Tensile fracture behavior and strength distribution of SiCf/SiC composites with different SiBN interface thicknesses
Source abstract
Abstract
Abstract The borosilicate nitride (SiBN) interface was firstly fabricated in SiC fibers reinforced SiC matrix (SiCf/SiC) composites by low-pressure chemical vapor infiltration (LPCVI). Tensile fracture behavior and strength distribution of SiCf/SiC composites with different SiBN thicknesses were investigated. The results showed that the tensile strength first increased and then declined with increasing interface thickness. The maximum value of tensile strength was 550.8 MPa with a 1000 nm SiBN interface. Non-brittle tensile fracture behavior of SiCf/SiC composites with a SiBN interface was demonstrated. The pull-out length and amount of fibers had a similar variation trend with increasing interface thickness. Strength distributions of SiCf/SiC composites with different interface thicknesses followed Weibull distribution with two parameters. Weibull modules of tensile strength increased first, and then decreased with increasing interface thickness. The maximum value of the Weibull module was 11.0224 when the interface thickness was 1000 nm, which indicated the highest reliability of SiCf/SiC composites. The mean value of tensile strength for SiCf/SiC composite with 1000 nm interface was 576.82 MPa obtained by the theory calculation, which was consistent with the result of experiment (550.8 MPa) very well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC composite10.1016/S0921-5093(03)00206-5 ↗
2. SiC-matrix composites: nonbrittle ceramics for thermo-structural application10.1111/j.1744-7402.2005.02009.x ↗
3. Current status and prospects of SiCf/SiC for fusion structural applications10.1016/j.jeurceramsoc.2013.02.013 ↗
4. Silicon carbide composites as fusion power reactor structural materials10.1016/j.jnucmat.2011.03.005 ↗
5. Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process10.1016/j.ceramint.2010.05.014 ↗
6. Single- and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview10.1111/j.1744-7402.2009.02424.x ↗
7. Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI10.1016/j.jeurceramsoc.2010.12.018 ↗
8. Tensile stress rupture of SiCf/SiCm minicomposites with carbon and boron nitride interphases at elevated temperatures in air10.1111/j.1151-2916.1997.tb03087.x ↗
9. coating of ceramic SiC, SiBNC, and Al2O3 fibers with SiBN using a continuous CVD process-influence of stoichiometryon stability against oxidation and hydrolysis10.1002/cvde.200706626 ↗
10. A pervasive mode of oxidative degradation in a SiC–SiC composite10.1111/j.1151-2916.1998.tb02696.x ↗
11. High-temperature oxidation of boron Nitride: II, boron nitride layers in composites10.1111/j.1151-2916.1999.tb01944.x ↗
12. H.P. Baldus, G. Passing, Studies on SiBN(C)-ceramics: oxidation- and crystallization behavior lead the way to applications, MRS Proceedings, Cambridge University Press, vol. 346, 1, 1994.
13. F.I. Hurwitz, J.M. Scott, P.V. Chayka, Progress on BN and doped-BN coatings on woven fabrics, in: 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings, John Wiley & Sons, Inc., 2008, pp. 389–397.10.1002/9780470294680.ch46 ↗
14. A.W. Moore, H..Sayir, S.C. Fanner, G.N. Morscher, Improved interface coatings for SiC fibers in ceramic composites, in: Proceedings of the 19th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-A: Ceramic Engineering and Science Proceedings, vol. 16, 1995, pp. 409–416.10.1002/9780470314715.ch45 ↗
15. Z. Li, Process and Structure of SiBN Interphase Manufactured by CVD/CVI, Master thesis, Northwestern Polytechnical Unversity, March, 2014, 15-24. (in Chinese)
16. Micro/minicomposites: a useful approach to the design and development of non-oxide CMCs10.1016/S1359-835X(98)00147-X ↗
17. Failure mechanisms and damage evolutionin crossply ceramic-matrix composites10.1016/0020-7683(94)00125-G ↗
18. Fracture behavior and mechanism of 2D C/SiC–BCx composite at room temperature10.1016/j.msea.2010.10.045 ↗
19. Flexural strength distribution of 3d hi-Nicalon/SiC in three point bending test at room temperature