Nanostructured monticellite for tissue engineering applications - Part I: Microstructural and physicochemical characteristics

Abstract In this study, nanostructured monticellite (CaMgSiO4) bioceramics were prepared via sintering the sol–gel-derived monticellite powder compacts at 1200 °C. The mean of particles size distribution of the synthesized monticellite powders was approximately 90 nm. After evaluating physicochemical characteristics of the synthesized bioceramics, apatite-forming ability of the samples were examined in simulated body fluid (SBF) for different time periods. The soaking effect of various time periods on the X-ray diffraction (XRD) patterns, followed by the calculations from scherrer's equation, showed that the crystallite size of the immersed monticellite ceramics in SBF for 3 and 7 days was around 88 nm. Williamson-Hall analysis was also used to calculate the lattice strain of the samples. Based on the results, by changing the soaking time, crystallite size and lattice strain have meaningfully changed. The release of Ca, Mg and Si ions from the nanostructured monticellite significantly promoted cell proliferation and growth at a certain concentration range more than that of positive and negative controls. This study could provide an in-depth understanding of the microstructural and physicochemical characteristics of this class of biomaterials. The follow-up studies should correlate the microstructural and physicochemical properties to the molecular and biological characteristics for applications in tissue engineering and regenerative medicine.