Mechanism of vertical crack formation in Yb2SiO5 coatings deposited via plasma spray-physical vapor deposition
Source abstract
Abstract
Plasma spray-physical vapor deposition (i.e., PS-PVD) is a promising method for obtaining advanced environmental barrier coatings (EBCs). The EBCs must meet some requirements in the application, in which the thermal cycle performance affects the service lifetime. The preparation of artificial vertical cracks in Yb2SiO5 coatings is an effective approach for meeting the requirements above because vertical cracks provide a strain tolerance. To clarify the formation mechanism of vertical cracks during the PS-PVD, the effects of coating thickness and substrate temperature on the formation of vertical cracks were investigated. In addition, the interactions of spray powder and plasma flame during coating deposition were also characterized by optical spectroscopy. It is indicated that vertical cracks are formed due to a thermal expansion mismatch between Yb2SiO5 and mullite coating, transient cooling after deposition and the nucleation of evaporated Yb2SiO5 as well.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
2. Advances on strategies for searching for next generation thermal barrier coating materials10.1016/j.jmst.2018.11.016 ↗
3. High temperature oxidation behavior of CVD β-SiC seal coated SiCf/SiC composites in static dry air and combustion environment10.1016/j.ceramint.2017.04.125 ↗
4. Mechanical properties and real-time damage evaluations of environmental barrier coated SiC/SiC CMCs subjected to tensile loading under thermal gradients10.1016/j.surfcoat.2015.07.042 ↗
5. Mechanisms of ytterbium monosilicate/mullite/silicon coating failure during thermal cycling in water vapor10.1111/jace.13792 ↗
6. Investigation of a single-layer EBC deposited on SiC/SiC CMCs: Processing and corrosion behavior in high-temperature steam10.1016/j.jeurceramsoc.2018.12.019 ↗
7. Water vapor corrosion behavior and failure mechanism of plasma sprayed mullite/Lu2Si2O7-Lu2SiO5 coatings10.1016/j.ceramint.2018.05.020 ↗
8. Mechanical and thermal properties of Yb2SiO5: a promising material for T/EBCs applications10.1111/jace.14085 ↗
9. CMAS corrosion and thermal cycle of Al-modified PS-PVD environmental barrier coating10.1016/j.ceramint.2018.06.019 ↗
10. Damge tolerance and extensive plastic deformation of β-Yb2Si2O7 from room to high temperatures10.1111/jace.13702 ↗
11. Mechanisms governing the failure modes of dense vertically cracked thermal barrier coatings10.1016/j.engfracmech.2017.11.037 ↗
12. Yb2Si2O7 environmental barrier coatings deposited by various thermal spray techniques: a preliminary comparative study10.1007/s11666-017-0574-1 ↗
13. Multilayer, multimaterial thermal barrier coating systems: design, synthesis, and performance assessment10.1111/jace.13563 ↗
14. Formation of vertical cracks in solution-precursor plasma-sprayed thermal barrier coatings10.1016/j.surfcoat.2006.01.020 ↗
15. Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings10.1007/s10853-015-9358-5 ↗
16. Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials10.1016/j.surfcoat.2013.09.010 ↗
17. Examination of substrate surface melting-induced splashing during splat formation in plasma spraying10.1361/105996306X146947 ↗
18. Sintering induced the failure behavior of dense vertically crack and lamellar structured TBCs with equivalent thermal insulation performance10.1016/j.ceramint.2017.08.092 ↗
19. Thermal stability and mechanical properties of thick thermal barrier coatings with vertical type cracks10.1016/S1003-6326(14)63284-2 ↗
20. Transport and deposition behaviors of vapor coating materials in plasma spray-physical vapor deposition10.1016/j.apsusc.2019.04.224 ↗
21. Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process10.1016/j.apsusc.2017.09.218 ↗
22. Gas-deposition mechanisms of 7YSZ coating based on plasma spray-physical vapor deposition10.1016/j.jeurceramsoc.2015.10.041 ↗
23. Toughness and elasticity behaviors in nano-structured 7 wt.% Y2O3-stabilized ZrO2 coating10.1016/j.surfcoat.2015.07.005 ↗
24. Plasma characteristics and plasma-feedstock interaction under PS-PVD process conditions10.1007/s11090-014-9563-z ↗
25. Interface evolution of Si/Mullite/Yb2SiO5 PS-PVD environmental barrier coatings under high temperature
26. Plasma–powder feedstock interaction during plasma spray–physical vapor deposition10.1007/s11666-016-0519-0 ↗
27. Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings10.1016/S0921-5093(98)00860-0 ↗
28. Fatigue behavior of a plasma-sprayed 8%Y2O3-ZrO2 thermal barrier coating10.1111/j.1460-2695.1997.tb01546.x ↗
29. Mechanical and thermal properties of Yb2SiO5: first-principles calculations and chemical bond theory investigations10.1557/jmr.2014.201 ↗