Sintering of zirconia ceramics by intense high-energy electron beam
Source abstract
Abstract
Abstract A comparative analysis of the efficiency of zirconia ceramics sintering by thermal method and high-energy electron beam sintering was performed for compacts prepared from commercial TZ-3Y-E grade powder. The electron energy was 1.4 MeV. The samples were sintered in the temperature range of 1200–1400 °C. Sintering of zirconia ceramics by high-energy accelerated electron beam is shown to reduce the firing temperature by about 200 °C compared to that in conventional heating technique. Ceramics sintered by accelerated electron beam at 1200 °C is of high density, microhardness and smaller grain size compared to that produced by thermal firing at 1400 °C. Electron beam sintering at higher temperature causes deterioration of ceramics properties due to radiation-induced acceleration of high-temperature recrystallization at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Subaro · 1981
2. Densification and properties of zirconia prepared by three different sintering techniques10.1016/j.ceramint.2006.07.005 ↗
3. Sintering dense nano-crystalline ceramics without final stage grain growth10.1038/35004548 ↗
4. Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection molding10.1016/j.jmatprotec.2007.04.097 ↗
5. Grain boundary diffusion driven spark plasma sintering of nanocrystalline zirconia10.1016/j.ceramint.2011.12.064 ↗
6. Spark plasma sintering of a commercially available granulated zirconia powder: 1. Sintering path and hypotheses about the mechanism(s) controlling densification10.1016/j.actamat.2007.01.048 ↗
7. Fast low-temperature consolidation of bulk nanometric ceramic materials10.1016/j.scriptamat.2005.11.015 ↗
8. Improvement of microstructural properties of 3Y-TZP materials by conventional and non-conventional sintering techniques10.1016/j.ceramint.2011.06.035 ↗
9. Characterization of ZrO2–Al2O3 composites sintered in a 2.45GHz electromagnetic field10.1007/BF02387809 ↗
10. Microwave sintering of Zirconia materials: mechanical and microstructural properties10.1111/j.1744-7402.2011.02741.x ↗
11. Studies on ionic conductivity of stabilized zirconia ceramics (8YSZ) densified through conventional and non-conventional sintering methodologies
12. Radiation-thermal sintering of europium oxide10.1007/BF00795518 ↗
13. Characteristics of the thermal and radiation-thermal sintering processes in the Eu2O3–TiO2 system, Soviet10.1007/BF00802733 ↗
14. Sintering under a high-power electron beam10.1016/0022-5088(86)90065-2 ↗
15. Radiation-thermal packing of lithium ferrite compacts10.1002/pssa.2211190203 ↗
16. Microstructure, electromagnetic and dielectric properties of zinc substituted lithium ferrites prepared by radiation-thermal heating10.1016/j.ceramint.2015.07.165 ↗
17. Yavleniye vysokotemperaturnoy radiatsionno-stimulirovannoy diffuzii inovalenntnoy primesi v ionnykh kristallakh
18. Issledovaniye radiatsionno-stimulirovannoy diffuzii inovalenntnykh primesey v ionnykh kristallakh
19. Vzaimodeystviye v sisteme NiO-Al2O3 pri obluchenii uskorennymi elektronami
20. Issledovaniye vysokotemperaturnogo massoperenosa v pole moshchnogo ioniziruyushchego izlucheniya
21. Effect of radiation-thermal treatment on oxygen diffusion in polycrystalline ferrite ceramics
22. Electron beam induced diffusion controlled reaction in solids10.1016/S0167-2738(97)00367-6 ↗
23. Electron beam stimulated chemical reaction in solids10.1007/BF02635965 ↗
24. Investigation of the process of ferrite formation in the Li2CO3-ZnO-Fe2O3 system under high-energy actions10.1007/s11182-013-0085-6 ↗
25. Physical foundations for high-temperature electron-beam modification of ceramics10.1007/BF02436157 ↗
26. Sintering kinetics and microstructure development of nanoscale Y-TZP ceramics.10.1016/0955-2219(93)90031-L ↗
27. Studies on sintering kinetics and correlation with the sinterability of 8Y zirconia ceramics based on the dilatometric shrinkage curves10.1016/j.ceramint.2012.11.095 ↗
28. Continuum mechanical description of sintering nanocrystalline zirconia
29. Activation energy for sintering of two phase alumina/zirconia ceramics10.1111/j.1151-2916.1991.tb07815.x ↗
30. Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia10.1016/S1359-6462(02)00519-5 ↗