journal article·2020-05

Synthesis of tungsten carbide nanopowders by direct carbonization of tungsten oxide and carbon: Effects of tungsten oxide source on phase structure and morphology evolution

Haoyang Wu, Qianyu Wang, Mingli Qin, Ruowei Yin, Ziyue Zhang, Baorui Jia, Xuanhui Qu

Ceramics International· Volume 46· Issue 7
Publisher page

Abstract

Abstract In the paper, WC nanopowders are successfully prepared by carbothermal reduction method, and the effect of tungsten oxide source on the phase structure evolution and products properties of the as-synthesized WC nanopowders has been investigated. Four tungsten oxide powders are chosen as tungsten oxide sources, e.g., rods-like WO3 , WO3 nanopartiles, WO3 micro-particles and WO2.9 micro-particles. Compared with other three tungsten oxide sources, the WO3 micro-particles possesses small particle size, less agglomerates and good dispersity and the uniform tungsten oxide-carbon mixture after ball milling can be easily obtained. The appropriate tungsten oxide source can result in lower processing temperature (≤1200 °C) and shorter holding time (≤3 h). Single-phase WC powders with average particle size of 100 nm and uniform particle distribution can be achieved by micro-particle-like WO3 at 1100 °C for 3 h. The as-prepared WC products by other three tungsten oxide sources exhibit problems of more aggregates, non-uniform particle size and large particle size (250 nm), respectively. In addition, the method can provide a facile, low-cost, efficient, and industrially feasible pathway for large scale preparation of WC nanopowders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Chemical processing and properties of nanostructured WC-Co materials10.1016/0965-9773(93)90059-K ↗
2. Synthesis and characterization of WC-Co nanocomposites by novel chemical method10.1016/j.ceramint.2005.09.010 ↗
3. Plasma synthesis of tungsten carbide and cobalt nanocomposite powder10.1016/j.jallcom.2009.03.134 ↗
4. Spark plasma sintering of WC-Co tool materials prepared with emphasis on WC core-Co shell structure development10.1016/j.ijrmhm.2015.04.014 ↗
5. Effects of mechanical milling on the carbothermal reduction of oxide WC/Co hardmetal scrap10.1007/s12540-016-5409-y ↗
6. Preparation of WC/Co composite powders by electroless plating10.1016/j.ceramint.2016.11.220 ↗
7. Fabrication of ultrafine and high-purity tungsten carbide powders via a carbothermal reduction–carburization process10.1016/j.jallcom.2019.01.055 ↗
8. A facile route to synthesize WC-Co nanocomposite powders and properties of sintered bulk10.1016/j.jallcom.2016.03.285 ↗
9. Phase evolution in synthesis of nanocrystalline WC-η composite powder by solid-state in situ reactions10.1016/j.ijrmhm.2017.10.022 ↗
10. Preparation of tungsten carbides by reducing andcarbonizing WO2 with CO10.1016/j.jallcom.2018.02.224 ↗
11. Investigation on reduction and carbonization process of WC-Co composite powder obtained by in situ synthesis10.1016/j.jallcom.2018.10.211 ↗
12. Synthesis of WC powder through microwave heating of WO3-C mixture10.1007/s12613-017-1396-3 ↗
13. Effect of cobalt on the synthesis and sintering of WC-Co composite powders10.1016/j.jallcom.2018.06.367 ↗
14. Effect of extended milling of scheelite ore with activated charcoal on direct synthesis of nano tungsten carbide10.1080/02726351.2015.1013232 ↗
15. The preparation of tungsten carbides and tungsten powders by reaction of tungsten trioxide with methanol10.1016/j.ijrmhm.2018.06.002 ↗
16. Combustion synthesis of nano-sized tungsten carbide powder and effects of sodium halides10.1007/s11051-009-9736-5 ↗
17. Morphology and carbon content of WC-6% Co nanosized composite powders using glucose as carbon source10.1016/S1003-6326(18)64704-1 ↗
18. Recovery of tungsten carbides to prepare the ultrafine WC-Co composite powder by two-step reduction process10.1016/j.powtec.2016.10.071 ↗
19. Synthesis of nano WC from water soluble raw materials: effects of tungsten source and synthesis atmosphere on chemical and phase structure evolution10.1016/j.ijrmhm.2014.12.002 ↗
20. Phase evolution in the synthesis of WC–Co–Cr3C2–VC nanocomposite powders from precursors10.1016/j.ijrmhm.2013.03.007 ↗
21. Thermodynamic analysis for in situ synthesis of WC-Co composite powder from metal oxides10.1016/j.matchemphys.2007.11.020 ↗
22. Tungsten carbide powder obtained by direct carburization of tungsten trioxide using mechanical alloying method10.1016/j.jallcom.2015.10.265 ↗
23. Preparation of ultrafine WC-10Co composite powders by reduction and carbonization10.1007/s11771-013-1711-8 ↗
24. Sintering variables optimization, microstructural evolution and physical properties enhancement of nano-WC ceramics10.1016/j.jallcom.2018.07.006 ↗
25. A simple and novel route to synthesize nano-vanadium carbide using magnesium powders, vanadium pentoxide and different carbon source10.1016/j.ijrmhm.2011.03.004 ↗
26. Direct solid-state synthesis of tungsten carbide nanoparticles from mechanically activated tungsten oxide and graphite10.1016/j.ijrmhm.2010.06.004 ↗
27. Effect of cobalt on the synthesis and sintering of WC-Co composite powders10.1016/j.jallcom.2018.06.367 ↗