Study of the structure, properties, scratch resistance and deformation behaviour of graded Cr-CrN-Cr(1-x)AlxN coatings
Source abstract
Abstract
Abstract An in-depth investigation of the structure, properties, scratch adhesion characteristics of graded Cr-CrN-Cr(1-x)AlxN coatings synthesized onto M42 steel substrates using closed – field unbalanced magnetron sputtering (CFUBMS) was carried out. Advanced microscopy (scanning and transmission electron microscopy), focused ion beam (FIB) imaging, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and micro–scratch tests was used to investigate the microstructure, mechanical properties and scratch performance as a function of Al content. FIB and TEM investigations revealed that the coatings exhibited a distinct structure; i.e., an adhesive Cr layer, a CrN transition layer and a graded CrAlN top layer with a face centered cubic (FCC) B1 structure. A columnar morphology was exhibited by the coatings and the dimensions of the columnar grains decreased with increasing Al content. Residual stress measurements, obtained from the XRD – sin2ψ method, revealed increasing compressive stresses with increasing Al content. Furthermore, nanoindentation tests showed an increase in mechanical properties, fracture toughness index (H/E) and plastic deformation resistance (H3/E2) as the Al content increased, accompanied by a decrease in the critical load, LC, during scratch testing implying a decrease in scratch toughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
2. Magnetron sputtering of Cr(Al)N coatings: mechanical and tribological study10.1016/j.surfcoat.2005.02.105 ↗
3. Sputtering power effects on growth and mechanical properties of Cr2AlC MAX phase coatings10.3390/met6110265 ↗
4. Chemical and morphological characterization of magnetron sputtered at different bias voltages Cr-Al-C coatings10.3390/ma10020156 ↗
5. Substrate frequency effects on CrxN coatings deposited by DC magnetron sputtering10.1007/s11665-016-2426-4 ↗
6. Effect of hydrogen exposure on mechanical and tribological behavior of CrxN coatings deposited at different pressures on IN71810.3390/ma10050563 ↗
7. EIS comparison on corrosion performance of PVD TiN and CrN coated mild steel in 0.5 N NaCl aqueous solution10.1016/S0010-938X(00)00188-8 ↗
8. A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings10.1016/j.surfcoat.2006.03.037 ↗
9. Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2009.03.038 ↗
10. Mechanical and tribological properties of compositionally graded CrAlN films deposited by AC reactive magnetron sputtering10.1016/j.surfcoat.2007.07.060 ↗
11. Effects of Al contents on microstructures of Cr1−XAlXN and Zr1−XAlXN films synthesized by cathodic arc method10.1016/j.surfcoat.2004.08.208 ↗
12. Mechanical behavior and oxidation resistance of Cr(Al)N coatings10.1116/1.1946711 ↗
13. High temperature corrosion behavior of a multilayer CrAlN coating prepared by magnetron sputtering method on a K38G alloy10.1016/j.surfcoat.2007.08.025 ↗
14. Development of advanced duplex surface systems by combining CrAlN multilayer coatings with plasma nitrided steel substrates10.1016/j.surfcoat.2013.07.017 ↗
15. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering10.1016/j.actamat.2012.06.049 ↗
16. The development of a nanostructured, graded multilayer Cr-Cr x N y -Cr1-x Al x N coating produced by pulsed closed field unbalanced magnetron sputtering (P-CFUBMS) for use in aluminum pressure die casting dies10.1166/jnn.2009.NS25 ↗
17. A study of AC reactive magnetron sputtering technique for the deposition of compositionally graded coating in the Cr–Al–N system10.1016/j.surfcoat.2006.08.079 ↗
18. An overview of the potential of quantitative coating adhesion measurement by scratch testing10.1016/j.triboint.2005.04.013 ↗
19. A comparative study of adhesion test methods for hard coatings10.1016/S0257-8972(98)00827-5 ↗
20. New developments in the modelling of the hardness and scratch adhesion of thin films10.1016/0257-8972(90)90121-R ↗
21. Influence of mechanical properties on the nanoscratch behaviour of hard nanocomposite TiN/Si 3 N 4 coatings on Si10.1088/0022-3727/39/7/009 ↗
22. Effects of indenter radius on the critical load in scratch testing10.1016/S0257-8972(02)00718-1 ↗
23. Mechanisms of coating failure as demonstrated by scratch and indentation testing of TiN coated HSS10.1179/026708400101517350 ↗
24. Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests10.1016/j.surfcoat.2015.11.040 ↗
25. The application of focused ion beam technology to the characterization of coatings10.1016/j.surfcoat.2004.10.042 ↗
26. High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique10.1016/j.surfcoat.2010.07.108 ↗
27. Noyan · 1987
28. Practical measurement of the residual stress in coatings10.1016/0257-8972(95)02531-6 ↗
29. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
30. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
31. Wear behavior of graded Cr-CrN-Cr(1−x)Al(x)N coatings synthesized by closed-field unbalanced magnetron sputtering for advanced machining operations10.1016/j.ceramint.2018.01.199 ↗
32. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
33. Effects of laminate architecture on fracture resistance of sponge biosilica: lessons from nature10.1002/adfm.200701135 ↗
34. Analysis of an ultra hard magnetic biomineral in chiton radular teeth10.1016/S1369-7021(10)70016-X ↗
35. Enhancing toughness of CrN coatings by Ni addition for safety-critical applications10.1016/j.msea.2013.12.064 ↗
36. Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load10.1016/0040-6090(87)90377-4 ↗
37. Toughness measurement of thin films: a critical review10.1016/j.surfcoat.2004.10.021 ↗
38. Failure modes in scratch adhesion testing10.1016/0257-8972(91)90188-3 ↗
39. Failure mode maps in the thin film scratch adhesion test10.1016/S0301-679X(97)00012-1 ↗
40. 〈http://webbook.nist.gov〉.
41. 〈https://srdata.nist.gov〉.
42. McHale · 1994 · vol. X
43. Investigation of the properties of Al1−xCrxN coatings prepared by cathodic arc evaporation10.1016/j.surfcoat.2005.01.043 ↗
44. Structure and mechanical properties of Cr–Zr–N films synthesized by closed field unbalanced magnetron sputtering with vertical magnetron sources10.1016/j.surfcoat.2005.08.101 ↗
45. Stress and microstructure in tungsten sputtered thin films10.1116/1.575770 ↗
46. Intrinsic stress in sputtered thin films10.1116/1.577295 ↗
47. The microstructure of sputter‐deposited coatings10.1116/1.573628 ↗
48. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering10.1016/j.actamat.2012.06.049 ↗
49. Holmberg · 2009
50. Friction and wear of coated surfaces — scales, modelling and simulation of tribomechanisms10.1016/j.surfcoat.2007.07.105 ↗
51. Tribological analysis of TiN and DLC coated contacts by 3D FEM modelling and stress simulation10.1016/j.wear.2006.12.084 ↗
52. Scratch adhesion and tribological behaviour of graded Cr/CrN/CrTiN coatings synthesized by closed-field unbalanced magnetron sputtering10.1016/j.wear.2017.03.020 ↗
53. Scratch adhesion characteristics of PVD TiAlN deposited on high speed steel, cemented carbide and PCBN substrates10.1016/j.wear.2013.08.025 ↗
54. Surface fracture toughness measurement by the scratch test method
55. Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests10.1016/j.surfcoat.2015.11.040 ↗
56. The development of a nanostructured, graded multilayer Cr-Cr x N y -Cr1−x Al x N coating produced by pulsed closed field unbalanced magnetron sputtering (P-CFUBMS) for use in aluminum pressure die casting dies10.1166/jnn.2009.NS25 ↗
57. Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation10.1016/j.surfcoat.2015.04.001 ↗
58. Relationship between mechanical properties of thin nitride-based films and their behaviour in nano-scratch tests10.1016/j.triboint.2010.12.002 ↗
59. Ion assisted deposition of titanium chromium nitride10.1016/j.tsf.2005.05.005 ↗
60. V.M. Vishnyakov, B.D. Beake, S.V. Chornobuk, O.J. Popov, Crack resistance in ceramics – from thin films to bulk materials, in: Proceedings of the 58th Technical Conference, Society of Vacuum Coaters, 2015.10.14332/svc15.proc.1930 ↗
61. Hard and superhard nanocomposite coatings10.1016/S0257-8972(99)00586-1 ↗