Na–Ni co-substitution induced simultaneous enhancement of dielectric constant and breakdown field in CaCu3Ti4O12 ceramics: A mechanism study
Source abstract
Abstract
: Due to conflicts in physical mechanisms, simultaneously improving the dielectric constant ( ε ˊ) and breakdown field strength ( E b ) of dielectric materials remains challenging. Fortunately, progress has been made in addressing this issue, though the underlying mechanisms still require further investigation. In this study, Ca 1– x Na x Cu 2.95 Ni 0.05 Ti 4 O 12 ( x =0, 0.003, 0.005, 0.007) ceramics were prepared, and the sample with x =0.005 exhibited significant enhancement in both ε ˊ and E b . Through density functional theory calculations and X-ray photoelectron spectroscopy, Na doping is confirmed to promote Cu + and concentration, while Ni increases Ti 3+ content. Notably, Cu + and Ti 3+ together enhance ε ˊ, and the increased forms depletion layers to improve E b . These findings clarify the synergistic mechanism of Na–Ni co-doping for the simultaneous improvement of ε ˊ and E b in CCTO ceramics. They not only provide research insights for the composition design of high performance ceramic capacitors but also hold great promise for the development of high energy density dielectric ceramics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dielectric properties of ceramics · Dielectric materials and actuators · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. High-entropy engineered BaTiO3-based ceramic capacitors with greatly enhanced high-temperature energy storage performance10.1038/s41467-025-56195-0 ↗
2. Constructing superrelaxor critical state towards giant energy storage in lead-free dielectric ceramics10.1038/s41467-026-68299-2 ↗
3. Local structure strategies promoting lead-free dielectric energy-storage applications10.1002/smll.202512097 ↗
4. A BaTiO3-based flexible ferroelectric capacitor for non-volatile memories10.1016/j.jmat.2024.04.001 ↗
5. Pb(ZrxTi1–x)O3 single crystal growth and its miniature devices for medical high-frequency ultrasound imaging10.1016/j.ceramint.2025.06.344 ↗
6. Crystal structure and dielectric properties of novel temperature-stable SrLn2O4 (Ln=Ho,Tm) microwave dielectric ceramic
7. High dielectric constant in ACu3Ti4O12 and ACu3Ti3FeO12 phases10.1006/jssc.2000.8703 ↗
8. Flexible chitin/CCTO composite films for dielectric capacitor: the influence of filler morphological structure10.1016/j.ceramint.2025.01.170 ↗
9. Enhanced sensitivity of capacitive pressure and strain sensor based on CaCu3Ti4O12 wrapped hybrid sponge for wearable applications10.1002/adfm.201910020 ↗
10. Microstructure, dielectric, non–ohmic, and humidity–sensing properties of Ca1+xCu2.9–xMg0.1Ti4O12 ceramics10.1016/j.ceramint.2025.06.206 ↗
11. Colossal permittivity and humidity sensing properties of CaCu3Ti4O12 ceramics derived from cockle shell CaCO3 via CO2 absorption10.1038/s41598-025-03201-6 ↗
12. CaCu3Ti4O12/CNT nanocomposite for enhanced photocatalytic seawater splitting to hydrogen generation10.1016/j.ijhydene.2025.05.318 ↗
13. Wideband frequency tunability of CaCu3Ti4O12 based dielectric resonator antennas via the addition of glass10.1111/ijac.13530 ↗
14. Embedded thin film capacitors-theoretical limits10.1109/TADVP.2002.806800 ↗
15. Enhanced dielectric and nonohmic properties of SrTiO3-modified CaCu3Ti4O12 ceramics10.1016/j.cap.2022.01.012 ↗
16. Microstructure and tunable dielectric properties of Ba0.6Sr0.4TiO3/Y2O3 composite ceramics10.1007/s10853-016-9922-7 ↗
17. Tuning electrical heterogeneity in CaCu3Ti4O12-ZnO ceramics for high dielectric and nonlinear properties10.1016/j.materresbull.2023.112276 ↗
18. Hierarchical polar–nonpolar phase architecture enabling excellent lead-free capacitive energy storage10.1039/D6SC00039H ↗
19. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers - a review10.1016/j.pmatsci.2014.10.002 ↗
20. High dielectric permittivity and dielectric relaxation behavior in a Y2/3Cu3Ti4O12 ceramic prepared by a modified sol-gel route10.1016/j.ceramint.2022.02.074 ↗
21. Improvement of temperature stability, dielectric properties and nonlinear current-electric field characteristic of CaCu3Ti4.2−xSnxO12 ceramics10.1007/s11664-020-08044-7 ↗
22. Dielectric properties and nonlinear electrical response of Nb5+/Cr3+-Codoped CaCu3Ti4O12 ceramics10.1021/acsaelm.4c00133 ↗
23. Giant dielectric permittivity observed in Li and Ti doped NiO10.1103/PhysRevLett.89.217601 ↗
24. Microstructure and dielectric properties of CaCu3Ti4O12 ceramics with high breakdown field strength prepared via polymer pyrolysis10.1016/j.materresbull.2022.111946 ↗
25. Exceptional dielectric and varistor properties of Sr, Zn and Sn co-doped calcium copper titanate ceramics10.1039/D3RA00743J ↗
26. Effect of the Ba0.6Sr0.4TiO3 additives on microstructure and electrical properties of CaCu3Ti4O1210.1007/s10854-024-12028-2 ↗
27. Significantly enhanced breakdown strength and energy density in sandwich-structured nanocomposites with low-level BaTiO3 nanowires10.1016/j.nanoen.2020.105412 ↗
28. Superior dielectric and varistor properties of ZnO or SnO2 diffused calcium copper titanate ceramics10.1063/5.0139359 ↗
29. Tuning the interfacial insulating shell characteristics in CaCu3Ti4O12 nanowires/polyetherimide nanocomposites for high-temperature capacitive energy storage10.1039/D2TC00968D ↗
30. A novel CaCu2.8–xZnxTi4O12 system: a high-performance dielectric with nonlinear J–E properties10.1016/j.jmrt.2022.07.016 ↗
31. Simultaneously high dielectric constant and breakdown strength in CaCu3Ti4O12-filled polymer composites10.1007/s11664-022-09708-2 ↗
32. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
33. High sintering and dielectric performance: the improved (Mg, Zn)3B2O6 ceramics with the help of the DFT calculation10.1016/j.jma.2021.08.033 ↗
34. Novel defect clusters from density functional theory calculations for colossal dielectric response in In3+ and F− co-doped TiO2 ceramics10.1111/jace.70008 ↗
35. DFT-based and experimental study on Sr-doped BaTiO3: impacts on piezoelectric and ferroelectric performance10.1016/j.ceramint.2025.03.069 ↗
36. Optimizing giant dielectric performance in CCTO ceramics through Cr and Zn co-doping10.1016/j.ceramint.2024.11.422 ↗
37. Colossal dielectric permittivity, reduced loss tangent and the microstructure of Ca1−xCdxCu3Ti4O12−2yF2y ceramics10.1039/D1RA02707G ↗
38. Improved dielectric properties in a′-site nickel-doped CaCu3Ti4O12 ceramics10.1111/jace.14960 ↗
39. Microstructure and dielectric properties of Na and Ni co-substituted CaCu3Ti4O12 ceramics with high dielectric constant and low loss10.1016/j.matchemphys.2024.128973 ↗
40. Measurement techniques and challenges of wireless LC resonant sensors: a review10.1109/ACCESS.2023.3309300 ↗
41. Giant dielectric response, nonlinear characteristics, and humidity sensing properties of a novel perovskite: Na1/3Sr1/3Tb1/3Cu3Ti4O1210.1039/D3RA06162K ↗
42. Frequency-dependent dielectric constant prediction of polymers using machine learning10.1038/s41524-020-0333-6 ↗
43. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
44. Debye and non-debye relaxation10.1088/0022-3719/18/19/021 ↗
45. Microstructure evolution, dielectric properties, and nonlinear response of Na+-doped CdCu3Ti4O12 ceramics10.1039/D4RA04602A ↗
46. Y2/3–3/2xSrxCu3Ti4O12 polycrystalline ceramic: a structural and dielectric investigation10.1016/j.ceramint.2024.05.297 ↗
47. Significantly improved giant dielectric properties and enhanced nonlinear coefficient of Ni2+ doped CaCu3Ti4O12/CaTiO3 composites10.1016/j.heliyon.2023.e17048 ↗
48. Evidence of the internal domains for inducing the anomalously high dielectric constant of CaCu3Ti4O1210.1021/cm051180k ↗
49. Enhanced breakdown properties and dielectric loss of CaCu3Ti4O12 ceramics via SrO minor addition10.1016/j.materresbull.2023.112425 ↗
50. Enhanced giant dielectric properties and improved nonlinear electrical response in acceptor-donor (Al3+, Ta5+)-substituted CaCu3Ti4O12 ceramics10.1007/s40145-021-0499-5 ↗
51. Improved giant dielectric properties of CaCu3Ti4O12 via simultaneously tuning the electrical properties of grains and grain boundaries by F− substitution10.1039/C6RA27381E ↗
52. High breakdown field CaCu3Ti4O12 ceramics: roles of the secondary phase and of Sr doping10.3390/en10071031 ↗
53. Effects of charge compensation on colossal permittivity and electrical properties of grain boundary of CaCu3Ti4O12 ceramics substituted by Al3+ and Ta5+/Nb5+10.3390/molecules26113294 ↗
54. Effects of sintering condition on giant dielectric and nonlinear current-voltage properties of Na1/2Y1/2Cu3Ti3.975Ta0.025O12 ceramics10.1016/j.heliyon.2023.e12946 ↗
55. Enhanced dielectric properties and grain boundary potentials in sulfur-doped CaCu3Ti4O12 thin films10.1016/j.jeurceramsoc.2020.01.052 ↗
56. Effect of Na and Nd doping on microstructure and dielectric properties of CaCu3Ti4O12-based ceramics10.1016/j.ceramint.2025.04.069 ↗
57. Dielectric enhancement and stabilization of (1–x)BaNd2Ti4O12/xCaCu3Ti4O12 composites10.1016/j.ceramint.2024.12.197 ↗
58. Photoemission study of pristine and Ni-doped SrTiO3 thin films10.1103/PhysRevB.104.165129 ↗
59. Magnetic susceptibility, XPS and NEXAFS spectroscopy of Ni-doped CaCu3Ti4O12 ceramics10.1016/j.matchemphys.2020.123310 ↗
60. A short review on copper calcium titanate (CCTO) electroceramic: synthesis, dielectric properties, film deposition, and sensing application10.1007/s40820-016-0089-1 ↗
61. Strongly enhanced dielectric response and structural investigation of (Sr2+, Ge4+) co-doped CCTO ceramics10.1021/acs.jpcc.0c04484 ↗
62. Effect of europium addition on the microstructure and dielectric properties of CCTO ceramic prepared using conventional and microwave sintering10.3390/molecules28041649 ↗
63. Atomistic calculations of charged point defects at grain boundaries in SrTiO310.1103/PhysRevB.104.054114 ↗
64. Oxygen vacancy segregation and space-charge effects in grain boundaries of dry and hydrated BaZrO3
65. Mechanism of the effect of Al and Sr substitution on the electrical resistance in CaCu3Ti4O12 ceramics10.1016/j.physb.2023.415577 ↗
66. Origin of the temperature stability of dielectric constant in CaCu3Ti4O1210.1016/j.ceramint.2019.03.229 ↗
67. Hoisting high-field breakdown strength in CCTO/PVDF composites via introducing high insulating alumina interlayer