Influence of sintering process and interfacial bonding mechanism on the mechanical properties of MgO–C refractories
Source abstract
Abstract
Abstract Two kinds of MgO–C refractories were separately prepared by carbon-embedded method and high-temperature nitridation. The phase compositions, microstructures and physical properties of heat-treated samples were investigated. Specially, the relationship between interface bonding and physical properties was mainly studied. Compared with the carbon-embeded burnt samples, the nitrided samples showed higher porosity, but exhibited better mechanical properties. And a direct chemical bonding interface was formed between Si3N4 and flake graphite in the nitrided samples, which enhanced the driving force between the molecules. Based on the fact, the molecular dynamics simulation of the interface between Si3N4 and flake graphite was carried out by the Material Studio software, and the interface phase relationship was β-Si3N4 (1 1 0)//graphite (1 0 0).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Effect of Si powder-supported catalyst on the microstructure and properties of Si3N4-MgO-C refractories10.1016/j.conbuildmat.2019.117964 ↗
2. Nano carbon containing MgO-C refractory: effect of graphite content10.1016/j.ceramint.2012.02.082 ↗
3. The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories10.1016/j.jeurceramsoc.2007.07.009 ↗
4. Impact of titania nanoparticles addition on the microstructure and properties of MgO-C refractories10.1016/j.ceramint.2017.08.094 ↗
5. Corrosion behaviours of MgO-C refractories: incorporation of graphite or pyrolytic carbon black as a carbon source10.1016/j.ceramint.2018.01.097 ↗
6. Influence of additives on corrosion resistance and corroded microstructures of MgO-C refractories10.1016/S0955-2219(01)00208-4 ↗
7. Preparation and application of ZrC-coated flake graphite for Al2O3-C refractories10.1016/j.jallcom.2019.02.239 ↗
8. Wetting, spreading and corrosion behavior of molten slag on dense MgO and MgO-C refractory10.1016/j.ceramint.2018.09.234 ↗
9. Preparation of in situ grown silicon carbide whiskers onto graphite for application in Al2O3-C refractories10.1016/j.ceramint.2018.04.243 ↗
10. Effect of MgO micropowder on sintering properties and microstructures of microporous corundum aggregates10.1016/j.ceramint.2015.01.016 ↗
11. Microstructure and mechanical properties of low-carbon MgO-C refractories bonded by an Fe nanosheet-modified phenol resin10.1016/j.ceramint.2014.09.091 ↗
12. Phase and microstructural evolution of low carbon MgO-C refractories with addition of Fe-catalyzed phenolic resin10.1016/j.ceramint.2018.10.253 ↗
13. Catalytic graphitization of novolac resin for refractory applications10.1016/j.ceramint.2017.11.167 ↗
14. Graphitization of phenolic resins for carbon-based refractories10.1016/j.ceramint.2017.03.143 ↗
15. Effect of nanocarbon sources on microstructure and mechanical properties of MgO-C refractories10.1016/j.ceramint.2013.08.101 ↗
16. Oxidation resistance and microstructural evolution in MgO-C refractories with expanded graphite10.1016/j.ceramint.2016.01.169 ↗
17. Fabrication and properties of MgO-C refractories improved with expanded graphite10.1016/j.ceramint.2014.08.007 ↗
18. Effect of different metal powder anti-oxidants on N220 nano carbon containing low carbon MgO-C refractory: an in-depth investigation10.1016/j.ceramint.2016.08.185 ↗
19. Effects of alumina sources on the microstructure and properties of nitrided Al2O3-C refractories10.1016/j.ceramint.2014.12.127 ↗
20. In situ hot elastic modulus evolution of MgO-C refractories containing Al, Si or Al-Mg antioxidants10.1016/j.ceramint.2016.03.080 ↗
21. The effect of antioxidants on the oxidation behaviour of magnesia-carbon refractory bricks10.1016/j.ceramint.2006.10.004 ↗
22. Synthesis of monophase Al4O4C and the effect of Al4O4C addition to MgO-C refractory10.1016/j.jallcom.2013.06.088 ↗
23. Phase and microstructural evolution based on Al, Si and TiO2 reactions with a MgO-C resin-bonded refractory10.1016/j.ceramint.2016.06.180 ↗
24. The influence of B4C and MgB2 additions on the behavior of MgO-C bricks10.1016/j.ceramint.2012.04.009 ↗
25. Mechanical performance and oxidation resistance of SiC castables with lamellar Ti3SiC2 coatings on SiC aggregates prepared by SPS10.1016/j.jallcom.2019.03.358 ↗
26. Catalyst-assisted synthesis of α-Si3N4 in molten salt10.1016/j.ceramint.2015.10.066 ↗
27. Ni-catalyzed synthesis of hexagonal plate-like alpha silicon nitride from nitridation of Si powder in molten salt media10.1016/j.apt.2016.05.027 ↗
28. Effect of particle size and oxygen content of Si on processing, microstructure and thermal conductivity of sintered reaction bonded Si3N410.1016/j.jallcom.2014.01.131 ↗
29. Synthesis of Si3N4 powder with tunable α/β-Si3N4 content from waste silica fume using carbothermal reduction nitridation10.1016/j.powtec.2013.10.030 ↗
30. Preparation of Si3N4 porous ceramics via foam-gelcasting and microwave-nitridation method10.1016/j.ceramint.2018.06.231 ↗
31. Effects of silicon powder content on the properties and interface bonding of nitrided Al2O3-C refractories10.1016/j.matchemphys.2017.11.011 ↗
32. Sintering of Al2O3-SiC composite from sol-gel method with MgO, TiO2 and Y2O3 addition10.1016/j.ceramint.2011.01.035 ↗
33. The effects of sintering temperature on the morphology and physical properties of in situ Si3N4 bonded MgO-C refractory10.1016/j.ceramint.2017.10.058 ↗
34. Oxidation and strength retention of monolithic Si3N4 and nanocomposite Si3N4-SiC with Yb2O3 as a sintering aid10.1111/j.1151-2916.1998.tb02596.x ↗
35. Phase relations in the system Si3N4-SiO2-MgO and their interrelation with strength and oxidation10.1111/j.1151-2916.1978.tb09229.x ↗
36. Effect of microstructure on strength of Si3N4-SiC composite system10.1111/j.1151-2916.1973.tb12520.x ↗
37. The direct bonding between copper and MgO-doped Si3N410.1007/BF00580149 ↗