Novel emission bands of Na2TiF6:Mn4+ phosphors induced by the cation exchange method
Source abstract
Abstract
Abstract A series of Na2TiF6:xMn4+ samples were prepared by the cation exchange method. Visible QC behavior and the strongest ZPL peaks were observed for these samples. The characteristic of the visible QC behavior is that PL intensity at 620 nm is 1.61 times as high as PLE intensity at 476 nm. The mechanisms of these phenomena were discussed, and the color purity, crystal-field and nephelauxetic effect, the critical distance and the multipolar interaction for the samples were determined. The result shows that the Mn4+ ions are located at a strong crystal field and the concentration quenching of Mn4+ is from the quadrupole-quadrupole interaction. The slightly increase of nephelauxetic ratio causes the slightly blue shift of emission. The color-purity and chromaticity coordinates of the optimal sample suggests that the strongest ZPL makes its red emission with high color-purity. Thus, Na2TiF6:0.08Mn4+ is a potential red-emitting phosphor for blue light-based WLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Inorganic Fluorides and Related Compounds · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Enhanced red emission for BaSiF6: Mn4+ hexagonal nanorod phosphor via using spherical silica10.1016/j.matlet.2018.03.152 ↗
2. Luminescent properties and application of Rb2GeF6: Mn4+ red phosphor10.1016/j.matlet.2017.07.086 ↗
3. Enhanced luminous efficiency of deep red emitting K2SiF6: Mn4+ phosphor dependent on KF ratio for warm-white LED10.1016/j.matlet.2014.11.025 ↗
4. Cation exchange synthesis and cations doped effects of red-emitting phosphors K2TiF6:Mn4+,M2+( M= Mg, Ca, Sr, Ba, and Zn)10.1007/s10854-017-6996-1 ↗
5. Narrow red emission band fluoride phosphor KNaSiF6:Mn4+ for warm white light-emitting diodes10.1021/acsami.6b01905 ↗
6. K2MnF5·H2O as reactant for synthesizing highly efficient red emitting K2TiF6: Mn4+ phosphors by a modified cation exchange approach10.1016/j.matchemphys.2016.08.022 ↗
7. Research progress and application prospects of transition metal Mn4+-activated luminescent materials10.1039/C6TC02496C ↗
8. Research progress and application prospects of transition metal Mn4+-activated luminescent materials10.1039/C5TC02290H ↗
9. Properties of SiAlON powder phosphors for white LEDs10.1016/j.jeurceramsoc.2011.05.050 ↗
10. Synthesis and photoluminescence of Eu3+-activated double perovskite NaGdMg (W, Mo)O6–a potential red phosphor for solid state lighting10.1039/C2TC00189F ↗
11. Properties of Mn4+-activated hexafluorotitanate phosphors10.1149/1.3530793 ↗
12. Red-emitting phosphors Na2XF6: Mn4+ (X= Si, Ge, Ti) with high colour-purity for warm white-light-emitting diodes10.1039/C5RA10568D ↗
13. Co-precipitation synthesis and luminescence properties of Na2TiF6:Mn4+ red phosphors for warm white light emitting diodes
14. Control of luminescence by tuning of crystal symmetry and local structure in Mn4+ -activated narrow band fluoride phosphors10.1002/anie.201708814 ↗
15. Integrated surface modification to enhance the luminescence properties of K2TiF6:Mn4+ phosphor and its application in white-light-emitting diodes10.1021/acsami.8b12170 ↗
16. Highly efficient non-rare-earth red emitting phosphor for warm white light-emitting diodes10.1038/ncomms5312 ↗
17. Waterproof narrow-band fluoride red phosphor K2TiF6:Mn4+ via facile superhydrophobic surface modification10.1021/acsami.7b15503 ↗
18. A set of manganese ion activated fluoride phosphors (A2BF6:Mn4+, A = K, Na, B = Si, Ge, Ti): synthesis below 0 °C and efficient room-temperature photoluminescence10.1039/C6TC02737G ↗
19. Visible quantum cutting in LiGdF4: Eu3+ through downconversion10.1126/science.283.5402.663 ↗
20. Visible quantum cutting through downconversion in Eu3+-doped K2GdZr (PO4)3 phosphor10.1016/j.matchemphys.2009.08.058 ↗
21. Recent progress in quantum cutting phosphors10.1016/j.pmatsci.2009.10.001 ↗
22. Visible quantum cutting in BaGd2ZnO5: Eu3+ phosphor10.1016/j.ceramint.2011.12.068 ↗
23. White light emission., quantum cutting., and afterglow luminescence of Eu3+-doped Ba5Gd8Zn4O2110.1016/j.jallcom.2013.04.193 ↗
24. Phase selective synthesis of quantum cutting nanophosphors and the observation of a spontaneous room temperature phase transition10.1039/C6NR00172F ↗
25. Visible quantum cutting through downconversion in green-emitting K2GdF5:Tb3+ phosphors10.1063/1.2358193 ↗
26. Visible quantum cutting in green–emitting BaGdF5:Tb3+ phosphors via downconversion10.1016/j.jlumin.2006.01.326 ↗
27. Visible quantum cutting through downconversion in GdPO4:Tb3+ and Sr3Gd (PO4) 3: Tb3+10.1016/j.jssc.2009.05.026 ↗
28. Vacuum ultraviolet−visible spectroscopic properties of Tb3+ in Li(Y, Gd)(PO3)4: tunable emission., quantum cutting., and energy transfer10.1021/jp100755d ↗
29. Visible quantum cutting through downconversion in GdBO3:Tb3+10.1149/2.007203esl ↗
30. Investigation on visible quantum cutting of Tb3+ in oxide hosts10.1063/1.4867612 ↗
31. High efficiency green phosphor Ba9Lu2Si6O24:Tb3+: visible quantum cutting via cross-relaxation energy transfers10.1021/acs.jpcc.5b11790 ↗
32. Cation composition sensitive visible quantum cutting behavior of high efficiency green phosphors Ca9Ln(PO4)7:Tb 3+ (Ln= Y, La, Gd)10.1039/C6TC03982K ↗
33. Visible quantum cutting in Tb3+ doped BaGdF5 phosphor for plasma display panel
34. UV Emission of Gd3+ in the presence of Cu2+: towards luminescence quenching through quantum cutting?10.1002/cphc.201500117 ↗
35. Optimized photoluminescence of red phosphor Na2SnF6:Mn4+ as red phosphor in the application in “warm” white LEDs10.1111/jace.14708 ↗
36. The formation of KF induced red-emitting phosphors K2TiF6·BaF (HF 2): Mn 4+ by cation exchange
37. Preparation of a novel red Rb2SiF6: Mn4+ phosphor with high thermal stability through a simple one-step approach10.1039/C5TC01396H ↗
38. Designed synthesis, morphology evolution and enhanced photoluminescence of a highly efficient red dodec-fluoride phosphor., Li3Na3Ga2F12:Mn4+., for warm WLEDs
39. Design, preparation, and optimized luminescence of a dodec-fluoride phosphor Li3Na3Al2F12:Mn4+ for warm WLED applications10.1039/C7TC03805D ↗
40. Influence of covalency on the Mn4+ 2Eg→4A2g emission energy in crystals
41. Facile synthesis., morphology and photoluminescence of a novel red fluoride nanophosphor K2NaAlF6: Mn4+10.1039/C7TC01074E ↗
42. Energy transfer in oxidic phosphors10.1016/0375-9601(68)90486-6 ↗