Using PyC coated short chopped carbon fiber to tackle the dilemma between toughness and strength of ZrC-SiC
Source abstract
Abstract
Abstract Graceful toughness and high strength are mutually exclusive in engineering ZrC-SiC ceramic, which are hard to be possessed simultaneously. Here, the pyrolytic carbon (PyC) coated short chopped carbon fibers were utilized to toughen ZrC-SiC ceramic, tackling the dilemma between toughness and strength. Through the uniform incorporation of PyC coated short chopped carbon fibers, the penetration crack mode of ZrC-SiC was changed into an obviously deflecting propagation path with closed phenomenon. The PyC coating brought about a relatively weak interface bonding and guided the crack propagate along the weak interface, consequently resulting in a more flexuous crack propagation instead of passing through the fibers directly. Meanwhile, the fibers received effective protection of coating inhibiting from performance degradation. The PyC coated Cf/ZrC-SiC obtained a fracture toughness highly reaching 7.57 ± 0.33 MPa m1/2 with a rivaling flexural strength at 268 ± 16 MPa. Moreover, the graceful load-displacement curve is illustrated with a smoothly extended displacement of 0.12 mm and increased load to 83 N, which forms an obvious yield plateau. To some degree, this work provided an effective solution to tackling the dilemma between toughness and strength of engineering ZrC-SiC ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Spark plasma sintering and mechanical behaviour of ZrC-based composites10.1016/j.scriptamat.2008.05.026 ↗
2. Structural evolution of zirconium carbide under ion irradiation10.1016/j.jnucmat.2007.05.034 ↗
3. UHTC composites for hypersonic applications
4. Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds10.1016/S0955-2219(99)00129-6 ↗
5. Sintering behaviour and microstructures of carbides and nitrides for the inert matrix fuel by spark plasma sintering10.1016/j.jnucmat.2006.02.089 ↗
6. Oxidation behavior of spark plasma sintered ZrC–SiC composites obtained from the polymer-derived ceramics route10.1016/j.ceramint.2014.07.093 ↗
7. Synthesis of ZrC–SiC powders by a preceramic solution route10.1111/jace.12551 ↗
8. Using macroporous graphene networks to toughen ZrC–SiC ceramic10.1016/j.jeurceramsoc.2018.04.037 ↗
9. Review carbon fibers for composites10.1023/A:1004780301489 ↗
10. Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C10.1016/j.ceramint.2009.03.030 ↗
11. Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration10.1016/j.jeurceramsoc.2009.10.016 ↗
12. Analysis of the mechanical properties in short carbon fiber-toughened ZrB2–SiC ultra-high temperature ceramic10.1177/0021998309346545 ↗
13. Oxidation behavior of spark plasma sintered ZrC–SiC composites obtained from the polymer-derived ceramics route10.1016/j.ceramint.2013.08.105 ↗
14. Low temperature sintering of ZrC–SiC composite10.1016/j.jallcom.2011.08.041 ↗
15. Damage mechanism analysis to the carbon fiber and fiber-ceramic interface tailoring of Cf/ZrC-SiC using PyC coating10.1016/j.ceramint.2018.07.065 ↗
16. The influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites10.1016/S1359-835X(00)00095-6 ↗
17. The design of the fibre-matrix interfacial zone in ceramic matrix composites10.1016/S1359-835X(97)00128-0 ↗
18. Influence of fiber coating thickness on microstructure and mechanical properties of carbon fiber-reinforced zirconium diboride based composites10.1016/j.ceramint.2013.07.040 ↗
19. Effect of pyrolytic carbon interface thickness on microstructure and mechanical properties of lightweight zirconium boride modified carbon-bonded carbon fiber composites10.1016/j.compositesb.2016.03.094 ↗
20. Effect of PyC interphase thickness on mechanical and ablation properties of 3D Cf/ZrC–SiC composite10.1016/j.ceramint.2016.04.187 ↗
21. Coating of carbon short fibers with thin ceramic layers by chemical vapor deposition10.1016/j.tsf.2006.02.001 ↗
22. Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites10.1016/S0921-5093(01)01184-4 ↗
23. The fracture mechanics of finite crack extension10.1016/j.engfracmech.2004.07.001 ↗
24. Reactive hot pressing of ZrC–SiC ceramics at low temperature10.1111/jace.12090 ↗
25. Mechanical enhancement of lightweight ZrB2-modified carbon-bonded carbon fiber composites with self-grown carbon nanotubes10.1016/j.carbon.2016.02.077 ↗