Power loss density fluctuation of lightweight flexible electromagnetic wave absorption composites constructed by Co-based aerogels with magnetic variation
Source abstract
Abstract
ABSTRACT Higher electromagnetic wave absorption (EMWA) performance, more flexible and lower density are the incompatibility for the flexible EMWA materials, the insufficient analysis of attenuation conditions for every part in the bulk EMWA materials based on electrical/magnetic properties and reflection loss ( RL ) resulted in the inability to obtain the actual electromagnetic wave (EMW) consumption capacity in EMWA materials during practical applications. In this study, the lightweight flexible EMWA composites fabricated by Co-based aerogels have broadest effective absorption band (EAB, frequency for reflection loss≤−10 dB) of 5.77 GHz, best minimum reflection loss ( ) of –49.94 dB and maximum radar cross section (RCS) reduction of 29.55 dB·m 2 . After the salt spray test for the flexible EMWA composites, the largest EAB, optimum and greatest RCS reduction are 5.42 GHz, –24.41 dB and 19.34 dB·m 2 . The power loss density (PLD) distribution of EMW in all regions of the bulk EMWA materials is calculated based on electromagnetic parameters, and the influence of RL and the magnetic variation on PLD distribution is investigated. The flexible EMWA composite with 18% (in mass) Co-800 aerogel is a very promising lightweight EMWA material for preventing electromagnetic interference/pollution and enhancing radar stealth in the salt-spray environment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Metamaterials and Metasurfaces Applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Multifunctional MXene/C aerogels for enhanced microwave absorption and thermal insulation10.1007/s40820-023-01158-7 ↗
2. TiN/Ni/C ternary composites with expanded heterogeneous interfaces for efficient microwave absorption10.1016/j.compositesb.2020.108028 ↗
3. Dimensional design and core-shell engineering of nanomaterials for electromagnetic wave absorption
4. Heterointerface engineering in electromagnetic absorbers: new insights and opportunities10.1002/adma.202106195 ↗
5. Dual-step redox engineering of 2D CoNi-Alloy embedded B, N-Doped carbon layers toward tunable electromagnetic wave absorption and light-weight infrared stealth heat insulation devices
6. Controllable atomic migration in microstructures and defects for electromagnetic wave absorption enhancement10.1002/adfm.202403397 ↗
7. Research progress on spherical carbon-based electromagnetic wave absorbing composites10.1016/j.carbon.2024.119244 ↗
8. Magnetic-driven broadband epsilon-near-zero materials at radio frequency
9. Flexible silver nanowire/carbon fiber felt metacomposites with weakly negative permittivity behavior10.1039/C9CP06196G ↗
10. Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption10.1007/s42114-020-00202-z ↗
11. Flexible carbon-coated FeNi alloy/PDMS nanocomposites toward a multifunctional high-performance electromagnetic absorber10.1016/j.jallcom.2024.173855 ↗
12. Self-healing polyurethane coating based on porous carbon/Ni hybrid composites for electromagnetic wave absorption10.1016/j.compositesa.2023.107830 ↗
13. An electromagnetic wave absorbing material with self-healing function
14. Flexible film constructed by asymmetrically-coordinated La1N4Cl1 moieties on interconnected nitrogen-doped graphene nanocages for high-efficiency electromagnetic wave absorption
15. Synergistic polarization relaxation in heteroatom-optimized heterointerfaces for electromagnetic wave absorption
16. Anion-doping-induced vacancy engineering of cobalt sulfoselenide for boosting electromagnetic wave absorption
17. From VIB-to VB-group transition metal disulfides: structure engineering modulation for superior electromagnetic wave absorption10.1007/s40820-023-01247-7 ↗
18. Surface engineering strategy for MXene to tailor electromagnetic wave absorption performance10.1016/j.cej.2024.152041 ↗
19. Tracking regulatory mechanism of trace Fe on graphene electromagnetic wave absorption10.1007/s40820-023-01280-6 ↗
20. Low-temperature oxidation induced phase evolution with gradient magnetic heterointerfaces for superior electromagnetic wave absorption10.1007/s40820-024-01516-z ↗
21. Nitrogen-doped graphene@Co/C composite aerogel microspheres for highly efficient electromagnetic wave absorption10.1021/acs.iecr.4c01899 ↗
22. Transforming in-situ grown chitosan/ZIF-67 aerogels into 3D N-doped Co/CoO/carbon composites for improved electromagnetic wave absorption10.1016/j.jallcom.2022.168195 ↗
23. Multi-scale Co-MOF derived Co-N/C@ graphene hybrid aerogel for effective electromagnetic wave absorption10.1016/j.synthmet.2025.117909 ↗
24. Dually inner-porous composites with Co@C prismatic rods anchored into graphene aerogel toward superior electromagnetic wave absorbing materials
25. Electromagnetic wave absorption performance and rheological behavior of rubber composites with low mass filling rate carbon nanofiber aerogel10.1016/j.jmat.2024.02.004 ↗
26. In-situ synthesis of Co/Co3O4 nanoparticles decorated carbon nanofiber aerogels for lightweight electromagnetic wave absorption rubber composites with multiple loss effects10.1016/j.jallcom.2024.174559 ↗
27. New sol-gel synthetic route to transition and main-group metal oxide aerogels using inorganic salt precursors10.1016/S0022-3093(01)00427-6 ↗
28. A cost-effective supercapacitor material of ultrahigh specific capacitances: spinel nickel cobaltite aerogels from an epoxide-driven sol-gel process10.1002/adma.200902175 ↗
29. Co3O4 nanoparticles characterized by XPS and UPS10.1116/6.0000477 ↗
30. Near ambient pressure XPS investigation of the interaction of ethanol with Co/CeO2 (111)10.1016/j.jcat.2013.07.015 ↗
31. MOF-derived N-doped carbon nanocages trap CoP nanoparticles anchored on rGO to modulate dielectric polarization behavior for microwave absorption10.1016/j.compositesa.2023.107808 ↗
32. Photoelectron spectroscopy of ceria: reduction, quantification and the myth of the vacancy peak in XPS analysis10.1002/sia.7254 ↗
33. Cubic-like Co/NC composites derived from ZIF-67 with a dual control strategy of size and graphitization degree for microwave absorption10.1039/D1NR03450B ↗
34. MOF-derived Co/ZnO/C nanocomposites with excellent microwave absorption properties10.1007/s10854-023-10858-0 ↗
35. Ant-nest-inspired biomimetic composite for self-cleaning, heat-insulating, and highly efficient electromagnetic wave absorption10.1002/adfm.202407458 ↗
36. Control of cobalt nanoparticle size by the germ-growth method in inverse micelle system: Size-dependent magnetic properties10.1557/JMR.1999.0207 ↗
37. Grain-size dependence of remanence and coercive field of isotropic nanocrystalline composite permanent magnets10.1016/0304-8853(95)00494-7 ↗
38. Remanence and coercivity in isotropic nanocrystalline permanent magnets10.1103/PhysRevB.49.6100 ↗
39. Conductive MOFs with tailored polarization loss for broadband absorption at ultrathin thickness10.26599/NR.2025.94907919 ↗
40. Tunable electromagnetic response behaviors via cross-scale morphological structural engineering for ultra-wideband microwave absorption10.1002/cjoc.70169 ↗
41. Self-assembled nanostructures of 0D ZnO on 3D chitin-derived carbon aerogel for wideband electromagnetic wave absorption10.1016/j.carbon.2025.120382 ↗
42. Multi-dimensional Sb2S3@MoS2 heterojunctions for electromagnetic wave absorption
43. Morphology engineering of MIL-88A-derived 0D/1D/2D nanocomposites toward wideband microwave absorption10.1016/j.jmst.2024.12.012 ↗
44. Supramolecular self-assembly derived graphitic carbon nitride nanocomposites toward wide bandwidth electromagnetic wave absorption10.1016/j.jmst.2025.03.028 ↗
45. Electromagnetic collaborative optimization of DyFe-MOFs derivatives for ultra-thin electromagnetic wave absorption10.26599/JAC.2025.9221163 ↗
46. Morphology engineering of YNi-MOFs derivatives for broadband electromagnetic wave absorption10.1007/s42114-025-01340-y ↗
47. Multicomponent competitive synergistically active NiFe2O4/C-g-C3N4/RGO heterostructure for efficient electromagnetic wave absorption10.1016/j.carbon.2024.119964 ↗
48. Corrosion electrochemical characteristics of red iron oxide pigmented epoxy coatings on aluminum alloys10.1016/j.corsci.2004.11.009 ↗
49. On the development of polypyrrole coatings with self-healing properties for iron corrosion protection10.1016/j.corsci.2005.05.057 ↗
50. Silica stabilized iron particles toward anti-corrosion magnetic polyurethane nanocomposites10.1039/C1RA00758K ↗
51. SiCnws/CNTs/Cf-C/SiOC composites with multi-scale lossy phases for simultaneous electromagnetic wave absorption and thermal insulation10.1016/j.jmat.2024.04.010 ↗
52. Enhancement in conduction loss induced by morphology engineering for excellent electromagnetic wave absorption10.1016/j.jmat.2024.100927 ↗