The influence of mechanical activation process on the microstructure and mechanical properties of bulk Ti2AlN MAX phase obtained by reactive hot pressing
Source abstract
Abstract
The effect of mechanical activation process on the microstructure and mechanical properties of bulk nanostructured TiAlN compound has been investigated in this work. The mixture of Ti and AlN powders was prepared in a 2:1 molar ratio, and a part of this powder was subjected to a high-energy milling process under argon atmosphere for 10 h using agate as grinding media. Finally, the densification and formation of the ternary TiAlN MAX phase through solid state reaction of both unmilled and milled powders were carried out by hot pressing under 15 or 30 MPa at 1200 °C for 2 h. The microstructure of precursor powder mixtures and the consolidated samples was characterized by using X-ray diffraction (XRD)and a scanning electron microscope equipped with an energy dispersive X-ray spectroscopy (SEM/EDS). The X-ray diffraction patterns were fitted using the Rietveld refinement for phase quantification and to determine their most important microstructural parameters. Microstructure and mechanical properties of the consolidated samples were correlated with the load used for the hot pressing process. The substantial increase of hardness, the higher densification and the lower grain sizes observed in the samples prepared from the activated powders were attributed to the formation of second phases like Ti5Si3 and Al2O3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Barsoum · 2013
2. Elastic and mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
3. The MN+ 1AXN phases: a new class of solids: thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
4. MAX phases: bridging the gap between metals and ceramics
5. Dense and high-stability Ti2AlN MAX phase coatings prepared by the combined cathodic arc/sputter technique10.1016/j.apsusc.2016.11.183 ↗
6. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics: a review10.1016/S1005-0302(10)60064-3 ↗
7. SHS of high-purity MAX compounds in the Ti-Al-C system10.3103/S1061386208020088 ↗
8. The Mn+ 1AXn phases: materials science and thin-film processing10.1016/j.tsf.2009.07.184 ↗
9. The ternary system titanium-aluminum-nitrogen10.1016/0022-4596(84)90100-2 ↗
10. Thermodynamic analysis of the Ti-Al-N system
11. Processing and characterization of Ti 2 AlC, Ti 2 AlN, and Ti 2 AlC 0.5 N 0.510.1007/s11661-006-0243-3 ↗
12. Electronic and thermal properties of Ti 3 Al (C 0.5, N 0.5) 2, Ti 2 Al (C 0.5, N 0.5) and Ti 2 AlN10.1063/1.2979326 ↗
13. Fabrication of Ti2AlN by mechanical alloying and hot press sintering
14. Synthesis and microstructure of layered-ternary Ti2AlN ceramic10.1016/j.scriptamat.2007.01.049 ↗
15. Synthesis of high-purity Ti2AlN ceramic by hot pressing10.1016/S1003-6326(08)60015-1 ↗
16. The emergence for multilamellar Ti–Al–N solid solution in Ti/AlN composites sintered at various temperatures10.1111/jace.14464 ↗
17. Layered machinable ceramics for high temperature applications10.1016/S1359-6462(96)00418-6 ↗
18. Effect of shock‐activation on post‐shock reaction synthesis of ternary ceramics
19. Reaction synthesis of the Ti2AlN MAX-phase10.3103/S1067821217030087 ↗
20. Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti2AlN ceramics10.1016/j.actamat.2011.11.010 ↗
21. Synthesis of high-purity bulk Ti2AlN by spark plasma sintering (SPS)10.1016/j.ceramint.2007.04.009 ↗
22. Reactive consolidation of layered-ternary Ti2AlN ceramics by spark plasma sintering of a Ti/AlN powder mixture10.1016/j.jeurceramsoc.2010.11.018 ↗
23. Synthesis of AlN–TiN nanostructured composite powder by reactive ball milling and subsequent thermal treatment10.1016/j.jallcom.2010.07.037 ↗
24. Mechanically activated powder metallurgy processing: a versatile way towards nanomaterials synthesis
25. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
26. Study on the microstructural evolution of Ti-Nb based alloy obtained by high-energy ball milling10.1016/j.jallcom.2017.05.262 ↗
27. Reactions of Ti and Zr with AlN and Al2O310.1016/0956-7151(92)90266-H ↗
28. Interfacial structure and reaction mechanism of AlN/Ti joints10.1023/A:1018639525958 ↗
29. Production of Al2O3–Ti2AlN composite with novel combination of high temperature properties10.1016/j.msea.2014.03.101 ↗
30. German · 1996
31. Solid-state phase equilibria in the Titanium-Aluminum-Nitrogen system10.1007/s11669-004-0134-5 ↗
32. Formation of TiAl–Ti5Si3 and TiAl–Al2O3 in situ composites by combustion synthesis10.1016/j.intermet.2007.07.016 ↗
33. Progress in research and development on MAX phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
34. Barsoum · 2001
35. Phase evolution and properties OF TlgAlN based materials. Obtained BY SHS method