to improve the ablation properties of the SiBCN ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment10.1016/j.corsci.2014.01.006 ↗
2. Influence of sol-gel derived ZrB 2 additions on microstructure and mechanical properties of SiBCN composites10.1016/j.ceramint.2016.12.083 ↗
3. Ablation behavior and mechanism of SiCf/Cf/SiBCN ceramic composites with improved thermal shock resistance under oxyacetylene combustion flow10.1016/j.ceramint.2015.03.144 ↗
4. High-temperature oxidation behavior of dense SiBCN monoliths: carbon-content dependent oxidation structure, kinetics and mechanisms10.1016/j.corsci.2017.05.013 ↗
5. Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering10.1016/j.ceramint.2017.03.068 ↗
6. Experimental investigation of passive/active oxidation behavior of SiC based ceramic thermal protection materials exposed to high enthalpy plasma10.1016/j.jeurceramsoc.2012.09.002 ↗
7. Ablation behavior and mechanism of C/C-HfC-SiC composites
8. Ablation mechanism of carbon/carbon composites modified by HfC–SiC in two conditions under oxyacetylene torch10.1016/j.jmst.2016.01.013 ↗
9. Preparation and anti-oxidation characteristics of ZrSiO4–SiBCN(O) amorphous coating10.1016/j.apsusc.2015.01.119 ↗
10. Ablation resistance of SiC–HfC–ZrC multiphase modified carbon/carbon composites10.1016/j.corsci.2015.06.037 ↗
11. Thermo-mechanical behaviour of HfO2 coatings for aerospace applications10.4028/www.scientific.net/AMR.59.87 ↗
12. Decomposition-coarsening model of SiOC/HfO2 ceramic nanocomposites upon isothermal anneal at 1300°C10.1111/j.1551-2916.2012.05227.x ↗
13. Polymer-derived silicon oxycarbide/hafnia ceramic nanocomposites. Part II: stability toward decomposition and microstructure evolution at T ≥1000 °C10.1111/j.1551-2916.2009.03527.x ↗
14. HfC-based coating prepared by reactive melt infiltration on C/C composite substrate10.1016/j.ceramint.2012.12.059 ↗
15. High-temperature oxidation behavior of polymer-derived SiHfBCN ceramic nanocomposites10.1016/j.jeurceramsoc.2015.12.006 ↗
16. Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance10.1016/j.jallcom.2016.06.250 ↗
17. Effect of interlayer on the ablation properties of laminated HfC–SiC ceramics under oxyacetylene torch10.1016/j.corsci.2015.01.021 ↗
18. Ablation resistance of HfC–SiC coating prepared by supersonic atmospheric plasma spraying for SiC-coated C/C composites10.1016/j.ceramint.2015.11.161 ↗
19. Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C10.1016/j.corsci.2017.05.014 ↗
20. Bubble nucleation during oxidation of SiC10.1111/jace.13613 ↗
21. Effects of in situ amorphous graphite coating on ablation resistance of SiC fiber reinforced SiBCN ceramics in an oxyacetylene flame10.1016/j.corsci.2016.10.002 ↗
22. Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame10.1016/j.corsci.2015.07.006 ↗
23. Ablation resistance of ZrC-MoSi2/ZrC-SiC double-layered coating in a plasma flame10.1016/j.corsci.2018.10.006 ↗