Investigation of effects of reactive MgO on autogenous and drying shrinkage of near-neutral salt activated slag cement

Abstract Near-neutral salt activated slag cement has better performance in environmental protection and shrinkage behavior than common sodium silicate -activated slag (AAS) cement. However, the growth of mechanical performance is too slow, which limits its application. Reactive MgO can improve early mechanical properties, while it may have different effects on the shrinkage due to changes in alkali-activators. Two near-neutral salts, sodium carbonate (SC) and sodium sulfate (SS), were selected to prepare AAS cement. The influence of reactive MgO on autogenous and drying shrinkages was studied. The hydration process and pore structure were assessed with hydration heat and nitrogen adsorption, respectively. The phase composition was evaluated by thermogravimetry (TG/DTG) and X-ray diffraction (XRD). The results indicate that the addition of reactive MgO increases the autogenous shrinkage of SC and SS activated slag. This is mainly due to accelerated reaction by reactive MgO. The drying shrinkage of AAS mortars activated with SC increases first and then decreases with the increase in reactive MgO. For SS activated slag, the more the reactive MgO used, the lower the drying shrinkage is observed. This is related to the effect of reactive MgO on pore structure and hydration products. When reactive MgO increases from 2% to 10%, the mesopore in SC activated slag increases at first and then decreases, while the SS activated slag group shows a constant decrease. Reactive MgO promotes the formation of hydrotalcite in SC activated slag, while AFt is found in SS activated slag. Hydrotalcite and AFt are crystalline products, which are beneficial to inhibit drying shrinkage.