journal article·2018-09

Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: Comparison of hot isostatic pressing and spark plasma sintering techniques

M. Farvizi, M. Kahkhaei Javan, M.R. Akbarpour, H.S. Kim

Ceramics International· Volume 44· Issue 13
Publisher page

Abstract

Abstract To escape the detrimental effect of NiTi matrix decomposition on hot-isostatic-pressing (HIP)-processed NiTi-nano alumina composites, which leads to the formation of NiTi 2 /Ni 3 Ti intermetallics; in this study, spark plasma sintering (SPS) was utilized to restrict this phenomenon in NiTi and NiTi-6 wt% nano alumina composites. After optimization of the SPS processing conditions, the microstructural aspects of the SPS and HIP-consolidated samples were compared. According to X-ray diffraction analysis, the SPS-processed composites contained more B2-NiTi phase than the HIP-processed samples did. This is because of lower NiTi matrix decomposition due to formation of NiTi 2 /Ni 3 Ti phases. Scanning electron microscopy studies revealed that at the interface of alumina and the NiTi matrix, Ti-rich phases had evolved, while in the grain interiors, matrix decomposition mostly led to the formation of Ni-rich intermetallics. High-resolution transmission electron microscopy investigations confirmed an increased Ni/Ti ratio in the austenitic NiTi matrix in the vicinity of the Ti-rich phases, and the formation of martensitic NiTi near the Ni-rich phases. The results from differential scanning calorimetry indicated that the latent heat of martensitic transformation in the SPS composite is higher than that of HIP-processed composite samples due to lower matrix decomposition and higher NiTi phase, which can participate in martensitic transformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Physical metallurgy of Ti-Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
2. Review and perspectives: shape memory alloy composite systems10.1007/s00707-015-1433-0 ↗
3. Assessing the biocompatibility of NiTi shape memory alloys used for medical applications10.1007/s00216-004-2888-3 ↗
4. Corrosion resistance of porous NiTi biomedical alloy in simulated body fluids10.1088/0964-1726/25/9/095024 ↗
5. Effect of high-pressure torsion on the microstructure and wear behavior of NiTi alloy10.1007/s12540-015-5098-y ↗
6. Wear behavior of a TiNi alloy10.1016/0043-1648(96)06989-X ↗
7. Wear behavior of austenitic NiTi shape memory alloy10.1007/s40830-015-0008-1 ↗
8. Nano-sized SiC particle reinforced NiTi alloy matrix shape memory composite10.1016/j.matlet.2013.02.113 ↗
9. Wear and friction of a new wear-resistant material: TiNi-based composites10.1016/S0266-3538(00)00192-5 ↗
10. Effects of ZrW2O8 and tungsten additions on the temperature range in which a pseudoelastic TiNi alloy retains its maximum wear resistance10.1016/j.wear.2007.01.065 ↗
11. Improving wear resistance of TiNi matrix composites reinforced by carbon nanotubes and in situ TiC10.1016/j.scriptamat.2011.01.009 ↗
12. Effect of nano Al2O3 addition on mechanical properties and wear behavior of NiTi intermetallic10.1016/j.matdes.2013.03.099 ↗
13. Effect of starting materials on the wear performance of NiTi-based composites10.1016/j.wear.2015.04.011 ↗
14. Microstructural characterization of HIP consolidated NiTi-nano Al2O3 composites10.1016/j.jallcom.2014.03.184 ↗
15. Challenges of using elemental nickel and titanium powders for the fabrication of monolithic NiTi parts10.1515/amm-2017-0157 ↗
16. Phase formation of Ni-Ti via solid state reaction
17. Mechanism of spark plasma sintering and its application to ceramics
18. Heating mechanism of spark plasma sintering10.1016/j.ceramint.2012.07.080 ↗
19. Trends in advanced SPS spark plasma sintering systems and technology, functionally gradient materials and unique synthetic processing methods from next generation of powder technology10.4164/sptj.30.11_790 ↗
20. Water jet erosion behavior of Ti–Ni binary alloys10.1016/0043-1648(91)90064-2 ↗
21. A phase mixture model of a particle reinforced composite with fine microstructure10.1016/S0921-5093(99)00281-6 ↗
22. Effect of nano-hydroxyapatite reinforcement in mechanically alloyed NiTi composites for biomedical implant10.1016/j.msec.2016.05.092 ↗
23. Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites10.1016/j.jallcom.2014.04.224 ↗
24. NiTi and NiTi-TiC composites: transformation and thermal cycling behavior10.1007/BF02669642 ↗
25. Determination of heat of transformation in a cold-rolled martensitic TiNi alloy10.1007/BF02657316 ↗
26. Thermo-mechanical response and damping behavior of shape memory alloy/MAX phase composites10.1007/s11661-014-2193-5 ↗