journal article·2026-03Open access

3D porous carbon gel composite with transition metal particles for anchoring-diffusion-conversion of polysulfides for lithium–sulfur batteries

Ying Wang, Bo Yang, Hanqing Yu, Dingxin Shuai, Xiuqiong Hu, Ying Zhang, Jiyue Hou, Yiyong Zhang

Journal of Materiomics· Volume 12· Issue 2

Abstract

Lithium-sulfur batteries (LSBs) exhibit high energy density and high theoretical specific capacity, approximately one order of magnitude higher than traditional lithium-ion batteries. However, the shuttling effect of lithium polysulfides (LiPSs) generated during the charge-discharge process severely compromises battery performance and hinders commercialization. In this paper, a 3D porous carbon gel sulfur host, M@rGO–PCG (M=Ni, Co), composed of transition metal particles and redox graphene, was fabricated through gelation and freeze-drying techniques. This material enhances the conductivity of the cathode, buffers the volume expansion of the electrode, and further accelerates the catalytic conversion of LiPSs. The assembled Ni@rGO–PCG/S and Co@rGO–PCG/S batteries deliver initial discharge specific capacities of 1390.0 mA·h·g −1 and 1603.6 mA·h·g −1 at a current rate of 0.1 C, respectively. The findings provide valuable insights into the synergistic suppression of the shuttling effect through multiple functions. • M@rGO–PCG (M=Ni, Co) were prepared by gelation and freeze-drying and used as hosts for sulfur cathodes. • M@rGO–PCG (M=Ni, Co) inhibiting LiPSs shuttling via physical confinement, chemical adsorption and catalytic sulfur fixation. • M@rGO–PCG/S (M=Ni, Co) cathodes exhibit superior cycling stability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Lightweight materials for high energy density lithium–sulfur batteries10.1002/aenm.202406069 ↗
2. Performance benchmarking and analysis of lithium-sulfur batteries for next-generation cell design10.1038/s41467-025-60528-4 ↗
3. Rechargeable metal-sulfur batteries: key materials to mechanisms10.1021/acs.chemrev.3c00919 ↗
4. Hierarchical porous biomass-derived electrodes with high areal loading for lithium–sulfur batteries10.1039/D5RA02380G ↗
5. Challenges and approaches to designing high-energy density lithium-sulfur pouch cells10.1002/batt.202400544 ↗
6. Insights into the overcharge-induced failure mechanism of lithium–sulfur batteries10.1002/batt.202500350 ↗
7. Recent progress and strategies of cathodes toward polysulfides shuttle restriction for lithium-sulfur batteries10.1007/s12598-024-02708-7 ↗
8. A review of cathode materials in lithium-sulfur batteries10.1007/s11581-020-03767-3 ↗
9. Designing principles of advanced sulfur cathodes toward practical lithium-sulfur batteries10.1002/sus2.42 ↗
10. Catalytic effects in lithium–sulfur batteries: promoted sulfur transformation and reduced shuttle effect10.1002/advs.201700270 ↗
11. Heteroatom-doping modulates metal-support interactions in carbon-supported cobalt catalysts to accelerate polysulfide redox for lithium–sulfur batteries10.1002/adfm.202421780 ↗
12. An electron-coupled Co-ZrO2 nanodot heterojunction electrocatalyst with lewis acid–base site pairs enables high redox reaction kinetics of Li–S batteries10.1021/acsnano.4c06270 ↗
13. Hollow urchin-like Ni–Co MOF and RGO synergistically functionalizing the separators for high-performance Li–S batteries10.1021/acs.iecr.4c02291 ↗
14. Enabling efficient anchoring-conversion interface by fabricating double-layer functionalized separator for suppressing shuttle effect10.1002/ange.202407042 ↗
15. Recent advances and strategies toward polysulfides shuttle inhibition for high-performance Li–S batteries10.1002/advs.202106004 ↗
16. Lithium–sulfur battery cathode design: tailoring metal-based nanostructures for robust polysulfide adsorption and catalytic conversion10.1002/adma.202008654 ↗
17. An electrolyte additive of bromoxoindole enables uniform Li-Ion flux and tunable Li2S deposition for high-performance lithium–sulfur batteries10.1039/D3TA07591E ↗
18. Enhancing heterojunction interface charge transport efficiency in NiCo-LDHs@Co/CoO-CNFs for high-performance asymmetric and zinc-ion hybrid supercapacitors10.1016/j.carbon.2024.119482 ↗
19. High-performance flexible CoFe2O4/N-Doped carbon nanofiber composite anode materials for sodium-ion batteries10.1016/j.diamond.2024.111730 ↗
20. Co–Ni synergistic catalysis enabling gradient mesoporous carbon electrodes for high-performance supercapacitors10.1016/j.jpcs.2025.112814 ↗
21. ZnO/ZnS heterostructure in N-Doped porous carbon for anchoring–diffusion–conversion of polysulfides for high-performance lithium–sulfur batteries10.1007/s12598-024-02704-x ↗
22. Regulating the Li-O coordination in polymer electrolytes via semi-ionic C-F bonds for high-voltage solid lithium metal batteries10.1016/j.cej.2024.149497 ↗