Effect of alumina particle size on characteristics, corrosion, and tribological behavior of Co/Al2O3 composite coatings
Source abstract
Abstract
Abstract The electrodeposition technique was used to produce Co, Co/micro-Al2O3, and Co/nano-Al2O3 coatings. The effect of particle size on current efficiency, thickness, composition, morphology, and structure of the coatings was investigated. The potentiodynamic polarization technique and electrochemical impedance spectroscopy was used to study the corrosion behavior of the coatings. Tribological behavior of the micro/nano-composite coatings was also examined, and the results were compared to the pure Co and the steel substrate. The results revealed that the incorporation of alumina nano-particles decreased the current efficiency of Co electrodeposition. Although the weight percent of the co-deposited nano-particles was much less than the micro-particles under the same electrodeposition conditions, their effect on morphology was more pronounced. The Co/micro-Al2O3 coating had a higher hardness and corrosion resistance than the other samples. The incorporation of nano-particles decreased the hardness and polarization resistance of the pure Co by about 15 and 59%, respectively. Unlike the corrosion results, both the composite coatings had better wear resistance than the pure Co film. However, the volume loss of the Co/micro-Al2O3 coating was 1.6 times lower than the Co/nano-Al2O3 electrodeposit.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Application of artificial neural networks to predict corrosion behavior of Ni–SiC composite coatings deposited by ultrasonic electrodeposition10.1016/j.ceramint.2013.10.125 ↗
2. Morphology-controlled synthesis of cobalt nanostructures by facile electrodeposition: transition from hexagonal nanoplatelets to nanoflakes10.1016/j.electacta.2016.10.117 ↗
3. Application of artificial neural networks to predict sliding wear resistance of Ni–TiN nanocomposite coatings deposited by pulse electrodeposition10.1016/j.ceramint.2014.04.005 ↗
4. Fabrication of Ni-W-B4C composite coatings and evaluation of its microhardness and corrosion resistance properties10.1016/j.ceramint.2018.02.128 ↗
5. Microstructure and corrosion properties of Ni-TiN nanocoatings prepared by jet pulse electrodeposition10.1016/j.ceramint.2017.07.117 ↗
6. Pulse electrocodeposited Ni–WC composite coating10.1080/10426914.2015.1019087 ↗
7. Composition, characteristics and tribological behavior of Cr, Co–Cr and Co–Cr/TiO2 nano-composite coatings electrodeposited from trivalent chromium based baths10.1016/j.jallcom.2015.02.119 ↗
8. Codeposition of cerium oxide with nickel and cobalt: correlation between microstructure and microhardness10.1179/026708404X1134 ↗
9. Preparation and micro mechanical properties of nano-Al2O3 particles strengthened Ni-based composite coatings10.1016/j.phpro.2013.11.036 ↗
10. Ultrasound-assisted electrodeposition of composite coatings with particles10.1016/j.surfcoat.2014.06.023 ↗
11. Deposition and characterization of nanocrystalline and amorphous Ni–W coatings with embedded alumina nanoparticles10.1016/j.ceramint.2013.03.033 ↗
12. Effect of ultrasonic power and pulse-on time on the particle content and mechanical property of Co-Cr3C2 composite coatings by jet electrodeposition10.1016/j.surfcoat.2017.06.062 ↗
13. Characteristics of electrodeposited cobalt and titania nano-reinforced cobalt composite coatings10.1016/j.surfcoat.2013.05.007 ↗
14. Electrodeposition of Co–Mn3O4 composite coatings10.1016/j.surfcoat.2015.09.011 ↗
15. Characterization and performance prediction of jet pulse electrodeposited Ni-SiC nanocomposites by means of artificial neural networks10.1016/j.ceramint.2018.02.075 ↗
16. Effects of jet rate on microstructure, microhardness, and wear behavior of jet electrodeposited Ni–SiC composites10.1016/j.ceramint.2018.01.169 ↗
17. Influence of CTAB cationic surfactant on codeposition of SiC particles with cobalt10.1179/174591910X12835095635187 ↗
18. Electrodeposition of Ni matrix composite coatings containing ZrC particles10.1179/1743294413Y.0000000185 ↗
19. Influence of SiO2 particles on zinc–nickel electrodeposition10.1179/174591907X229608 ↗
20. Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition10.1016/j.jallcom.2018.05.097 ↗
21. Electrodeposition of Co and Co composites with carbon nanotubes using choline chloride-based ionic liquids10.1016/j.surfcoat.2017.06.002 ↗
22. Cobalt electrodeposition using urea and choline chloride10.1016/j.electacta.2014.01.052 ↗
23. Electrodeposition of cobalt from citrate containing baths10.1016/j.electacta.2014.03.130 ↗
24. Influence of glycine on Co electrodeposition: IR spectroscopy and near-surface pH investigations10.1016/j.electacta.2017.12.032 ↗
25. Electrodeposition of cobalt from aqueous sulphate solutions in the presence of tetra ethyl ammonium bromide10.1016/S1003-6326(15)63814-6 ↗
26. Pulse and direct electrodeposition of Ni–Co/micro and nanosized SiO2 particles10.1080/10426914.2017.1364748 ↗
27. Influence of Cr content and initial Cr particle size on the dielectric properties of plasma-sprayed Cr/Al2O3 coatings10.1016/j.surfcoat.2017.02.007 ↗
28. Refractories containing fused and sintered alumina aggregates: investigations on processing, particle size distribution and particle morphology10.1016/j.ceramint.2016.12.067 ↗
29. Effect of bath composition and pulse electrodeposition condition on characteristics and microhardness of cobalt coatings10.1016/S1003-6326(18)64846-0 ↗
30. Effect of pH, surfactant, and heat treatment on morphology, structure, and hardness of electrodeposited Co-P coatings10.1007/s11665-015-1599-6 ↗
31. Co-ZrO2 electrodeposited composite coatings exhibiting improved micro hardness and corrosion behavior in simulating body fluid solution10.1016/j.surfcoat.2011.05.050 ↗
32. Effect of nano-TiC dispersed particles and electro-codeposition parameters on morphology and structure of hybrid Ni/TiC nanocomposite layers10.3390/ma9040269 ↗
33. Influence of process parameters on the cathode current efficiency of Zn/SiO2 electrodeposition
34. Nano-particles dispersion effect on Ni/Al2O3 composite coatings10.1016/j.matchemphys.2003.11.040 ↗
35. Effect of reinforcement particle size on fabrication and properties of composite coatings10.1080/10426914.2013.832298 ↗
36. Electrodeposition and characterization of Ni–Co/SiC nanocomposite coatings10.1016/j.jallcom.2011.07.054 ↗
37. Corrosion behaviour of electrodeposited nanocrystalline Co and Co/ZrO2 nanocomposite coatings10.1179/1743294414Y.0000000355 ↗
38. Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion10.1016/j.corsci.2019.04.006 ↗
39. Characteristics and properties of Cr coatings electrodeposited from Cr(III) baths10.1088/2053-1591/aaeb4f ↗
40. Electrochemical impedance spectroscopy study on silver coated metallic implants10.1016/j.electacta.2011.01.072 ↗
41. Comparison of the morphology and corrosion performance of Cr(VI)- and Cr(III)-based conversion coatings on zinc10.1016/j.surfcoat.2004.12.002 ↗
42. Morphology and corrosion resistance of Cr(III)-based conversion treatments for electrogalvanized steel10.1007/s11998-009-9213-1 ↗
43. EIS study on the corrosion performance of a Cr(III)-based conversion coating on zinc galvanized steel for the automotive industry10.1007/s10008-010-1140-7 ↗
44. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
45. Friction and wear properties of electrodeposited nickel–titania nanocomposite coatings10.1007/s11249-007-9254-5 ↗