Fabrication of Si2N2O ceramic with silicon kerf waste as raw material
Source abstract
Abstract
Abstract SiC and Si in silicon kerf waste of photo-voltaic (PV) industry produced by a slurry technology are difficult to be separated for recycling due to their similar density and particle sizes. In this work, silicon kerf waste after removing the glycol and metal was characterized, then used as raw material for producing Si 2 N 2 O ceramics. In the silicon kerf waste, besides SiC and Si, amorphous SiO 2 exist because of the reaction of Si with water during the storage time. Thermodynamic calculation showed that, ascribing to the reaction of Si, N 2 with SiO 2 and the reaction of SiC, N 2 with SiO 2 at high temperature in N 2 atmosphere, the Si was exhausted and the SiC was decreased to form the Si 2 N 2 O. With the content of sintering additives increasing, the porosity of the samples was decreased, the bulk density was increased, and the strength of the samples was increased. It would be a reasonable method for fully utilizing the silicon kerf waste to fabricate Si 2 N 2 O composite ceramic without separating the SiC and Si.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Use of a thermal plasma process to recycle silicon kerf loss to solar-grade silicon feedstock10.1016/j.seppur.2016.02.005 ↗
2. Removal of silicon carbide from kerf loss slurry by Al-Si alloying process10.1016/j.seppur.2012.01.021 ↗
3. Silicon recovery from cutting slurry by phase transfer separation10.1016/j.seppur.2014.06.037 ↗
4. Beneficial and technological analysis for the recycling of solar grade silicon wastes10.1007/s11837-011-0006-5 ↗
5. G. Gaudet S. Grumbine N. Naguib F. Batllo Wire Saw Slurry Recycling Process Cabot Microletronics Corporation, US, US20090293369A1.
6. K. Toyama System for Reusing Oily Supply Waste Fluid Shin-Estu Handotai Co., Ltd., US, US5830369A.
7. C. Zavattari G. Fragiacomo Method for the Separation, Regeneration and Reuse of an Exhausted Glycol-based Slurry MEMC Electronic Materials, Inc. US, US6231628B1.
8. Recovery of polyalkylene glycol from silicon cutting waste using centrifugation10.1080/19443994.2014.936518 ↗
9. K.S. Chang Separation of Waste Cutting Oil Generated from Solar Wafer Slicing Process National United University, Taiwan, TW201120206A1.
10. Iang · 2012
11. Assessment of the recovery of photovoltaic cells cutting fluid by chemical pretreatment and ultrafiltration10.1080/19443994.2012.694215 ↗
12. Liu · 2011
13. T. Yao Method for Recovering Water-soluble Cutting Fluid Form Silicon Wafer Cutting Fluid Zhejiang Haoyu New Energy and Materials Co. Ltd., China, CN102746934B.
14. A novel approach for recycling of kerf loss silicon from cutting slurry waste for solar cell applications10.1016/j.jcrysgro.2008.04.031 ↗
15. Pretreatment of recycling wiresaw slurries-Iron removal using acid treatment and electrokinetic separation10.1016/j.seppur.2009.04.004 ↗
16. Recovery of silicon powder from kerf loss slurry by centrifugation10.1016/j.powtec.2010.02.028 ↗
17. Recovery of silicon powder from kerfs loss slurry using phase-transfer separation method10.1016/j.seppur.2010.06.002 ↗
18. Effect of wet oxidation on recovery of silicon from wire saw slurry by liquid-liquid extraction10.1016/j.seppur.2015.06.019 ↗
19. Silicon sawing waste treatment by electrophoresis and gravitational settling10.1016/j.jhazmat.2011.02.070 ↗
20. Separation of silicon and silicon carbide using an electrical field10.1016/j.seppur.2009.04.009 ↗
21. Modified sedimentation system for improving separation of silicon and silicon carbide in recycling of sawing waste10.1016/j.seppur.2011.01.011 ↗
22. Silicon and silicon carbide powders recycling technology from wire-saw cutting waste in slicing process of silicon ingots10.1016/j.seppur.2014.06.036 ↗
23. Recovery of silicon from kerf loss slurry waste for photovoltaic applications10.1002/pip.863 ↗
24. A rapid thermal process for silicon recycle and refining from cutting kerf-loss slurry waste10.1016/j.seppur.2015.05.030 ↗
25. Phase separation of a microsized powder mixture of Si and SiC by Cu-Si alloying10.1016/j.ces.2015.01.021 ↗
26. The thermodynamic properties of silicon oxynitride10.1111/j.1151-2916.1981.tb10333.x ↗
27. Microstructural determination in some SiC based hot gas filter materials10.1179/174367605X16572 ↗
28. X-ray powder diffraction analysis of a silicon carbide-based ceramic10.1016/S0167-577X(00)00358-X ↗
29. State of boron in chemical vapour-deposited SiC-B composite powders10.1007/BF00727857 ↗
30. An x-ray photoemission spectroscopy investigation of oxides grown on AuxSi1−xlayers10.1063/1.345610 ↗
31. Plasma cleaned Si analyzed insitu by x-ray photoelectron spectroscopy, secondary ion mass spectrometry, and actinometry10.1063/1.351373 ↗
32. Thermodynamic calculation of the Si-N-O system
33. Calculation of heterogeneous phase equilibria in the SiAlON system10.1007/BF00542737 ↗
34. Low temperature densification of silicon nitride using Li2O-based surface coatings10.1016/j.ceramint.2011.07.067 ↗
35. Study on in-situ reaction synthesis and mechanical properties of Si2N2O ceramic10.1016/j.ceramint.2012.09.082 ↗
36. Effect of additives on some properties of silicon oxynitride ceramics10.1007/BF02387726 ↗
37. The influence of different oxides on the formation of Si2N2O from SiO2 and Si3N410.1016/0955-2219(90)90028-E ↗